What is causing this problem of color on menus?

Similar Questions

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Some of my incoming emails go in my box to delete instead of my Inbox. What causes this problem?

  Some of my incoming emails go in my box to delete instead of my Inbox. What causes this problem?

  Additionally, make sure that your antivirus program does not scan your incoming mail.

• my Media Player shows no music, or rip music of the inserted disc. What can solve this problem

  my Media Player shows no music, or rip music of the inserted disc. What can solve this problem

  Hey Lucky,

  You can try the steps in the follwoign and check if it helps.

  Method 1:

  You can try to rebuild the media player library, and then try to extract again

  This problem can occur if the media library is corrupt. Rebuild the library and check if this solves the problem.

  Follow these steps:

  a. exit Windows Media Player.

  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

  c. Select all files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Method 2:

  You can also try to change rip settings and check.

  For more information, you can consult the following article:

  Change settings for ripping

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• game disc I'm color lines thick green red blue what could cause this?

  When I load a game disc or try to play deer animated screensaver I get thick lines of color!  I can play games online very well! How can I fix this or find out what it is?

  Hello Shirley,

  Welcome to the Microsoft community. According to the description, you get the colored lines when you load a game disc or try to play deer animated screensaver.

  ·         Did you do changes on the computer before the show?

  I'll help you with this problem. It might be because of display drivers. I suggest you to update the latest display drivers and check.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• free space on the hard disk of 80% to 10% from one day to the next. What could cause this

  My hard drive went from 80%, 10% free until the next day. What is the cause?

  Hello

  (1) what antivirus program do you use?

  (2) version of Windows do you use?

  (3) have you made no changes before this problem?   I suggest you try these methods and check.

  Method 1:

  Delete files using disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 3:

  Check a drive for errors.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• My computer keeps me tabbing off games, programs and taking me to the windows screen whenever I start something up, what would cause this?

  I recently built a computer, and it was working fine the first week I got it. Recently however, whenever I start a game or a program such as Netflix or even simply get on the internet it is like I hit alt + tab and takes me in my office. I thought it might be a virus or malware but when I scanned my computer it was a virus that can detect my software and I deleted all the malware that was found. When it does work, I asked a friend about it and he thought that the problem was the key to windows on my keyboard. I had been using, I unplugged the keyboard started a game and he seemed fine, but I put a new keyboard in there today and the problem has started again. I have no idea what could be causing this and I need to know if it's a simple solution or if I should consider a professional and ask them to look at?

  Hello

  What is happening with a particular game or all games?

  Restart and start typing the F8 key to display the logo of the manufacturer

  Select Mode safe mode with networking

  Download the following and run a full scan.  If your system has been compromised, the av software may not able to detect the virus/malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Reboot and let Windows load when finished

  You use Internet Explorer?

  Tools > manage add-ons

  Disable all add-ons

  Start the game to determine if she plays with disabled modules. If he plays accordingly, then re-enable modules one by one to determine which can cause the problem.  Remove/disable the add-on.

  Question: Have you checked the overheating problem when playing the game?

• All files docx on my computer suddenly changed to files in Notepad. What has caused this?

  My computer is running Vista.  All of a sudden all the files docx 2007 Windows on my computer have changed for notebook files.  What caused this and how to prevent this from happening in the future?

  Thank you for your help.

  Hello

  Find a .docx file, right-click on this file and then click Open with...

  In the window that result, select Word (by clicking it) and check the box "always use the selected program to open this type of file". Click OK.

  Tricky

• I don't even know what to call this problem with Windows 7! Can someone please read and help?

  Hi all

  What is c?

  I have half a dozen problems with Windows 7 right now, but let's start with the most irritating.  Screens disappear and reappear.

  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  And try to block and the copy is a nightmare of one window to the other.  Or even on the same page.  I try to block something and move away, and the "block" disappears.

  I thought it might be my mouse, which is your ordinary Microsoft Optical Mouse 2V.0, I went to devices and printers and formatted my mouse (I've never done this before) and my Microsoft Keyboard and recorded.  Nothing wrong with the keyboard.  The mouse just kept screwing as it did before, and I used your basic standard settings - nothing fancy or different.

  Now I write in this little place and nothing is to move, the mouse behaves - what IS IT?

  I am getting this problem in Windows 7 because honestly, I have no idea where else to put it.

  And I have just started with the problems.  Can you please, please, please help?

  I can't help but think that all the problems are related, so I'll put one little summary of what else is happening.

  1 out of nowhere part, I got a notice saying that I had to change the settings to allow Windows update immediately and without my permission (I think that's what he said and I know that there is a setting in devices and printers? or something like that where I allow edits without review)

  2. I can't convince my printer there is NO residential group and that I am the administrator and the only person using the computer.  This screw with my settings (wired) network too.

  3. I have a four-in-one printer (print, copy, scan and fax).  I am at home lately and will be years apparently, so I decided that I wanted to get the printer scanner and fax.  He was already printing and copying.  I turned off, unplugged and did not know that I had to uninstall all software and then reinstall it.  I don't have the time to do it again; I want a clean computer before you set up the printer.  Well, it seems to create small problems in the world.  I keep getting directed to devices and printers, but I want to read all the information before I uninstall just in case.

  4 modules!  They are the bane of my existence.  I do not understand what they are doing when I go and look at them individually. I tried to use IE10 without addons and it's just a big headache.

