What is an SMTP server?

What do I put in the outgoing box which is an SMTP server

SMTP is the port for outgoing for a POP3 account in an email client. What mail client do you use? If Outlook Express:

Setting up email in Outlook Express servers:
http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx

You get your mail server account settings.

Tags: Windows

Similar Questions

  • nightmare of e-mail. What is a pop3 and smtp server.

    I can't send my resume by e-mail. I activated cleanmgr and then downloaded windows don't Live to be disappointed. When I press on send I ask several answer I provided until the pop3 and smtp protocols.

    You must set up correctly.

    Contact your ISP (Internet Service Provider).

    They offer your broad band/Dial-up connection.

    Ask them to:

    username
    password for your service account to wide band/Dial-Up with them

    Server of incoming POP3 mail
    outgoing mail SMTP server

    The above information is required to set up Windows Mail.

    ISPS are usually happy to help you set up your email account.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to connect to an smtp server

    My OS is ubuntu LTS 14.10, I use Thunderbird version 38.4.0.
    I have 2 accounts, a gmail account and an e-mail office365 account.
    Until yesterday, I could send and receive emails on both accounts, however now it fails with the following error:

    The message send failed.
    The message cannot be sent because the connection to the server failed outgoing (SMTP) smtp.googlemail.com . The server is may be unavailable or refuses the outgoing (SMTP) server connections. Check that your outgoing (SMTP) server settings are correct and try again.

    (Or a similar message when connecting to the server smtp office 365.)

    I restarted the computer, confirmed the address of server, reset passwords, confirmed that I can ping the servers.

    Any help would be greatly appreciated.

    Thank you

    Chris

    The parameters of your server for Gmail seem good. I'm not really familiar with Office365, but they are probably ok as well.

    Are there external firewall or proxy, you have to go?
    You have all this computer's Internet access?

    What is suspicious, that the two accounts are not at the same time. So my best guess is that the cause is rather external and not Thunderbird.

  • I would like to know how to prevent messages sent to be registered on the SMTP server

    Currently, my Thunderbird client saves a copy of all messages sent to the folder "sent", as expected. All sent messages are also stored on the Server SMTP (G-Mail in this case). To avoid having to delete them manually, I want to warn the outgoing message to be stored on the SMTP server in the first place. Currently, my account of Thunderbird for Copies and folders settings has a check mark next to the option 'Other' with a destination of the folder option sent in Thunderbird. I don't see any other parameters that could control how sent SMTP mail server handles. I use the POP service only with the G-Mail Server. What settings should be in place to prevent messages accumulate in the folder "sent" on the SMTP server account?

    I think I can now answer my own question! The question turns out to be a g-mail not delivered not a factor controlled by Thunderbird.

    Apparently g-mail can automatically a copy of all mail sent by SMTP service one account. It's a "feature" that cannot be disabled! A workaround seems to be to set up a filter in g-mail account settings for all mail with an address corresponding to your own email address and send the message to the trash folder. Items in the Recycle Bin are automatically deleted after 30 days. Google prevents the rule 30 days being modified by measure of security, but at least trashed messages for irrevocably removed in a month.

  • Unable to connect to smtp server

    Thunderbird worked fine yesterday but when trying to send a message this morning it says it cannot connect to the smtp server and put my password that I did - but it makes no difference.

    Thunderbird continues to operate correctly on my wifes computer and if I connect to the blank media, I can send a message from there, but still my computer it will not send and I get the same error.

    I tried to restart my computer completely and thunderbird, but it makes no difference

    Okay people, there jujst started working again - what is happening here that my wife has sent all the morning OK but mine has just started a few minutes there are - and they are both the same SMTP!

  • When you set the outgoing SMTP server, why not specifying the SMTP server 'by' is not working, but only the first specified server?

    I have several options for the outgoing SMTP server. I put a default and attempt to send. It fails and uses the first condition in the list.

    I restart Thunderbird and try to send. It uses the first condition in the list.

    I eliminated all SMTP servers in the list but the one I want, and it works.

    What escapes me, that I have observed this problem on all my systems for a long time?

    Kind regards

    Carl

    your lack of anything that account having a SMTP server associated with them, which, if your 'in' an account more wrinkles 'default '.

