What is the session Manager button?

Similar Questions

• What is the software Manager?

  What is the software Manager

  Hello and welcome!

  The software Manager is a program that is installed on the PC Original Equipment Manufacturer. This allows to keep the programs pre-installed in day.

  How does it work?

  Update notice include the size of the update, and a description of the software update. In this list, choose the updates you want to install. Clicking on a list update allows you to learn more about the update or remove the update notice.

  Also, Internet Explorer 10 is exceeded on Windows 7 and I would recommend that you upgrade to Internet Explorer 11 via this link:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-11-worldwide-languages

• On the session manager

  Hello
  
  I have a question about the session manager, I run a report, then I go to the session management to see sql generated by the report, but I find several segment of sql, why it generated so many sql,.
  
  and how can I confirm that sql is complete for this report.
  
  Thank you in advance!

  You can find your id connection or the approximate running time or by logical status request.

• How to remove the mouse? What is the Quiz Manager?

  I think I found an answer. Click on the Blank. Right?  :-)

  1. I still don't know how to remove the '' mouse. '' Help, please.

  2. I inserted a Question slide and specified as a poll. How can I deselect the 'right answer '? Or, why the second slide that is the result should be added even if it is investigated. Or, how can I get the result of the survey? (this can be advanced skills?)

  3. I deleted the second slide added automatically and a message that says: "if wanting to come back, go to the Quiz Manager. What is the Quiz Manager? Where is he?

  I really appreciate your help.

  ...................................

  > I'm a beginner.

  > I dragged a jpg image she draws on a blade. I got to know that he is sitting on a background. I have found a way to replace it with different images, but cannot find a way to remove it. Could you help me?

  > another Q is, how can I remove mouse? I can move it around, but cannot be removed. THX.

  Post edited by: winnn123

  Post edited by: winnn123

  Sorry I have not responded to your last questions, but we live in different time zones, and I was asleep.

  I am pleased to have been useful. Feel free to ask questions. Captivate deserves to take some time to learn it. I have tried many other software to develop active learning and finally CP has become my absolute favorite. So I want to help the starters as much as possible...

• What is the fourth control button in the upper right window of 4 FF?

  I had to reinstall FF4 during cleanup of virus and there is now a 4-button control displayed in the upper right of the window. From the right, there are the usual 'close' (red), 'Restore down' and 'Minimize' buttons (the two blue), and then there is a fourth, the green button, with no 'ToolTip' that are associated with. What is the attitude of this new button?
  I'm not normally this curious, but I had just a fight against malware 'Antivirus Antispam 2011' and am very sensitive to the new graphics that I don't recognize.
  I am running XP Pro.
  Thank you!

  You can post a screenshot of it?

• What is the delivery Manager?

  When I download updates, I always get an error message.

  When my computer starts, I get this message "Delivery Manager has stopped working" - Windows is trying to find a solution to this problem and advise you

  Hello bujeau,.

  Thank you for using Microsoft Windows forum.

  You are probably using Kontiki, a peer-to-peer file-sharing service used by companies such as Sky, BBC and Channel 4 television to distribute video. Right-click on the taskbar in Vista, and then select the Task Manager. Check the tabs to see whether you are running KService.exe or Khost.exe in the background. Uninstalling the Kontiki software should solve the problem. However, if you want to keep your TV on demand service, you need to reinstall it.

  It is a known problem and there are many users experience this issue with a party trid program. See the following links with a similar question.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/47bb7f09-e9d5-4a9d-B3E2-a659a83b6c1f
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c91e482-e682-467B-86b5-200b3958642b
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/caa94cfd-c8b6-4fa1-97bb-c7df129171f6
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/d58962c9-2877-4491-B404-c6f25c43bf02
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c91e482-e682-467B-86b5-200b3958642b/

  Try to perform the clean boot and check if that helps

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Follow the steps below to put your computer in a clean boot state:

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. sign the computer by using an account with administrator rights.

  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click OK and then click on restart.

  Check the link to learn more about the clean boot below:
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  Kind regards
  Aziz Nadeem - Microsoft Support

• People with disabilities maximize triggers the Task Manager button

  Maximize the error button:

  When any window dialog desktop application to maximize button is disabled, then normally it seems turned off and we couldn't maximize thanks to keyboard shortcuts or mouse.

  But if we open the Task Manager and select the application and click on Windows > maximize, then the dialog box is maximized, but I never want this aspect in my application.

  This is mistake or not?
  This applies to all windows applications including the applications that are included with the installation of windows.
  Please answer me.

  Hello

  This feature is normal and is not supposed to be a problem with the computer. Feel free to post all other queries that you have associated with Windows.

