Similar Questions

• With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  Windows XP 64-bit is one of those odd elements that does not quite fit in.  It is based on the code of Windows Server (hence why it only goes back to the SP2 not SP3 as Windows XP did) so it is - upgrade (for purchase in any case) options are limited.  Frankly - Windows XP 64-bit is one of these products, most people should have just skipped (in my opinion) - and with this in mind - the replacement for those running it should be to get Windows Vista 64 bit or Windows 7 64-bit or 64-bit Windows 8.  It there just will be no discount to do on monetary incentive plan.

  My suggestion - if your system is good enough, compatible, etc. and you actually * needed * to upgrade (it's not like YOU all just because Microsoft will stop their support extended to it in 2014 - big deal?)  Download Windows 7 Professional 64-bit and clean install.  You can use the free Windows XP (32 bit) MOU to run many older programs, you have * if * you have one that cannot be run under Windows 7 or with the compatibility mode.
   
  In addition - get an unknown computer (for you).  You can find a lease one or something with Windows 7 64-bit, probably for the same amount you'd pay for a version non - OEM Windows 7, pay a little more and you'll probably have a machine that could handle Windows 8 - If you wish.  ;-)

• What is the replacement for Acrobat 9 Pro Mac (in English)?

  I have CS5 Design Standard, which came with Acrobat 9 Pro. I'll put it up on a new computer, but it seems that Acrobat 9 Pro Mac (English) no longer exists. That is BS, of course. So, what is its replacement?

  You should check with the people in the forum of the Installation of Acrobat.  Be sure to provide information on your system.

  The Installation of Acrobat & update questions

• backKeyHandler() function not present in ViewNavigatorApplication... What is the replacement?

  The function 'backKeyHandler()' which was once within MobileApplication is no longer present in the new ViewNavigatorApplication.

  Anyone know what the replacement feature is for ViewNavigatorApplication?

  It was renamed backKeyUpHandler.  Remember that an event 'backKeyPressed' has been added to points of view that can be used to respond to a back key press event.

  Chiedo

• What is the replacement of design mode in flex builder 4.7 for builder extension cs?

  Because design view is not available in flash builder which is the use of the generator of the extension in the design of the user interface now let us design the user interface with the xml code that is very tedious and boring if there is no replacement for him only please aident.1 one more thing I want to know is that when I make new default project in the generator of expansion (flash builder 4.6) it also not able to load the errror creation mode is

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins\com.adobe.cside.libsinstaller_2.0.0.4-33034\archive\cslibs\2.0\4.5\re lease\apedelta.swc and no respondingSWC file failed to load. Everything depends on this file component SWC does not appear in the Design Mode.The CFC does not load because of:

  * Incompatible definitions caused by the use of a different version of the SDK

  * Missing class definitions referred

  I searched quite considerably and my understanding is that Adobe did not intend to support Design view more for Extension Builder.  In my opinion a very disappointing decision and one that is difficult to understand.

  The best solution I can find is to create the majority of your design in a Builder Extension parallel, right, of the project and then convert/import your design in your Extension.  It certainly isn't as satisfying that having the Design view for the Extension that you write, but it is better than to simply create your layout: guess/trial and error.

  Although this has not been announced by Adobe, I have a suspicion that the reason why they decided to not to put other resources in design of fixing what Extension Builder as we know it will be dropped soon, probably replaced by a method of creating extensions to HTML5/JavaScript.  My problem with this is that, other than to reassure that there are reasons of compatibility backward support for legacy extensions, it will not be a way of compiling an extension in a way that prevents people from seeing your code.

  It's all speculation, and I guess we will have to wait and see what happens.  Hope this has helped.

• What is the replacement for "configure Reference Levels.vi niScope.

  I just put my driver OR-Scope of 3.4 to 3.6 and now the VI, "set up reference Levels.vi niScope" is missing in the instr.lib\niScope\Configure\ directory. I found an old version under niScopeObsolete.llb but this version uses DLL calls where the 3.4 version used nodes of property. What became of this VI and where can I find a covering memo telling me that this feature has been removed?

