What is the range of values of type of data accepted by prepareBulk file?

Similar Questions

• Need to convert the Varchar2 column number for the extraction of data based on the range of values.

  Hello

  I have a ZIP column which is the Varchar2 data type, it has values such as 2345, 09485, 10900, 07110, 06534.

  I have to go look up records from the range of values for the ZIP column as between 00000 and 07500.

  Could you give a logic.

  Thank you.

  Hello

  I think you can use the following code:

  SELECT T.*

  OF t

  WHERE the to_number (ZIP) between TO_NUMBER('0000') and TO_NUMBER('07500')

  ;

  CGomes

• What is the difference between manual (startup type) and started (status)

  What is the difference between manual (startup type) and started (status)

  If I set the automatic startup type and the State stopped, what will happen?

  It starts automatically at startup, but will not start?

  Hi zkteh,

  Please see article with some information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  I hope this helps!

• What is the best product from Adobe that allows me to merge PDF files?

  What is the best product from Adobe that allows me to merge PDF files?

  Hi eponcedeleon,

  If you are looking to merge PDF files, then the cheapest way to do this is with a Pack PDF subscription. For more information, see surely create a PDF file, convert PDF files, & merge PDF files online | Adobe PDF Pack.

  Not only will you be able to merge PDF files, but you can create or convert your PDF files in various formats, including Word and Excel.

  Please let us know if you have any other questions.

  Best,

  Sara

• What is the HTML code I need Adobe Flash to play a video file embedded in MP4 (8 MB)?

  What is the HTML code I need Adobe Flash to play a video file embedded in MP4 (8 MB)?

  Thank you

  Mark

  Here are a few ways, one using the Netstream class using the FLVPlayback component.

  The NetStream approach, what follows in the timeline code will play/loop for the planned mp4 file...

  var video: Video;

  var connect_nc:NetConnection = new NetConnection();
  connect_nc. Connect (null);

  var stream_ns:NetStream = new NetStream (connect_nc);

  stream_ns.client = this;

  function netStatusHandler(p_evt:NetStatusEvent):void {}
  If (p_evt.info.code == "NetStream.Play.Stop") {}
  stream_ns. Seek (0); for the video loop
  }
  }

  stream_ns.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);

  video = new Video();
  addChild (video);

  video.attachNetStream (stream_ns);

  stream_ns. Play("path_to/Your.MP4");

  For the FLVPlayback component, add it to the stage, give it an instance name ("public service" used below), assign your file mp4 ("path_to/your.mp4") as the source property in the properties panel and select the option autoplay as well.  Place the following code in the timeline...

  fp.addEventListener (Event.COMPLETE, playAgain);

  function playAgain(evt:Event):void {}
  FP. Play();
  }

  To put the Flash file swf in a html page, in the settings of publication set to publish a swf and an html page.  Publish the file one the html page will be created for you.

• How to set an expression by the range of values & run function value entered

  I'm looking for help with an IF statement that focuses on value ranges and executes a sum based on what it finds.
  I use LC D 8, the script runs on FormCalc - Client-side - calculate events. Numericfield1 is a value entered by the user.

  I currently have (which does not work):

  If (numericfield1 > = 1000 < = 4999) then / / I want to check is the power of users lies between these figures

  numericfield1 * 5 / 1000 / / if I want to run this sum only

  else if (numericfield1 > = 5000 < = 9999) then

  numericfield1 * 10 / 1000

  else if (numericfield1 > = 10000 < = 19999) then

  numericfield * 20 / 1000

  endif

  So if I get 2500 in numericfield1 the sum would be: 2500 * 5 / 1000 = 12.5

  I want to keep these ranges of values in these games: 1000 to 4999 | 5000 to 9999 | 10000 to 19999. 20000 to 49999. 50000 to 250000.

  (here also to enforce that 1000 is the lowest possible entry)

  The above work when numericfield1 is anything below 4999, but anything after that he continues to * by 5 then / 1000. Where there should * 10 / per 1000.

  Hope someone can push my thinking in the right direction, thanks in advance.

  You need an "and" in your statement:

  If (numericfield1 > = 1000 and numericfield1)<= 4999)="">

• validate the range of values

  Hey!

  I would like to make a simple script, validate a range of values between 500-1500 and if the value is outside of the range, is marked with red.

  Anyone who could help?

  Thanks in advance!

  Use this code:

  event.target.textColor = (event.value > = 500 & event.value)<=1500) color.black="" :="">

• What defines the reference name in a type library

  I've created a DLL in CVI 9.1 for use with VB6.  I used a function (.fp) workgroup file to define the functions exported from the DLL.

  We add the DLL as a reference to the VB6 project, which allows functions defined in the .fp to be used directly from VB6 without using info prototype of any kind.

