What is the temperature of the motherboard to normal operation

Similar Questions

• Satellite A350-02 t on the basis of normal operations, seems slow

  I just bought a new Satellite A350-02 t to replace a non-defective Toshiba laptop. My old laptop was 1.6 GHz AMD Turion Dual Core with 2x256KB of cache L2 and 1 GB of RAM and slow. Often, I have to wait for the programs to load or switch between the screens.

  My new laptop is 2.16 GHz Intel Pentium Dual Core with 1 MB of L2 Cache and 3 GB of RAM and seems to run pretty slow as well. I was expecting to fly compared to my old laptop. And I really haven't had the opportunity to put to the test. Everything I do is surf the internet, word/pdf documents visualization and personalization of the laptop.

  Is this normal or do you think something might not work properly?

  Also, I've first turning on laptop, it took about 2 hours to complete the initial Setup.
  It seems normal?

  Hello!

  Well buddy, it's not easy to tell what is the reason for this and I think that it s only a software application or something else that make the cell phone a little more slow.

  You use Windows XP or Vista? If you are using Vista, you should check this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/FAQ9401B10001R01.htm

  If you have installed some 3rd party applications remove them and defragment your HARD drive at any time.

  If you have any other questions, please let us know.

  Good bye

• What are the motherboard data transfer rate on a HP G60 - 243CL?

  I bought my laptop HP G60 - 243CL of Costco 3 years ago and continues to function perfectly. Since then I have maxed out the 320 Gig HARD drive. A few days ago, I transferred all my multimedia files of a terabyte of 1.5 external HDD. I also removed and uninstalled all the software that didn't come with the laptop pre-installed. I ran the Disk Cleaner to delete the temporary files... etc. I left pretty much the State of Out-Of-The-Box laptop... I also ran the Windows disk defragmentation application.  Although it has all updates from Windows Update. I doubt that the above mentioned is relevant to my question. The laptop came with two modules of RAM PC2-5300... a 1 Gig and 2 Gig. I replaced both with two sticks of modules/memory 2 GB PC2 - 6400. Other that this hardware upgrade, I've also upgraded to Windows 7 Ultimate edition 64-bit. Now, I am also considering upgrading to an SSD HARD drive. I have of course read/write speeds rise as SSD memory ability increases (depending on model)... for ex: there is a huge difference in the rate of data transfer speeds in a 32 Gig SSD compared to a 256 GB SSD. At least that's what I noticed. I want to install a Gig of CRUCIAL 512 or possibly a CRUCIAL 256 GB SSD. Read/write speeds are respectively of 500 MB/s and 260 MB/s, or 230 MB/sec and 190 MB/s (again, depending on the model). My question is noticed in the SUBJECT field. Can you please help me make a wise decision? I wish that more technical details as possible. Thanks... :-)

  This laptop is equipped with SATA I, which is 150Gbit/s. You will not reach the maximum speed of your SSD, but it will be much faster then your current old school disc spinner. An SSD will always exceed a normal HARD drive. In addition, you should see a bump in battery life as well.

  I hope this helps!
  Sean

• What is the difference between "Normal password" vs "Encrypted password" in connection SSL/TSL?

  I thought that SSL/TSL implies a secure connection.
  What it means to use "Normal password" vs "Encrypted password" in "Authentication method" when you use "connection security: SSL/TSL. One of the servers I use only accepts "Normal password", however, Thunderbird does not have the warning "server does not use encryption.

  Use of SSL or TLS means that your login and password, at least, are encrypted. There is no need to manually select the encryption.

  As said, some service providers Internet supported the option of password encrypted in itself; When they care to do it correctly, they offer TLS/SSL. Passwords encrypted, when used, are usually offered instead of SSL or TLS. I think a weakness is that only the password is encrypted, so only with SSL/TLS, your username, your password and potentially all of your message is encrypted.

  https://en.Wikipedia.org/wiki/Transport_Layer_Security

  The key is that you can use to offer the provider ISP or mail. If they offer encryption, use it; If they do not, seek a better supplier. The server configuration governs what settings and options are in use. You cannot choose to use a feature that has not been enabled on the server of its operators.