    Right click on a folder in account, and then select settings.
    Click on the account name in the settings and on the right is a drop down list and the value 'default' smtp for this account.

  • The iPhone Mail uses the smtp server that does not exist

    My iphone SE mail constantly uses an smtp server that is not listed anywhere, but has been used there are 2 iphones.

    I deleted the account and smtp servers several times.

    There is only one main smtp server... not supplements

    I try to send an email whenever I get: user name and password smtp:mail06xxxxxxxx@authsmtp. Vodafone.nl is incorrect.

    vodafone is not my provider and I use the smtp server of vodafone.

    Anyone has an idea on how to address this problem?

    Have you tried to manually create the email account using the selection 'other '?

    What your email account provider?

  • could not connect to the smtp server

    Hi all

    I'm on a 21.5-inch iMac using OS 10.11.3 at the end of 2012. Yesterday (and today...) Mail would not send anything and gives me a status 'offline' for sending. I use Gmail IMAP with 2 accounts. The same problem happened to my wife on his computer with the shared e-mail account. My iPhone (4) will send the mail from the same account. If I log in to Gmail directly I can send emails. I deleted the account and re-written information. I quit Mail and restarted the computer. I looked at several solutions in the forums and have tried what appear to be common ones (that I could find), but nothing seems to work. After restart of the account Gmail sent me an email saying I had been blocked for using a "precarious" app, and I checked my Gmail settings so that I can use less secure (as the devil which means?) apps. The problem persists...

    Mail connection doctor says that it is connected to the internet and my 2 IMAP accounts work, but 2 SMTP accounts (I guess for the sending of?) say "not able to connect to this SMTP server.

    It all started yesterday without changing all the settings or preferences that I know.

    Any ideas?

    Michael

    Have you checked the SMTP settings for the latest recommendations googles? Changed something on their end recently?

    You run a 3rd party cleaning apps (clean my mac, mac guardian, etc.) or AN Anti Virus on your Mac? If so, remove them.

    have you installed anything between mail works and does not?

    If so, remove it.

  • SMTP server keeps rejecting me with error Ox800ccc0F

    I get an email, but can't send. SMTP.att.yahoo.com keeps rejecting me. Larry

    In describing the problems with a mail client, always say what's this e-mail client and also indicate your version of Windows.  You have posted in the forum Feedback, which is posting comments on the web site of Microsoft Amswers, does not ask questions by e-mail.  I moved your post on the forum 'Making in network and get online' Windows.  Please return to your message, click on modify just below, change the Version of Windows, menu drop-down to choose your version of Windows and add some text in the body of the message telling us what email client you use.  Then click on submit.

    The problem you describe is most often caused by failing to authenticate on the outgoing server.  In your e-mail client, view the properties of the account.  It should be a "Outgoing server" tab and in this tab should be a checkbox labeled something like "my outgoing (SMTP) server requires authentication."  This box must be checked for AT & T.

    In addition, AT & T now uses the names of different server than what you said, and that, too, could contribute, even though AT & T said that the old server names should continue its work.  I've seen other posts describing problems with the old server names changing current corrected names for the server.  See this: http://www.att.com/esupport/article.jsp?cv=803&sid=KB401570&title=What+are+my+email+server+settings+(i.e.%2C+POP+and+SMTP)%3F#fbid=ejHRxOCJlnr )

  • How to set up a backup to send emails with smtp server when Exchange is hosted

    How can I go on the definition of the Task Scheduler to send the paper with the smtp server, when our Exchange is hosted by Microsoft 365?

    Hi Jay,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Exchange Server on TechNet forum. Please post your question in the Forums TechNet in Exchange Server.

  • WebEx meeting Server 2.0 - setting up the smtp server

    Configuration of SMTP server for the Webex Server 2.0 meeting, the manual States:

    Possibly to enable authentication of mail server, select the server authentication enabled.

    If you enable authentication, enter credentials user name and password required for the system access to the e-mail server of the company.

    System emails are sent by admin @. Make sure that the mail server can recognize this user.

    -What exactly does "ensure that the mail server can recognize this user"?

    • I have to configure the admin @ account on the SMTP server? (customer can configure only e-mail as account [email protected] / * /)
    • Or admin @ is the property of «of» the mail and SMTP server should accept this property 'from'?

