Similar Questions

• How and what is the keyboard shortcut for layer duplicated in a new tab? Thank you!

  How and what is the keyboard shortcut for layer duplicated in a new tab? Thank you!

  As an alternative to the suggestion of Chuck:

  Layer > duplicate layer. Document: new. Name the new file.

• HP Laserjet Pro 400 m451dn: How can I find a schematic or diagram for my share of m451 HP RM1-8604-000CN?

  Hello

  I have a HP Laserjet Pro 400 m451dn.  I need to replace the whole of the manual feed tray, which I think is part of the whole of the front panel.

  My printer is still under warranty, but I am doing this on my own ("self-help").  I don't want to pay $50 for shipping, and given that the main tray on the bottom still works I use it every day.

  I believe that the façade is RM1-8604-000CN, and I want to assure you that it is the right part before buy you.  Simple, right?

  HP website says I can do this.  However, when I followed the steps, this is what happens:

  (1) I have search for the part:
  

  (2) I click on the link "List of all parts of this product" and find a link for an Assembly of the front panel in the list. I click on it, which brings me to the next page, which has the part number and price:
  

  (3) because I want to make sure I got the right part, I click on the part number (RM1-8064-000CN) and the link brings me to the next page:
  

  (4) the page says I can "choose a product name to view a diagram with your game."   (that's what I want!)  I click on my product link (m451dn) and it brings me to the next page:
  

  (5) it is said to "Select a model number."  My specific model for my m451dn number is "CD957A" so I click on it, and it brings back me to the same page that I started with in step 1).  Arghhh!

  I've lost nearly two hours trying to find the diagram which says that HP is on these pages, and I'm starting to think that HP gives me just the evasive.  They claim to provide "Self-help" resources that do not really exist because they do not want users to help themselves at all.

  I don't want to deal with technical assistance to offshore.  I want to just identify the right part, have delivered to me and install it myself.

  Can someone tell me where I can find a diagram of this part?

  Thank you!

  Jim

  If you bring the printer to a certified support provider who will do the repair it should cost nothing.  Keep in mind that you have to find a provider willing to work on this printer and replace the part because there is a lot of work.  Here is a link to the service manual.

  http://www.lbrty.com/tech/Manuals_HP/M351_M451sm.PDF

• Your old cartridges work with your new printer?

  Your old cartridges work with your new printer?   I get this question asked a lot.  HP has a Web site that aims to answer this question.  Hp ink cartridges and Laser printing compatibility Guide allow you to enter your printer model number or the number of ink cartridge, and it tells you what is compatible.

  Try it here.

  Hope this information helps.

• What is the best workflow for longer projects with music?

  Hello. I'm just getting into after effects and WOW, I soak every tutorial I can. That being said, I wonder what's the best practice for working with longer projects. Let me give you a scenario.

  So, I have my HAND COMP with piece of music in 3 minutes I sync up to my animations.

  I create ANIMATION COMP 1 and drop it in the HAND COMP.

  So let's say that I want to adjust something in ANIMATION COMP 1.

  I switch back to ANIMATION COMP 1 window to make my adjustments.

  Problem: Bed of music is in comp 1 so I can't listen to music and make adjustments accordingly.

  The obvious solution is to simply create everything on 1 composition. But is there a way to make the MAIN COMP room if you change a secondary layout?

  Thank you

  The only sensible thing to do for a few minutes longer project to edit in Premiere Pro and make the moves you must treat as individual comps in After Effects. Comps are for the creation of pictures and short clips. Try to put 80 or 100 cups in a single cimp is not only difficult to treat, but finding the flow with the music of changes are almost impossible.

  If you want to get a real specific on all your production must begin before a single frame is shot. Shot a bunch of stuff and try to build something later are a very very bad idea unless there is no other choice. I did a lot of musical projects him more than 45 years in the business and even if you can't draw, just block storyboards will save you a lot of time.

  I hope this helps. If you remember that make you plans in an EA and you had it first and you mix sound in addition, you will be in good shape.

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

  I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

  Both the scanner and the printer work perfectly in all other situations.

  Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

  I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

  So why the red and blue are exchanged on the printer?

  Teknishun

  What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• What is the life expectancy of the battery in the pen of Apple? Can it be replaced or do I need to buy another pen?

  What is the life expectancy of the Apple pencil? The battery can be replaced or do I need to buy a new stylus?

  According to iFixit (of https://www.ifixit.com/Teardown/Apple+Pencil+Teardown/52955 )

  • The pencil is clearly not intended to be opened or repaired; You can't get inside without destroying the device.
  • The layers of plastic and metal holding the interior components are impossible to remove without grinding.
  • The battery enough for a 12 hour race, is impossible to replace, which gives the device a limited life expectancy.

• What is the maximum memory for this computer what kind

  I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  Maximum RAM

  2 GB

  http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

  Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

  Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

  You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

  UTC/GMT is 20:35 on Saturday, May 26, 2012

• What is the best processor for my Vostro 1510?

  Hello!

  I want to upgrade the processor of my Vostro 1510, willing now to an Intel Core 2 Duo T5670 (1.8 GHz). I would like to know what is the best processor for this laptop, can you tell me? (I don't know the exact model of motherboard)

  In addition, the laptop has 3 GB of RAM, I would like to know if it supports 4 GB of RAM with another CPU? and if it's possible to upgrade to Windows 7 64-bit (Windows 7 32 bit)

  Thank you very much!

  Hi Michelleacc

  Please write to us.

  Following processors are compatible.