• HP pavilion notebook 15 - n03: what is the model number of the motherboard for hp pavilion laptop i3 15-n037cl

  While I put a fan 90 b error and it froze on some video games, it was still under warranty but I wanted not to part with them for weeks and tried to clean it myself, I tore from the power button ribbon clip out of the motherboard and it will not power, my first question is that this will be not covered will be?

  My next question is how would you recommend I rectify this error, what is the motherboard model number, so I can get a replacement? and where can I find some information on the permutation of the cpu and fixing what needs to be fixed, thank you.

  Yes. It's a 3217U i3 with Intel integrated graphics

  So this is the motherboard:

  Intel Core i3-3217U DC 1.8 GHz (3 MB L3 Cache, 1600 MHz DDR3, 17 W) for use with Standard Windows. 737982 501

  Also not in stock at Partsurfer.

• Older drivers to the motherboard Compaq "Quest".

  I recently had an old Compaq motherboard. I have no idea what is the model of the motherboard, and the only identifying mark that I can really find about it was a sticker that simply says 'CAMARO '. I was wondering if there was some kind of free program that can tell me what is the motherboard model number. I have another key AIDA64 extreme, and I know that this program will tell me what model number is the Council, but I really don't want to lose the key on this computer, because I was going to put Windows 98 SE on it for my old programs and games. If it helps, I have some info on the map. It's an old Board of Socket 7 who can support the AMD K6 - II CXT 550 MHz processor and has two PC100 RAM slots. It uses the micro-ATX format and has 4 PCI slots. And also, it has integrated graphics, a game port (I'm 99% what is positive) and 3 audio port. You can help because I'm about to give up on this Board.

  Hello

  As you have a Compaq motherboard, I suggest you to report this issue in the Forums of HP Support: http://h30434.www3.hp.com/psg/

  Thank you.

• Adding more than one host ESX and the upgrade at the same time.  What is the order of preference of the operations here?

  We are budgeting for more licenses and hardware for 2014 and want to do immediately in January.  I am trying to decide what is the best order of operations for adding two vmware hosts additional to our current installation of vsphere and also upgrade our vsphere / esx 4.1 u3 for the latest and best.

  We have 3 Dell PowerEdge R710 running ESX 4.1 U3.  In this vmware cluster, there is a vcenter server 4.1 U3 virtual machine handle this.  The three servers are about 90% memory used so we add 2 additional servers.  Probably the Dell PowerEdge r.620 since we get up 2 in the space of a 710.  Storage is on a san EMC NX4 NFS which will become too but not yet, let's just deal with the vmware part.

  When adding additional r.620 2, should I install ESX 4.1 on them and join them to the existing cluster and THEN pass vcenter and each one esx?  I ask precisely because 90% of use on 3 current servers, I need 2 other servers to support the update operations take place.  They would be able to repel vmotioned vm while each host receives an upgrade at the same time.

  So which is the best way to go about adding of the hosts and the upgrade?  Would I add as 4.1, then they would be available as targets vmotion and so I have room to start the hosts one upgrade at a time?

  If I update vcenter to the latest version, it is comparable backwards and can manage the 4.1 hosts, but also hosts 5.x?  I guess version 5.5 is the last one I would get from VMWare?  It is right of ESXi, then, how is this ESX ESXi 5.5 4.1 upgrade?  How much storage space do I need for ESXi 5.5, as I'm dechatoiement out of these r.620 Dell and need to know what hard drive to put in.

  The steps that you must follow

  -Updated vCenter Server

  -Upgrade of the ESX hosts (because we do a updating of the material we will install 5.5 on our new guests and add them to the cluster and then dismantle our existing)

  -Upgrade VMWare tools

  -Update data warehouses

  ESXi 5.5 has these storage requirements:

