What is the interface transfer rate ata in hp Pavilion g4-1117dx

Similar Questions

• museums of 15N: what is the maximum ram I can put in Pavilion 15N with processor AMD RADEON

  What is the maximum ram I can put in Pavilion 15N with processor AMD RADEON?

  Hello.

  The capacity is 16 GB maximum supported RAM in this model, you can go ahead and update if you want to.

  In addition, you can take a look at the technical details of your laptop and follow the steps to change the RAM:

  http://h10032.www1.HP.com/CTG/manual/c04402649.PDF

  I hope this helps.

  See you soon!

• What is the interface for a HDD Satellite Pro L20?

  I want to upgrade the hard disk of 40 GB in my Satellite Pro L20 to a larger drive. The manual does not say what type of interface, it is. Any hard disk of standard internal SATA 2.5 "x 1/8 H will be adapted?

  Hello

  You will need the height of 2.5 9.5 mm IDE HDD 40 GB, 60 GB, 80 GB or 100GB.

  As you can see the IDE and not SATA HDD is necessary!

  Good bye

• Limit the audio via the acquisition of data, what is the analog output rate of the pci-6014?

  Hello

  I'm trying out audio buffers thanks to an acquisition of data pci-6014. Audio files normally have a sampling rate of 44.1 kHz, but I noticed that when I try to exit, at this rate, that I get an overflow error. I checked the datasheet and it shows a rate of output of 10 K samples per second, way too slow!

  This device 6014 is quite expensive but are still unable to a stereo sound output signal... ? Is there a way to bypass this limit? It is not sensible to pay $1000 one another.

  See you soon.

  I don't think there is a way to increase the analogue of rates. The 6014 is old enough. A better card and cheaper, would be the 6221.

• What is the interface variable in a method of eating EJB initiated?

  Hello
  
  the bellows of code is part of a simple example of EE 6 of the book of Yuri Vasilievs focused on the database from the beginning...
  
  Can somone tell me when the bellows of the customerSession variable will be initiated in the bellows of class CustomerSessionClient.
  
  When I run theCustomerSessionClient (main method) in my environment of netbeans, the customerSession is always null?
  
  Below first class of the interface, then the CustomerSessionClient class
  
  
  
  package ejbjpa.client;
  
  
  Import javax.ejb.Remote;
  
  /**
  *
  * @author xxx
  */
  @Remote
  public interface {CustomerSession}
  public String getCustomerAddress (Integer customer_no);
  
  }
  
  
  
  
  
  
  
  Import ejbjpa.ejb.CustomerSession;
  Import javax.ejb.EJB;
  
  /**
  *
  * @author xxx
  */
  public class CustomerSessionClient {}
  @EJB
  Private Shared CustomerSession customerSession;
  
  Public Shared Sub main (String [] args) {}
  
  System.out.println ("billing address of the customer whose id is:" + customerSession.getCustomerAddress (1));
  
  }
  
  BRG
  
  Javanalle
  
  Published by: 873848 on July 20, 2011 20:56

  Can somone tell me when the variable customerSession below will be initiated in the CustomerSessionClient class below.

  It will never be initialized.

  When I run theCustomerSessionClient (main method) in my netbeans environment customerSession is always null?

  I agree.

  It is just a command line client. It does not execute in an EJB container, so the @EJB annotation never takes effect.

• What is the maximum bit rate under 5 GHz N-mode for EA6900?

  I just bought an EA6900 and been happy with it so far. As we know, its wireless connection rate is the 600Mbps under 2.4 GHz mode N or 1300Mbps AC 5 GHz mode. My question is, what is "up to" N-mode speed to 5 GHz? What also 600Mbps? I couldn't find the answer after hours of searching on Google. I am not able to reach the ceiling with my devices, but I would like to know more details about my equipment. Thank you.

  The devices can reach up to 450 Mbps regardless of network Mode. But standard-wise, 802.11n clients normally has a live speed of 54 Mbps to 300 Mbps w / maximum distance of 300 m or 1000 ft. For reference, you can check this link.

• What is the best bit rate to use for files WMV to DVD?