    -What happens if the user name and password are not specified?

    Thank you

    Here you have two options:

    (1) either use authentication: you must create a user account in exchange.

    (2) do not use authentication: let disabled authentication and configure exchange to relay emails from CWMS.

    "-What exactly does 'To ensure that the mail server can recognize this user'"?".

    "- What happens if the user name and password are not specified?"

    This means that if you enable authentication - create a user account for CWMS in Exchange. If this isn't the case, then have the exchange server that is configured to relay CWMS emails. Its simple allow only the ip address of CWMS in Exchange to accept and relay e-mail.

    If it does not means that you don't want to receive emails from CWMS and as you know email principal means of CWMS communicate with users.

    Simple way is to leave off authentication and configure the relay. I did this couple of times in the past without problems.

    -Terry

  • Enabling access to outside SMTP server

    I've seen a Cisco Pix 501 and use it to access the Internet. It is configured to use PPPoE and is linked to an ADSL line. It works very well, however I'm trying to configure it to allow access to my internal mail server. I read this previous post:

    https://supportforums.Cisco.com/thread/72060

    I followed all the instructions, but it still does not work. What I am doing wrong?

    Here is my configuration:

    6.3 (4) version PIX

    interface ethernet0 10baset

    interface ethernet1 100full

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate the password * encrypted

    passwd * encrypted

    somehost hostname

    domain abcd.ef

    clock timezone EDT 0

    clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00

    fixup protocol dns-maximum length 1500

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    no correction protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol tftp 69

    names of

    name 10.1.1.19 mailserver

    out2in tcp allowed access list any interface outside eq smtp

    pager lines 24

    debug logging in buffered memory

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside pppoe setroute

    IP address inside 10.1.1.2 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    history of PDM activate

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    public static tcp (indoor, outdoor) interface smtp server e-mail smtp netmask 255.255.255.255 0 0

    Access-group out2in in interface outside

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    AAA-server GANYMEDE + 3 max-failed-attempts

    AAA-server GANYMEDE + deadtime 10

    RADIUS Protocol RADIUS AAA server

    AAA-server RADIUS 3 max-failed-attempts

    AAA-RADIUS deadtime 10 Server

    AAA-server local LOCAL Protocol

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Telnet 10.1.1.17 255.255.255.255 inside

    Telnet timeout 5

    SSH 10.1.1.17 255.255.255.255 inside

    SSH timeout 5

    management-access inside

    Console timeout 0

    VPDN group PRMM request dialout pppoe

    VPDN group PRMM localname [email protected] / * /

    VPDN group PRMM ppp authentication pap

    VPDN username [email protected] / * / password * local store

    dhcpd dns 10.1.1.18 10.1.1.8

    dhcpd outside auto_config

    password to user auser name * encrypted privilege 2

    Terminal width 80

    Cryptochecksum: *.

    : end

    Here are the lines of interest:

    name 10.1.1.19 mailserver

    out2in tcp allowed access list any interface outside eq smtp

    public static tcp (indoor, outdoor) interface smtp server e-mail smtp netmask 255.255.255.255 0 0

    Access-group out2in in interface outside

    What I am doing wrong?

    TIA

    Daniel,

    How do you test the access to this server?

    For example, what happens if you Telnet from outside your public IP address on port 25? If you can telnet to port 25, then the PIX config is fine and you should start looking at the server config.

    Now if this does not work what do I you see if you're doing a "show xlate | Inc. 10.1.1.19.

    In addition, you can try to activate a capture and see if the packets are making it through the PIX:

    access-list 199 permit tcp any host 10.1.1.19 eq 25

    access-list 199 permit tcp host 10.1.1.19 eq 25 all

    capture the interface access-list 199 emailserver inside the length of the package-1300

    Then try again to establish the connection and check what capture:

    See capture emailserver

    Try it and tell us how it goes.

    Raga

  • Window popup message: the SMTP server requires a secure connection...