  Thank you

  Charles

  Hi Charles,

  I looked back through the files on the disk and the oldest version I found this VI was about seven (can't find the files before this date) years ago. It was located under the folder \Measurements\Obsolete even at this time, and it seems to be the same VI (he calls in the DLL). The following year he then changed locations to the niScopeObsolete.llb directory. I was unable to find a version that contained simply property nodes, but you are right that the features are essentially the same. Actually, this is the most likely reason that it is not a top-level function that exists in one of pallets of NOR-SCOPE function, since it is only used in some measures specific and exact functionality can be achieved through the use of knots of property.

  You are able to make use of the current version you found in niScopeObsolete.llb or maybe just nodes of property without any problems? I'm interested in knowing what else was different with the 'new' version that you had with the nodes property. Is that what the icon and/or documents of the VI is different? Do you still have this VI you can join? I want to assure you that this change did not affect your application beyond the confusion to have the situation has changed.

  Kind regards

• Smartphones from blackBerry Torch 9860 abandoned, what is the replacement?

  I contacted my provider to order a new phone for a new employee and told me the Torch 9860 was interrupted, and there is no replacement for it.

  Can someone shed some light on why this model was abandoned and if there will be a replacement for it?

  It might have been interrupted by Telus, but not RIM/BlackBerry.

  You will need ask Telus why they discontinued it!

• What is the replacement of eval in AS 3.0?

  Hello

  I have 4 movieclip in the stadium. Its instance names are mc_1, mc_2, mc_3 and mc_4.

  To change the x posititon of this movieclip I can use the code AS below 2.0. It works very well.

  for (i = 1; i < = 4; i ++) {}

  eval("mc_"+i)._x += 10

  }

  I would like to know how to write this statement in AS 3.0. Any help...

  Thank you

  ayathas

  If these are the names instance that you assigned via the properties panel, you can use the support rating:

  for (var i: uint = 1; i<=4; i++)="">

  This ["MC_" + String (i)] .x += 10;

  }

  The notation of support also works in AS2.

• L-ASA-SSL-50 = replacement sku

  Hello

  Im trying to order the Premium SSL user license but I have noted that its end of life. I noticed that his being replaced by the more Anyconnect / Apex licence. Im getting confused with the new SKU. What is the replacement of L-ASA-SSL-50 = reference?

  You are welcome.

  Please indicate your question as answered if it was.

• What is the life expectancy of the battery in the pen of Apple? Can it be replaced or do I need to buy another pen?

  What is the life expectancy of the Apple pencil? The battery can be replaced or do I need to buy a new stylus?

  According to iFixit (of https://www.ifixit.com/Teardown/Apple+Pencil+Teardown/52955 )

  • The pencil is clearly not intended to be opened or repaired; You can't get inside without destroying the device.
  • The layers of plastic and metal holding the interior components are impossible to remove without grinding.
  • The battery enough for a 12 hour race, is impossible to replace, which gives the device a limited life expectancy.

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• HP 14-r025tx: what is the maximum size of hard drive I can replace my default one? &amp; other hard disk performance issue

  My default hard disk is almost full and I plan to update. What is the maximum size that this model could overcome? Very well is 2-3 to?

  Another question.

  I replaced my optical drive to a box with a 250 GB SSD HARD drive inside. I installed my new operating system here, and makes the default boot drive. The default value of HARD drive that comes with the laptop is my backup drive. This is configured by okay?

  or

  Do I have to put my SSD on the default HARD drive space and put my 2 to/3 TB harddrive on the caddy for maximum performance?

  Hello

  1. in theory, you can get 2 TB or TB but 1 TB has better peformance.

  2. you cannot boot from the caddy. My suggestion: use for normal Bay and 2 TB SSDS in the caddy. You both what you want.

  3. as (2) above.

  Kind regards.