  I shoot with a low point and shoot digital camera.  I take the files AVI-video from the camera, which are quite large, and edit them in Windows Live Movie Maker 2011 and then save them as WMV files that are typically much smaller.  I like to create DVDs with better videos using Windows DVD creation or another program video.  My question is what bit rate to specify when I publish the films completed as WMV files?

  My camera AVI files can be played in Windows Media Player.  They have little of rates which vary from about 3 Mbit/s to a little more than 5 Mbps.  Is STANDARD DEFINITION 640 x 480 VGA quality video.

  Movie Maker default bitrate for the option "burn to DVD" is 2.99 MB/s.  I do not notice a difference in quality between the 2 MB/s I usually use and.  (I chose 2 Mbps, because in the past, I've used Windows Media Encoder and it defines "DVD quality" like 1-2 Mbps transmission speed and quality "HD" as 5 Mbps.)  Bit rates below 1 Mbps up to 500 Kbps have been defined as "Quality VHS" and below which has been 'QVGA quality'.

  With important videos, I publish movies with a flow rate of 5 Mbps.  Default speed of movie Maker for videos "to be played on my computer" is 7.69 Mbps, but it's more than the AVI from the camera, then how is this possible?  How can save the file with a bit rate higher than the bit rate of the input file?

  Is another experiment, a good way to decide on the rate of good bit for my projects?

  Hello

  Thanks for joining us out on Microsoft Community Forums. I understand that you want to know the best bitrate for video files Windows media burn on DVD.

  I suggest you check out the link to check the bit rate and resolution.

  The movie settings: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-Vista/movie-settings-frequently-asked-questions

  Refer to this video file formats can I choose to publish my movie in windows movie maker? The link above.

  If you face problems more while working with Windows Mail on Microsoft Community Forums, we will be happy to help you.

  Thank you.

• What is the interface on my Alienware Laptop, M17xR3?

  I want to buy and install Crucial MX200 SSD m2.

  And I found 1 port resembles m2 located under the keyboard near the ram slots.

  Please help me identify this crack in the picture.

  There 'Jetty' sign.

  

  

  Hi, Sehri, the laptop in this photo looks like a M17xR3 or M17xR4.

  If so the slot if you watch is a feature that allows for WiDi - to your to transmit Wireless HD video from your laptop to a monitor active WiDi or a TV.

  I found a glaring issue in the official Dell Alienware owners manual for M17xR4 model, there is no mention of a player mSATA or housing unit, which is a little funny that I sold at least 100 units of this model, all with cache mSATA startup disks

  You do not have a location for a disc mSATA hard, BUT ONLY in THE MODEL of M17xR4, that is there is positioned under the palmrest to halfway between the bottom of the keyboard and front speaker/light grill, the LCD screen and the palm rest must be removed for access to the installation.

  M2 technology was not around when the M17xR4 was not so sure, weather, you will get a standard mSATA performance gain to M.2 mSATA, just be sure to get one that has the correct interface issues pins

  M.2 mSATA (unsuitable) - http://www.ebay.com.au/itm/Samsung-850-EVO-250GB-M-2-Solid-State-Drive-/111647286503?pt=LH_DefaultDomain_77&hash=item19feb264e7

  M.2 mSATA (adapted) - http://www.ebay.com.au/itm/SSD-256GB-Plextor-M-2-SATA-2280-PX-256M6G-retail-SSD-PX-256M6G-2280-/121679676606?pt=LH_DefaultDomain_101&hash=item1c54ac84be

  This also applies to the Alienware

• What is the maximum amount of memory in a Pavilion P6020 - Win8 upgrade?

  I can't find what the maximum amount of memory can be placed in the Pavilion P6020.

  As it is necessary to do a re-install of the operating system supplied with the system (Vista), I would check if it makes sense to improve the Win8-64 bit system and increase memory to 3 GB to 4 or even better of 6 GB.

  Currently, the system has 3 GB of memory (1x1GB & 1x2GB), the way in which he indulged.

  This configuration really makes the relative system slow lately.

  Peter

  Hi, Peter:

  There are several variations of the P6020.