  One problem with this regime removes a reference from Visual Basic 6 development environment - there is no obvious way to do it - there is no possibility to "remove the reference.  We invariably liquidation brute force tearing all this reference to the DLL in the registry and remove the DLL itself the facility so that VB6 keep find it and insisting on using it.

  One aspect is the name of the reference.  What estblishes the name of the reference to the VB6 development environment?  What is the name of the DLL?  It is the name of the .fp file?

  I could run an experience I guess, but maybe someone knows and can tell me.

  Thank you.

  Menchar

  Menchar-

  It turns out that the name of the file function group (.fp) establishes the name of the reference when the DLL is added to the Visual Basic 6 development environment.

  The developer can see the associated DLL name, but the reference itself is the name of the group file function that may or may not be the same name as the DLL, the project, space to work or anything else.

  Thanks for the help, Menchar, you're always on the ball.

  Menchar

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• Desperate: What is the speed of a simultaneous acquisition of data NO? (PCI-MIO-16-1 (6070E))

  I am struggling to understand how fast, I should be able to run my PCI-MIO-16-1 (6070E). The card is valued at 1.25MS / s. I understood that run several channels divided it. I'm perfectly fine with that. Specifically, I need 2 channels clocked at 625KHz, each, this card should be perfect. However, in practice (using MAX or SignalExpress), can't the card to run faster than about half that speed. In other words, I can take 2 channels at 315KHz. If I go on that, I get a 'strange' behavior, including a machine so overloaded and lazy that I have a hard time to kill the process. If I go directly to the maximum speed, I just get an error about the ADC does not complete on time.

  I've been more present here: http://forums.ni.com/ni/board/message?board.id=250&thread.id=52447, but I had marked this thread as resolved. Indeed, this Council has me full speed running on a single channel, and it's a thing of beauty. However, I hit a different limit, so I'm trying a new thread.

  This seems to be a very simple question: what should be the theoretical maximum speed be on this map, once I have start trying to take more than one channel? Am I restricted to less than a total of 1.25MS / s due to the action of switching of the CDA that she questions the channels? I can't get 1.25MS / s single channel? I'd be able to do 2 625KS/s channels, or that I'm wasting time because the card does not have a simultaneous sampling? If I can't spin the full flow I think I should get, I must have a different card and move. I don't know if I'm wrong, or hit a hardware limitation that I don't know.

  Thanks for reading!

  DK

  
  

• What is the unit of allocation best partition optimized for games and other files?

  Original title: Dear lads! I'm buying a Western Digital Caviar Black 500 GB, and I intend to optimize my HARD drive

  I want to tell you, what I usually use my PC, so you can help me with the allocation units, partitions and the locations of the page file.

  -Use computer games for most of my quality time. I wonder, what is the unit of allocation best partition optimized for games
  -I download and download a large number of files. I'll create a separate partition for this kind of data?
  -I'll have access to 2 different hard disks the following day. Will I dedicate entire storage for the pagefile? (I've got GB of physical RAM)
  Thank you in advance for your time and suggestions!

  «Also, I would like to know, if I needed a file at all, or I could skip just use it, because I read something like: pagefile is mainly used for memory images, which I don't really need (some have suggested, you don't even need it on servers).»

  When you move the pagefile to another PHYSICAL disk, you should always leave a little on C, perhaps 500 MB, for things like memory dump files. Next, you define a "system managed" pagefile on the other disk.

  It never makes sense to totally eliminate the swap file and don't forget that the swap file is not a Microsoft invention designed to shoot to the top of the hard drive space. OS UNIX, Linux and Mac too, independently use the totals of RAM...

• What is the best option for merge prel seven projects - using an intermediate file. using Premiere Pro or a Clipboard Extender?

  I did no editing for a few years and suddenly received (for me), a difficult task. I have now just finished editing a wedding shot with 4 video cameras (I took a few videos and other formats have been those who shot at random), in the first 14 elements. The formats of the clips are also different. Due to the fact that there was overlap so many scenes and the complexity of the task, I have divided marriage in 7 scenes, each is a file/project prel e.g. married dress, ceremony, etc. I didn't know at that time that it might be difficult to merge the projects. The final step is to merge these files so that I can make both BD and DVD.

  I initially purchased Premiere Pro for editing, using Pinnacle for years, but I was struggling too much with the Pro and the different formats of the clips, add music, overlapping, etc. Then I bought elements and was very uncomfortable with the Expert mode. I think that I am now ready to start using Pro.