• STOP: c000021a {fatal system error} the Session management cannot create protected prefixes

  My Dell Inspiron 1545 gives me this message and not going anywhere

  «STOP: c000021a {fatal system error} The Session handle cannot create protected prefixes system process finished in unexpected ways with the status of 0xc000003a (0x00000000 0x00000000).» The system has been shur downwards. »

  Any suggestion on how to solve this problem? Thank you

  If all those who are unable to work, (they have not for me)...    I have a Win7 pro running Toshiba Satalite, and after a few weeks to get slowly mad and furious... I did...

  Went to the toshiba Web site updated BIOS drivers.

  installed (all automatically)

  Restarted

  Fixed
  ------------------------------------------------------
  all together took about 3 minutes. man, I was happy...

  Here is the link to your BIOS updated

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WW1&OSL=en&SystemID=INSPIRON1545&CATID=-1&impid=-1

  I hope this works...

• WLAN controlled WEB AUTH, what is the session re-checked after initial authentication?

  I intend to use the Web (with external server) on controller Cisco WLAN authentication.

  Unfortunately, I have none not one with which I can experiment and impossible to find the following information in the documentation.

  Once a user authenticates successfully the first time, when authentication is performed again?

  Is - this periodical? Or maybe specified in the message of acceptance of access?

  Thanks for your help.

  I do not think that something is done in the background / transparant when the session timeout occurs.

  If RADIUS sends you a Timeout for the Session of 30 minutes, then 30 minutes the WLC puts the client in a State of Web Auth required yet. In which case, they will have to open the Internet browser and send the credentials again (manual process).

  The session timeout is a hard-stop to force re-authentication...

  The access-request/access-accept (as I know) is only for full authentication.

• Access the Session Managed Beans

  If I have a class that is registered in a session bean in the adfc-config...
  
  When it is instantiated?
  
  How can I access it from a backing bean and set its variables?

  I created a simple test case and my comments are the following:

  (1) the bean was not instantiated within the scope of the session until I have it referenced in an EL expression. In my case, I used
  "2) for the first time as #{sessionScope.MyBean.attribute1}" does not work, it causes a NullPointerException.
  (3) I have access to reading via without it having been instantiated so far.

  Point (3) does not correspond to your comments, so I think that your problem is related to something else. Check the declaration of the bean again. Also check that you have not saved an another bean under the same name but different scope and in a different config file (for example, in faces-config.) XML or in a TaskFlow definition file).

  Dimitar

  Published by: Dimitar Dimitrov, November 9, 2010 19:48

• What is the service manager

  I have windows 7 (32-bit); the latest version of internet explore (version 10.0.9200etc) and have got rid of the latest version of flashplayer. By downloading the latest version of Flash Player, it is said that I have to close internet explore everything (no problem) and "servicemanager". I have no idea what this means? (I turned off my AVG, so this isn't the problem).

  Could someone tell me what is this servicemanager and how it close? I would be extremely grateful, because it becomes frustrating! Thank you.

  Launch Windows Task Manager (keyboard shortcut: Ctrl + Shift + Esc)

  Go to the process tab

  Make sure that "Show processes from all users" are checked.

  

  Then locate the servicemanager, select the process, and then click on end process.

  After that, you can install flash player.

• What is the best software of management of fonts for Windows 7?

  What is the best management software fonts for Windows 7 with automatic activation for CC?

  We ran 5 Fusion (suitcase) for years, but it's SO slow with Adobe CC (worked great with stand-alone software versions before CC versions), but it slows down the PC to a crawl now.

  Font management programs out there that work better with CC + have automatic activation?

  Please search for resolution here or you can post the application to the support of Extensis for Adobe Creative Cloud 2015 - manage ThisFont Management, Digital Asset Management and creation of information

  Compatible with Adobe CC 2015 font manager?

  Concerning

  Stéphane

• Tanel Poder ' snapper does watch not what shows the V$ SESSION

  Hi people,

  I have a query that has been running for 3 hours.

  I decided to launch the snapper ASH mode tool to see what event the session is waiting for:

  SQL>@snapper ash 20 1 184
  Sampling SID 184 with interval 20 seconds, taking 1 snapshots...
  
  
  -- Session Snapper v3.64 by Tanel Poder ( http://blog.tanelpoder.com )
  
  
  
  
  ---------------------------------------------------------------------------------------------
  Active% | SQL_ID          | SQL_CHILD | EVENT                               | WAIT_CLASS
  ---------------------------------------------------------------------------------------------
     100% | 2ywsu2t98dbw0   | 0         | ON CPU                              | ON CPU
  
  
  --  End of ASH snap 1, end=2014-02-20 15:07:41, seconds=20, samples_taken=96
  

  With V$ SESSION, you must pay attention to the STATE.

• Need help: understanding of the Session Variables

  Greetings-
  
  Maybe I'm just not understand how function of session variables and
  I hope that someone here can help me to do so.
  