• What kind of card do need me for the replacement of mini

  Hi - First of all some context.   My husband has dementia and the only thing he can still do is some art works and send them to friends and surf the internet.   He spent hours on his old Mac Mini up to last week, when the hard drive is dead.  I took it to the Genius Bar and they said it was really dead.   The good news is that we have Time Machine and Time Capsule backup and my step son has sent us one of her old Mini as a replacement.  The problem is that the port for the monitor is totally different.  The monitor is an apple screen, but it does not replace Mini

  So I'm a bit confused as this kind of cards that I need to do all work.   Attached are some pictures of my problem:

  1 is the oldest mini back showing the port on which we used on it to connect the screen

  2 is the replacement sent by the son-in-law mini.   Display port is circled.   This is what it takes to go in.
  3. is the wire at the back of the Apple screen we have.   It is an older display.   He has three sons (one is a USB cable that we never used) the wire we used is circled.  I don't know what about the other wire.

  4 is a bulk of the wire have been used and the other wire of mystery.

  Can someone help me understand what I should buy?  Thank you!

  

  

  If I am accurate, your Mac Mini replacement is older than your previous Mac Mini; so, you will need to buy an older cable/adapter to connect to the computer with your screen. I don't know the model number of your monitor, but on the side of the computer, there must be a kind of "DVI". (Not Mini DisplayPort, Micro-DVI, or Mini-DVI)

• Get (5) different SAS errors for more than a year. Finally noticed after a disk RAID 1 is dead and the replacement drive will not ready. What is my controller?

  Just noticed newspapers Windows for my 6/iR PERC have been reporting these errors almost every day for a year, is my bad controller?  If Yes this is very unfortunate because it is integrated.

  1.) sense unexpected. SCSI sense data: Sense key: sense 3:11 qualifier detection code: 1: physical disk 0:0:0 controller 0, slot 0

  2.) SAS port report: SAS wide port 0 link lost on PHY 0. : controller 0 (SAS 6/iR integrated)

  3.) predictive Failure reported: physical disk 0:0:0 Controller 0, slot 0

  4.) (ERROR MORE RECURRING): a disk media error has been corrected. : virtual disk 0 (virtual disk 0) controller 0 (SAS 6/iR integrated)

  5.) \Device\RaidPort0, restore the device, has been published.

  Hello.

  In addition to the Windows logs, what is the status of the disk (VD) virtual and physical disk 0:0:0 in the BIOS of the controller or the OpenManage Server administrator? If the status of predictive failure is constantly reported, then you can consider replacing the physical disk 0:0:0. If the replaced disk is offline, try to force if online via the controller BIOS. Make sure that your BIOS and controller firmware is up-to-date.

• Startup disk has failed - what are the options for replacement

  I have a Dimension 8400 BIOS A05 running (if I can remember you corrrectly). The SATA C drive supplied with the system crashed recently and will no longer start up. I tried various diags, but they all fail. I also had a USB drive adapter to try to access the drive from another computer... the disc turns, but I do not see the drive.

  I want to know what constraints and options are there in the choice of a replacement drive? (I wonder if I am limited on ability. The original drive is a WD740GD-75FLA1 (74 GB). Could I replace it with a SATA capacity more (I don't mind if the replacement is a WD drive again or not.)

  And, keeping in mind the BIOS, I must update that when I replace the HARD drive?

  In addition, this good old machine still runs XP SP3 and I plan to switch to Win 7 at the time of the installation of the new disc. Points to consider regarding the choice of the player?

  BTW - some time after the purchase of this PCI added a second drive hard - one 250 GB SATA drive. Do I need considered as in the choice of the total capacity of the disk online, I will be once the new drive arrives? Oh, and although I don't speak of this second disc - it works fine with the USB adapter so my problem looks like most likely to be a disk problem rather than say, a question of power cable or block.

  Thanks in advance for your comments.

  Andy

  Any standard desktop SATA drive under 2 t fine - having said that, what you have now is a WD Raptor 10 K RPM drive.   They are now called Velociraptor - if you are looking for this level of performance of the player, they are the only SATA 10 K rpm disks designed to use desktop.