  5 constantly getting a yellow banner at the bottom of my screen asking me if I want to run * some * and I wanted to know the risks involved.

  6. constantly asked about Active X.  What is it and what does want of me?

  7. all of a sudden an hour ago, my computer has decided to go to "sleep" mode and wants me to change user for myself and when I do, it says it is locked, but I hit the beautiful image and it opens on the regular Windows screen.  WHY?  I don't use a screen saver and I got 20 minutes sleep mode which is just the entire dark screen until I touch the mouse.  No more!

  Guys do you see why I'm going crazy?  Help, please!  I spend all my days this last week and one before that trying to move things.  All this because I wanted my printer to scan.

  ···
  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  ···

  ^{Click Start or press the Windows key and type mouse but do not hit Enter. Search change how your mouse above control panel section.}

  ^{When this new pane opens, uncheck the Activate a window by hovering over it with the mouse. Click OK at the bottom to save your changes.}

• difference of repository is causing this problem?

  Hi all,

  We have the tool of Administration Oracle BI, Version 11.1.1.6.2 and 320 repository in our server, everything was ok, I tried to install the Administration tool in my laptop alsa, I installed and import a table then join him and when look at the dashboard report didn't work (it does not include the join column) then turn to info and see that I have installed the tool of Administration Oracle BI , Version 11.1.1.6.0.120104.1244.000 and repository 318.

  Is the difference of repository can be the cause of this problem

  Hello

  Yes, the difference of repository version will cause the error. The lower version down does not go to support the next version.in your 11.1.1.6.0.120104.1244.000 case can't upgrade 11.1.1.6.2.Please.

  Thank you

  Prasanna

• I moved the files in Lightroom 5 from one drive to another (created the new folder and dragged).  Now I see warning of metadata.  What has caused this?  Can I import or rewrite the difficulty catalogue?

  I am reorganizing lots of photos in Lightroom 5.  Some who were on my hard drive, I moved to an external drive.  I did all this in Lightroom.  I created a new folder on the hard drive, external, selected all the images in the folder on the hard disk, trained to the new folder.  Made sure they were there.  Then deleted the folder on the hard drive.  When I looked in Windows Explorer, the (empty) folder was still on the hard drive, so I deleted it there too.  Now, I get the warning on the images in the new folder metadata were changed in Lightroom and an external program.  The options are to import from disk or rewrite from the catalog.  I would like to know what caused this and how to fix it.

  Thanks for the clarification of Nancy.

  The warning of "metadata conflicts" is an indication that Lightroom "sees" a discrepancy between the data in its catalog and the data in the image file (or in the xmp file) on the real situation which could be due to permissions at the new location.

  You should choose the option to replace the parameters, that is, rewrite in the Lightroom Catalog can write changes to metadata of the catalog itself.

  (Import of the disc would cancel the metadata changes that you did until now)

• What is causing this pixelation/distortion when I zoom in my pictures?

  Does anyone else have this problem?  Crazy pixelation.  Makes it impossible to edit photos.  Please see attached photos.  I am a new user to the CS6.  The only change in my workflow is that I pre-process photos in Capture1, but I don't think that's the problem.  I am running on a brand new MBP 2.6 / 16 gb non-retine with mountain lion.

  

  What the previous window to export resembles Capture1's you will see the picture seems normal, and the settings are standard:

  

  And the answer is! Reset the Photoshop preferences by restarting with cmd-opt-shift key on a mac.

• "Cannot connect to 201.86.73.83 remote connection! (what could cause this popup? where to check?)

  I tried to ask as to make following the question to someone else, but no response; try as a new query.

  DSL, router Linksys (tomato), a Windows 7 computer, put in place last November for the new project of a member of the family.

  The person who has implemented it access distance.  Here, it is used for Word and Excel, no music or video online.

  I came yesterday morning and found a popup in the lower corner toolbar on the right that says:

  "Cannot connect to 201.86.73.83 remote connection!

  (the IP is in the Brazil, I've never heard of him, found nothing more on this subject).

  The person who set up the machine has a long experience of Windows, changed some settings on the router and says "there is no evidence of the intrusion, so don't worry.

  But I know in general that "the absence of evidence is not evidence of absence" - so I'm still a little worried and if I see that again once I know what it means or where to look.

  Is there a log file where I could search by application (which one?) no matter what happened in the hours before, I noticed that popup?

  I do not know what newspapers is relevant if I can get to the lists and create a custom, view if I knew what to check.

  I don't know how long the popup is also present on the screen, the machine had been on it during the night and as soon as I took a screenshot of popup is gone.   It would be over an 8 hour period I want to check out.

  Hello, Hank

  With the information given, it is impossible for us to determine what came from this message. If it just happened one time, it may be safe to ignore.

  To be sure, it is not malware or a trojan virus, you can do a full security sweep.

• I click on the botton of start and type msconfig and the area off I click Service and discovered that 80 Microsoft has been stop mark what's causing this and how can I solve the problem

  I click on start and type in msconfig research and a box has opened and then I click on the Service and 80 this was mark stop. They all register of microsoft corporation. I believe this, why I had some problem with my computer.

  Hello

  There may be no problem that many Services start and stop on request so everything can be normal.

  Start - type in the search box-> control of the superior and right click on - RUN AS ADMIN.

  Or Control Panel - Administrative Tools - Control Services.

  To check the default settings for Windows Services:

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">