  I am trying to establish an auto-dialing for a client process report
  so when a person displays an online report, a number of declaration is
  generated and stored in a variable session and when information
  is submitted, download number of report and the additional information provided
  a database. Everything seems to work as expected, except for this.
  
  I use an application.cfm file to define the session management and to create a
  Report number and set this number to a session variable.
  
  When the person opens the report form page, there is a teaching section
  for their study, followed by a 'Proceed' button to go to the next section of the
  page.
  
  When they click on the "Continue" button, is when the number of report which is held in a
  session variable (application.cfm) should insert in a hidden for later form field
  upload, which seems to happen.
  
  Now for the part that I don't understand. I thought that both a session
  had not expired, the session variable would remain in use and so if
  the report page has been updated (reloaded) of the same session would be variable
  be used.
  
  What I feel, is that whenever the report page is to be regenerated,
  a new report number is loaded in the session variable. I'm not
  understand how to work the session variables? Am I missing some criticism
  piece of coding or point here?
  
  I have included below the structure of folders and files used in the process
  for review.
  
  Thanks in advance for any help to do this work.
  
  Leonard B
  
  ===============================================
  ===============================================
  
  Folder structure
  area/reports
  -area/reports/input /.
  
  Files
  -domain/reports.cfm <-Entry Point for dealing with the
  --domain/reports/application.cfm
  --domain/reports/input/report_form.cfm
  
  ====================
  application.cfm
  
  < name cfapplication sessionmanagement = "yes" ' LanceApp"=
  SessionTimeout = "#CreateTimeSpan (0,0,20,0)" # ""
  applicationtimeout = "#CreateTimeSpan (0,0,2,0) #" >
  
  < cfset DSN = "datasource" >
  
  < name cfquery = "getnumber" datasource = "#DSN #" >
  SELECT report_number
  OF report_numbers
  < / cfquery >
  
  < cfset Session.report_number = #getnumber.report_number # >
  
  < cfif getnumber.recordcount IS 0 >
  < name cfquery = "insertnumber" datasource = "#DSN #" >
  INSERT INTO report_numbers (report_number) VALUES (1)
  < / cfquery >
  < cfelse >
  < / cfif >
  
  < name cfquery = "updatenumber" datasource = "#DSN #" >
  UPDATE report_numbers
  SET report_number = report_number + 1
  < / cfquery >
  
  ====================
  report_form.cfm
  
  < cfparam name = "Button" default = 'Start' >
  
  < cfif #Button # is 'Start' >
  
  < action = "report_numbers.cfm cfform" method = "post" enctype = "multipart/form-data" > "
  < input type = "submit" name = "Button" value = "Proceed" / >
  < / cfform >
  
  < cfelseif #Button # is "Proceed" >
  
  < div style = "padding: 5px 5px 15px 50px" >
  #Session.report_number # < cfoutput > < / cfoutput > < / div >
  
  < / cfif >
  

  Quote:
  Posted by: Leonard B
  Hi Dan,.
  Thanks for the answer, let me clarify what is the goal. This process of numbering
  is a public service organization. The goal is not to create a primary key.
  but to establish a process of sequential numbering to fill online reports that
  can be reset to zero at the beginning of each year.

  I'm certainly open-minded for doing things in a more easy way and if you have a
  easier, I'm all ears or should I say all eyes. However, with the requirement of
  reset the process back to zero, I couldn't get to any other way of
  treatment of the task at hand.

  Thank you

  Leonard B

  "In this case he would stil be easier to run the following code" number "just before you insert your data. What you have said so far, it's the only time where you really need it.

  But if you want to stick with the application.cfm approach, there is a difference in what you say you do and what your code is showing. You say "I checked to see if the session variable has been set and he has been.", but I don't see any if/else logic in the part of your application.cfm code where you set the variable. Remember, the code runs on each page, including request refreshes.

• Session manager does not work

  I don't know if this goes in the tabs section or the section modules, so I placed it here in tabs.

  I label mix more and that's what happened to me recently:

  I just started firefox; He asked me to restore the tabs and I said 'yes', but all tabs are empty. I thought it was a mistake, then I closed Firefox and restarted and now the sessions don't ask me if I want to restore the previous session. After playing with it, I've broken down and started a new session. Got the essential and other elements, closed firefox and he asked me if I want to save, and I said 'yes '. When I went to open firefox, nothing happened. He didn't ask me to restore the session or anything like that. I checked the session manager and sessions before that I just do (sessions that were there when the bug happened) were there and the session manager still does not work.

  Thanks for your help.

  You can use updates made to TabMix Plus in the tab of the Add-ons Manager, using the context menu.

  Also, TabMix Plus has its ' own support here forum.
  http://tmp.garyr.NET/forum/