  • Installing ESXi 5.5 requires a boot device is at least 1 GB in size. When booting from a local disk or SAN/LUN iSCSI, a 5.2 GB drive is necessary to allow for the creation of the VMFS volume and a scratch 4 GB partition on the boot device. If a smaller drive or logical unit number is used, the installation program attempts to allocate a region scratching on a separate local disk. If a local drive is not found, the scratch partition (/ scratch) is located on the disk virtual ESXi host, linked to the/tmp/scratch. You can reconfigure /scratch to use another drive or logical unit number. For best performance and memory optimization, VMware recommends that you leave no /scratch on the ESXi host ramdisk.
  • To reconfigure / scratch, see Configure the Scratch Partition of vSphere Client vSphere Installation and Installation Guide.
  • Because of the sensitivity of the I/O devices, USB and SD, the installation program does not create a partition scratch on these devices. Therefore, there is no tangible benefits to the use of the great features of USB/SD that ESXi uses only the first 1 GB. When installing on USB or SD, tent Setup devices to allocate a region scratching on a local disk or the data store. If no disk is local or data store, /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • In Auto deploy facilities, Setup attempts to allocate a region scratching on a local disk or the data store. If no local disk or data store is found /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • For environments that start from a San or use Auto Deploy, it is not necessary to assign a separate logical unit number for each ESXi host. You can co-locate areas scrape for several hosts ESXi on a single LUN. The number of hosts assigned to a single LUN must balance the size of the LUN and behavior I/O virtual machines.

• What is the equivalent of | operator using the Q-quote mechanism?

  Version: 11.2.0.3

  I started a thread on similar requirement last week. I didn't want to resurrect. So, I start a new thread.

  We have a stored procedure called generate_table_stats that meet the stats for tables with a few additional options.

  Usually, this procedure is performed as below

  generate_table_stats exec ('EMP_DTL', 'BASIC');

  We want to generate the exec above instructions dynamically for all tables.

  In the traditional method of quotations, we use the concatenation (|) operator to separate the column names whose values are retrieved dynamically from the table queried.

  Similarly, how can I get a column of values printed when you use the Q-quote mechanism?

  In my column in table_name attempt below must be retrieved from user_tables. But table_name and pipes that are treated as literal string (which is not surprising).

  What is the equivalent of | (concatenation operator) when you use the Q-quote mechanism?

  -Expected results

  generate_table_stats exec ('EMP_DTL', 'BASIC');

  generate_table_stats exec ('CUSTOMER_DTL', 'BASIC');

  .

  .

  .

  -My attempt using Q-quote

  -Using # as the quote delimiter

  SQL > select q'#exec generate_table_stats ('| table_name |', 'BASE'); #' From user_tables;

  Q' #EXECGENERATE_TABLE_STATS('||) TABLE_NAME |', 'BASE')

  -----------------------------------------------------

  generate_table_stats exec ('| table_name |', 'BASE');

  generate_table_stats exec ('| table_name |', 'BASE');

  generate_table_stats exec ('| table_name |', 'BASE');

  generate_table_stats exec ('| table_name |', 'BASE');

  .

  .

  .

  .

  Hello

  The concatenation operator. works the same with any string expression.

  x | There

  Returns a string that is the same as sting followed immediately the string x y, x is

  • a literal string with Q before the first single quote
  • a literal string without Q
  • a VARCHAR2 column
  • a function that returns a string, or
  • any string expression.

  The string can be everything above, too.

  If you concatenate strings of 3 or more, like this

  str1. str2. ... || Suro

  then each of the STRS can be any kind of expression, independent of others.

  If you want to concatenate strings of 3, the 1st and the 3rd being Q-literals and the 2nd being a column, you can do it like this:

  Select q' generate_table_stats #exec (#' | table_name)

  || q ' #, ' BASIC'); #'

  From user_tables;

  Each of literals has its own Q and her own pair of start and end markers (all the ' # s in the example above).

  Since the first string literal has no any single-quotation marks incorporated, it is unnecessary to use Q-rating, and it could be misleading; a person who bed the code might think the actaully string contains ' #'s.  I prefer wriite the query in the form

  Select ' generate_table_stats exec (' | table_name)

  || q ' #, ' BASIC'); #'

  From user_tables;

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Bad video port, can I get an expansion card video or what I need to replace the motherboard?

  I have a Compaq SR2150NX, the monitor works on another PC, but will not be on this one, so I guess the video port is bad.

  Can I get a plug in video card and install it, or do I need to get the motherboard replaced?

  If I can get a video card, I can't know how to disable the frame on one, I need to disable or how I?

  My computer is a HP 5188-6734 motherboard and I can't find this one exactly, but I found a HP 5188-5588 one on e - bay for about $70, which seems to be and seems that I can tell, exactly like what I have.  Can I replace the one I have with this one without any problems?

  Looking for help.