  T5870, 2.0, 2 MB, 800 MHz

  T7250, 2.0, 2 MB, 800 MHz

  T8300, 2.4, 3 MB, 800 MHz

  T9300, 2.5, 6 MB 800 MHz

  T9500 2.6, 6 MB 800 MHz

  T8100, 2.1, 3 MB, 800 MHz

  in regards to memory, you can go to a maximum of 4 GB only.

  The machine come with windows 7 factory?

  We provide system tag #, e-mail address and your name via private message, by clicking on my name in blue and then select send a private message

  Concerning

• What is the correct order of network provider

  original title: network provider order

  What is the correct order for network providers.

  my choices are:

  a. provide Dell Wireless WLAN Card Logon

  Server Desktop Session host remote M/Soft b.

   c. Web Client Network and

  d. M/Soft Windows network...

  Hello

  The order of network providers can be changed according to the requirement. I suggest you to see the following link on the change of the network adapters.

  Modify the protocol bindings and the network provider order
  http://TechNet.Microsoft.com/en-us/library/cc732472 (v = ws.10) .aspx

• What is the best way for foglight consume a webservice

  I hope that this is has not been replied that a bazillion times and if it is please send me the link I'm open to that.  What is the best way for foglight consume a Web service and respond with an alarm if the response from the Web service is not what is expexted.

  for example, calls Foglight webservice to acme.com/areuup and he responds with correct status in json format process.  If it does agree return, then foglight must send alerts to correct individuals.

  Thank you

  Kaleb

  in the end, we have used a perl script to capture the webservice and treat it and tables configuration.  Here is what has been written and created an agent custom.

  I apologize to all those who find the bulky comments, but it's my edition of journal of the script. I removed the comments once the script has been published and used.

  ===

  #! / usr/bin/perl

  #############################################################

  # Author: Kaleb J. Albee

  # Depandancies: SOA webservice

  # Engineers: Marc and Manu

  # Date: 28/02/2013 perl: (v5.14.2) built for x86_64-linux-gnu-thread-multi

  # Operating system: Linux 3.2.0 - 29-generic eam-ops-test #46 - Ubuntu SMP Wed Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  #############################################################

  use strict;

  use warnings;

  use Try::Tiny;

  use SOAP::Lite;

  use SOAP::WSDL;

  Use Time::Local;

  My = @soaenvs ('BSE - dev', 'BSE test', 'BSE-scene', 'BSE');

  # parameters: $_ [0] receives a call of SOAP client object.

  #

  void toStr {return $_ [0] == 1?} 'up': 'down' ;}

  void getBusResults {}

  # $_ [0] will be the $client spent

  # create a different buses SOAP connection.

  my $result = $_ [0]-> (getMessagingEngineHealth)

  # arg0 is used to set the setting for what is expected on the soa web service.

  SOAP::Data-> name (arg0 => $_ [1]));

  # $_ [1] will be the bus happened in

  return (Lk ($result) "started" eq? 1: 0);

  #return $result;

  }

  # Start sampling.

  My $curTimeStamp = "";

  my $count = 0;

  Print "LdsEsbBusHealth5\nSTART_SAMPLE_PERIOD\n TABLE";

  foreach my {$soae (@soaenvs)

  my $client is SOAP::Lite-> service ("put the url of the webservice here.");.

  $count ++;

  # create an object to inspect objects. My $insp = Data new::Inspect->; Download the time stamp for this.

  my ($sec, $min, $hr, $day, $mon, $year) = localtime;

  # format the year correctly for useage.

  My $curyear = 1900 + $year;

  # the hand to the fglam agent fields at the tables.

  My $soacei = getBusResults ($client, "messaging.000 - CEI.esb.BUS");

  My $soaapp = getBusResults ($client, "messaging.000 - SCA.APPLICATION.esb.Bus");

  My $soasys = getBusResults ($client, "messaging.000 - SCA.SYSTEM.esb.Bus");

  $curTimeStamp = ' $curyear$ MON$ day$ hr$ min$ s ";

  Print "SoaEnv.String.id=$soae\n";

  Print "CeiBusNum = $soacei\n";

  Print "AppBusNum = $soaapp\n";

  Print "SysBusNum = $soasys\n";

  Print "CeiBusStr.StringObservation.obs =". toStr ($soacei). "\n";

  Print "AppBusStr.StringObservation.obs =". toStr ($soaapp). "\n";

  Print "SysBusStr.StringObservation.obs =". toStr ($soasys). "\n";

  Print "Daterun.StringObservation.obs=$curTimeStamp\n";

  If ($count<=>

  Print ("NEXT_SAMPLE\n");

  }

  } {$soae foreach (@soaenvs) #.

  Print "END_TABLE\n";

  Exit 0;

  ===

  I hope this helps someone out there!

  Bravo!

• What is the life expectancy of the Support of Oracle E-Business Suite extended-release

  What is the life expectancy of the Support in Oracle E-Business Suite 11.5.10 extended release.
  
  Up to what time it is supported.
  
  
  Kind regards.

  Y at - it all any date deadline for this support extended?

  According to the pdf document that is referenced in the links above, it is "Nov" 2013.

  Life Support policy Oracle - Oracle Applications
  http://www.Oracle.com/us/support/library/lifetime-support-applications-069216.PDF

  Thank you
  Hussein

• What is the best OS for a late 2008?

  What is the best OS for a late 2008?

  El Capitan.  He will run the latest apps and have the latest safety features.

  Do not install the maximum RAM that your model will accept (best sources RAM compatible Macs are OWC and Crucial).  If the bank account is fat, install an SSD (Crucial and OWC SSD are recommended).

  Ciao.