    Hi This is my first attempt to help in this way. my asset is not only the best please understen. About a week or two ago, I started to get a wjndow pop up on my desk which read "the smtp server requires a secure connection or the Chief client was not authenticated. the response from the server was 5.5.1 that required authentication. Learn more,". Microsoft won't say that Live Mail only on line help. If anyone can help, I would be greatfull. Tanks

    Hi Firedog, thanks for your effect. You're really nice. There was a misunderstanding from the very beginning because a technician of Optus suggested Live Mail. Here is a link to the screen shot of the message (thanks to a tip on how to do this). https://SkyDrive.live.com/redir?RESID=5EBCF026C069D223! 112 & authkey =! AEbfWyyrYKtIH3g by the way the problem has been resolved by a kind person in Switzerland with whom I am in regular correspondence. Here's what we did. I downloaded a track from "Trojan Remover" version, run it and it removed a Trojan horse embedded in a file named skillfully as one of the windows updates. Unfortunately the file has been deleted by Trojan Remover without register the full name. He was placed in users /my name /folder AppData. If the problem is solved but a big thank you to all who helped. I have a program of security installed on my PC, but it does not take this Infection, time to consider my safety. Greetings and thanks a lot again.

  • Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail

    I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails

    The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.

    Object "Marriot coverage."
    Server error: 550
    Server response: 550 must be authenticated.
    Server: 'auth.smtp.1and1.co.uk '.
    Windows Live Mail error ID: 0x800CCC79
    Protocol: SMTP
    Port: 587
    Secure (SSL): Yes

    Can someone help me please

    JO

    Original title: Email problems

    Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.

    WLMail open

    Right-click on the name of the email account

    Click 'properties '.

    Click the [servers].

    "my server requires authentication" is checked?

    If it is not try to delay it and and see what happens then.

    Note that you may need to click the [Settings] button to enter the necessary info he needed.

  • No SMTP server specified for intrusion via CFMAIL.

    Hello

    I am trying to run this tutorial and I get this error.

    No SMTP server specified for intrusion via CFMAIL.



    What should I do?

    The web site, you access has met an unexpected error.
    Please contact the site administrator.

    The following information is for the creation of Web sites for debugging purposes.

    Error occurred while processing request
    No SMTP server specified for intrusion via CFMAIL.
    In order to send SMTP messages, ColdFusion requires that a default SMTP server is specified. You can set the default SMTP server by using the page of the ColdFusion Administrator's e-mail. Alternatively, you can make sure that all tags intrusion via CFMAIL have a SERVER = attribute provided. In this case, no SERVER = attribute was provided and no default SMTP server setting has been specified.

    The error occurred in C:\CFusionMX7\wwwroot\CFIDE\cfmbible\ch31\1-cfmail-simple.cfm: line 3

    1: <! - email can never be sent if the email in the From attribute below is not changed to a valid value for your mail server - >
    4.
    3: intrusion via cfmail = "[email protected]" subject = "[email protected]" = "Thank you for having accepted" >
    2.
    5: Thank you very much for joining our service. We invite you to visit the other links on our site, including http://www.yourdomain.com/somedir/somepage.cfm



    --------------------------------------------------------------------------------

    Resources:
    See the ColdFusion documentation to verify that you are using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.


    Browser Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    Remote address 127.0.0.1
    Http://127.0.0.1:8500/CFIDE/cfmbible/ch31/sponsor
    Date/time 16 May 07 14:06

    After you connect to the CF administrator, click on mail. on the mail page, you will see an input box. If you have an address for a mail server, then enter. otherwise, type 127.0.0.1.

    Good luck
    Thim

Maybe you are looking for

  • my battery drain too quickly, can you check it?

    Hello first of all. I'm Bola, this is the first time for first time and customer support use apple and I respect a lot Sorry for my bad English, I'm from Egypt. I have iphone 6 64 GB iOS 9.3.2 9.3 battery was fine and end a day full now he spends 12

  • Google instant search

    When this http://www.google.com/insidesearch/instant-about.html Google Instant is used, Firefox ask me whether to download a file named search. One blocks download appears for each letter I get.

  • Need drivers after upgrading to Windows Vista Business on Satellite A100

    Hey I've upgraded to vista some time ago and my buttons of media and Fn keys no longer work. I don't know if there are drivers available, but if anyone knows where I can get would be great. The model number is PSAA8C-0FH00E

  • No more change option post?

    Hello. Is it me or is change it your own post option now missing? I know there was a time limit before it goes away, but I noticed, that it is not there just after that I have post. Thank you in advance.

  • Why my email does not work?

    Why my messenger is no workin