  You are this posting in the wrong forum, this is a forum of the laptop and is a desktop system.

  Yes, you can get a video card, install and use it.  However, you sure is that the video works is not, or is it possible that the video didn't come out because you have a larger problem as the system's not initialization and display at all, because of a sort of failure such as food or the card mother?

  If you have a spare PSU, you can try exchanging it instead of the original.  If you have a spare video card, even a few old (especially some former) PCI worthless, that you can install to see if you get any screen output.  Note that you need to maybe use the CMOS clear jumper or remove the battery for 10 minutes, while the power supply is disconnected after adding a video card, or by deleting and trying to use the video again.

  I don't know if the specifications of the two Councils are quite similar, you should look at the datasheet for your system and compare that against what ebay sellers asking them is capable of.   Generally if you have a processor socket 775 lines they list and your using the same chipset, you should be able to simply plug in the parts and windows must be able to start pretty far to plug-and-play all the minor differences.  This is the situation in which I expected, you can buy the replacement cards model you mentioned and it works perfectly except possibly having to install a driver or two, but I can't be sure without detailed specifications.  They are very close to the info, I have found, might even be just a 2nd revision of the same Council of PCChips where everything what they changed was a clock IC generator or something similar that would not do your use in any way, except that to be sure, you have the good bios when looking on the HP site for the models with this Council in there instead of the bios for your system model #. If they take even a different bios which they cannot.

• Re: What is the normal temperature on Satellite A200 psae6?

  What is the normal temperature on Satellite A200 psae6?

  What temperature do you mean exactly?
  CPU, GPU?

  Notes; the temperature depends on the heat dissipation of the unique pieces such as the CPU and GPU.
  The heat dissipation is higher when this part would go with superior performance.
  So it depends on the use of the laptop how temperature would increase

• What is the normal temperature of CPU of a 2006 model 2.2?

  What is the normal temperature of a CPU 2006 2.2 model MBP?

  The temperature is a function of the number and types of applications you have open, room temperature and how the MBP itself is physically installed.  I have seen temperatures as low as 38 ° c (rare) upwards to 90 ° c (resource intensive applications).  Non-intensive some applications using usually results in a temperature between 40 ° c to 50 ° c.

  Ciao.

• What is the input voltage max of the motherboard on Satellite 1110?

  What is the maximum voltage for the motherboard in the Satellite 1110 please?
  Because my current cpu (1.5 ghz celeron) is 1.025 volts and I would like to change the processor
  something faster (cooling will be treated with btw XD)
  The only problem being that the new processor needs 1.3 volts to run.

  Any info wud b appreciated

  Is that not every processor is compatible with the motherboard.
  1110 series computer are supported on the Intel Mobile Celeron processors up to 1.8 GHz.
  Other processors are not compatible and the laptop won't work with faster processors.

• What is the acceptable battery temperature

  Are there standards saying that I should be concerned if the battery temperature exceeds beyond some threshold value. In the case of our Moto X play, what is the acceptable battery temperature.

  Answer to this question must respond to requests of many people in different forums and comments that cry on the Moto X play not hot. I use it for 3 weeks with normal use and a rare game here or there, I have not found it is hot. CPU - Z showed me the highest temperature of the battery around 35 degrees c.

  If the phone gets too hot it will stop before is damaged. I've never seen the official temp what when that happens however. If I had to guess it's probably around 125 F. It could be higher. I guess just right. I hope this helps.

• What Version of SATA has the motherboard ASUS M2N68-(Narra2)?

  Hello

  I want to improve my HP a6150de with a SSD desktop PC.
  I'm not in a position to know what SATA version (1, 2 or 3 GB of a.k. 1.5/3.0 or 6.0) comes with my

  ASUS M2N68 - Map (Narra2) mother.

  I have tried several hardware analysis tools, also checked the ausus homepage and the specification on the HP

  Home page (http://support.hp.com/us-en/document/c01080282).

  Does anyone know what version it is? I have colleagues SATA 2 alias 3 GB

  Thank you

  Ivo343

  Hello:

  You guessed it right, but I have no price to give you.

  http://www.nvidia.com/object/mobo_gpu_tech_specs.html

  You will find all the technical specifications for the chipset of the motherboard of your PC in the 3rd column on the right.