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us & DLC = in & LC = on & os = 228 & sw_lang = & Tool = & query = P6020

  I think they all have the same specifications which indicate the maximum memory you can install in the PC is 2 x 2 GB memory (4 GB).

  Before you "sign on the dotted line," to buy Windows 8, go ahead and start the download and it will first run an Upgrade Advisor to check your PC and report incompatibilities.

  Your PC is more than likely won't be supported by HP with windows 8 drivers. My main concern would be the video card, do not have drivers available.

  Paul

• What is the difference between HP Envy and HP Pavilion?

  Which is better and why?

  Hello

  Feel like machines are much bettr built and care generally superior to her ===> higher prices. A lot of people asking the same question such as:

  http://Forum.NotebookReview.com/threads/envy-vs-Pavillion.669607/

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/help-with-the-difference-between-the-envy-and-Pavilion/TD-p/2289959

  they are also designed to compete with other lines to other providers. Please read more information:

  http://en.Wikipedia.org/wiki/HP_Pavilion_%28computer%29

  http://en.Wikipedia.org/wiki/HP_Envy

  Kind regards.

• transfer rate what is data from disk

  When I check my note to my computer, I notice that disk data transfer rate is the smallest number. Could someone tell me what this means and how I improve it. Thank you

  Hi June,

  Without making too detailed, its basically the speed at which your hard drive ("disc") reads and writes ("transfer") data bits ("rate") between different parts of the hard drive and the central memory.

  Short of a change of equipment, that is, change or replace the classic hard drive (HDD) by a unit of the solid state (SSD), nothing much you can do. Its totally a hardware related issue, and there is nothing software can do the actual transfer rate; It's a built-in to every reader of all limit which the (physical) hard drive controller is capable of doing.

  Let me know if this helps you.

  Kind regards

  BearPup

• Poor transfer rate using Converter standalone 5.0 compared to the 4.3

  I recently started using the Converter new version 5.0.0.  I did successfully more than 30 years of P2V Windows 2003 systems using version 4.3.  Immediately, I noticed two problems:

  (1) the average transfer rate went from about 100 MB/s to between 0.8 and 2 MB/s.

  (2) the process has systematically failed after completion of the c: cloning and start on the D: drive.

  I tried this on 5 different physical servers, ranging from 5 different servers host VMware ESXi 4.1 and the result was always the same.  I assumed it was a network problem or firewall and sent on a 'wild goose chase' network team for 2 days.  After that they were convinced that the physical machine being P2V was simply not sent sufficient packages, I went back and re-installed version 4.3 and restarted the P2V transfer.  This time, I received a transfer rate average of 100 Mbps (50 x faster) and the whole process completed successfully.

  Has anyone else seen a similar problem?  No possible explanation?

  The file you have to change is converter - Worker.Xml. It should be located under folder "%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone". You should find the useSsl under the nfc subkey value in Config key. If not present, you can add this value as follows:

  ...

  fake

  ...

  ...

  Save the configuration file and restart the worker VMware vCenter Converter Standalone service.

• ThinkPad E420 - what is the type of this laptop SATA interface? Is this 2 SATA or SATA 3?

  Dear all,

  What is the type of interface SATA of ThinkPad E420? Is this 3 SATA or SATA 2?

  I noticed that this laptop hard drive transfer rate is 3 Gb/s, which means that it is a SATA 2 HARD drive, isn't it? It also means that the laptop SATA interface is SATA 2?

  I tried searching the support site and product from lenovo for this information, but I can't.

  Thanks in advance.

  Best regards

  Haris

  You're right, the E420 is SATA2.

  SATA3 is very rare in the laptops!

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• can I call from sri lanka to the US and what are the rates

  I take my computer with me so I can call usa Sri lanka and what are the rates

  Beachbum wrote:

  I take my computer with me so I can call usa Sri lanka and what are the rates

  With Skype, your location is unimportant. Calls to (or within) the United States wherever you are cost 2.3 cents / minute or part of it.

  You can easily find the information yourself with a little research here:

  http://www.Skype.com/intl/en-us/prices/PAYG-rates/

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.