  The specs of my computer are:

  OS: Windows Pro 64-bit 10. current version: 10.0.10586.306

  gigahertz Intel Core i5-2400 3,10; RAM: 8, 00 GB Dual-Channel DDR3. 64 bit

  First Elements 14.0.64 Version
  First Pro CC 2015 Version 9.0.0

  Here are a few clips (from MediaInfo) specifications (some of them might have been converted as they were given only to me some time after the wedding):

  1. Codec: AVC; Variable bit rate; Bit rate 16.4 Mbps; 1920 x 1080i. Frame rate: 25 fps; Sound: AC - 3; Bitrate: 256 Kbps
  2. Codec: H.263; Constant bit rate; Bit rate 36.6 Mbps; 1920 x 1080; Frame rate: 25 fps; Sound: AAC; Flow rate: 192 Kbps
  3. Codec: AVC; Variable bit rate; Bit rate: 24 Mbps; 1920 x 1080i. Frame rate: 25 fps; Sound: AAC; Bitrate 96 Kbps
  4. Codec: MPEG video;? Variable or Constant; Bit rate 25 Mbps; 1440 x 1080i. Frame rate: 25 fps

  Sound: MPEG Audio AC-3; Bit rate: 384 Kbps

  I tried to read as many threads as possible in this regard, but couldn't find much on the internet and most son/tutorials are quite old and refer to previous versions of Premiere Elements. I tried to merge it with Premiere Pro, after reading this (https://helpx.adobe.com/premiere-pro/using/importing-sequences-clip-lists-libraries.html; ( http://www.mediacollege.com/adobe/premiere/pro/import/), but I've struggled, as in the two references, it was either too little info or the guideline was not clear to me.

  I also saw wires on clipboard Extender (ClipMate and Spartan Lite) https://forums.adobe.com/thread/1148100 I downloaded Spartan Lite, but that seemed pretty confusing.

  I'm very uncomfortable to use intermediate files (https://forums.adobe.com/thread/875797?tstart=0) that I have enough space on my drive hard, but made a loose quality? On the other hand, I suppose it might be good for me to start using Premiere Pro now.

  What is the current consensus?

  Then I have another question and I don't know if I need to open a new thread for this. As I have shown above, the clips have all different characteristics and some files prel are save as 1440 x 1080 (where the scene starts with a clip of nr 4, others like 1920 x 1080) I guess I should have converted clips all to the same specification before editing, but I did not. There was so much work involved in this process that I can't think to change to a format and replace them current clips, etc. With the rendering, the different specifications will be a problem?

  One last question - I guess I just need to go to the BD and DVD specifications, or should I also realize the whole project in a format without loss of keep for possible future use?

  Another option is to use Cineform, who is a Visual lossless codec and produces smaller files means then Lagarith.

  Download Gopro Studio and install.

  This will give you the codec.

  art http://Shop.GoPro.com/EMEA/softwareandapp/GoPro-App-%7C-Desktop/GoPro-Desktop-App.html#/St = 1

• What is the purpose for "/ etc/ssh/ssh_config" and "/ etc/ssh/ssh_config.esx4" file

  When upgrading from ESX 3.5 to ESX 4, I see/etc/ssh/ssh_config and etc/ssh/ssh_config.esx4.

  When you install an ESX 4 update, the file ssh_config.esx4 does not exist.

  What are the objectives for the two files?

  I bet the .esx4 file is recommended ssh_config file but in the case where you have changed your file ssh_config will not overwrite the installer - this is why there is no .esx4 file when you perform a clean installation, there is no file pre-existing ssh_conffig - you took a look at the two files is it differences - the two must be text files -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Faced with the conversion of an U8 2D array data in a Matlab file format?

  I'm trying to convert a simple 2D array of U8 (3 channels) data in a matlab file format.  I was manipulate the examples in the labview2matlabni record - but I can't read in Matlab - the matrix is not readable - said inconsistent number of columns.

  I have included my vi with a sample data as input.  I'm sure this shouldn't be so hard!

  Thanks in advance - all help is appreciated!

  If you have not already, doen

  You can check this site, http://matio-labview.sourceforge.net/. In my view, there are screws to back up or to import files dull.

  See you soon,.

  McDuff

• What is the range of temperature for the 9219 and 9211 measurement modules using a K type thermocouple as the sensor?

  Hello

  hope I posted in the right place. I'm about ready to buy a cDAQ-9172 chassis and modules temperature 9211 or 9219 universal. I have not yet taken my mind yet. Then, I thought that one of them would make the temperature range required that I need. I need to go from-40 ° C to + 200 ° C and I will use a K type thermocouple. Does anyone know what are these upper and lower limits with this configuration?

  Thank you

  Mike

  9211 entry record indicates the tension... measuring range ± 80 mV

   

  A quick check on Omega web page http://www.omega.com/temperature/z/pdf/z204-206.pdf indicates this combination will be easilly cover your range of operation.