What is total VPN
Recently, while Safari or on a facetime call I get a pop-up warning that my IP address is exposed and others can see my sensitive information and goes on to say that to protect my information and hide my IP I should download Total VPN. I googled VPN and got another pop up window but no information. I force quit safari and have since been ignoring the message. Someone can tell me what total VPN is and is there a way to avoid this popup?
Thank you
Nadia Kronfli
Free Malwarebytes Anti-Malware for Mac allows you to remove malware.
https://www.Malwarebytes.org/antimalware/Mac/
Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.
Once this is done, exit Malwarebytes Anti-Malware.
Tags: Notebooks
Similar Questions
-
Hello
I had a subscription to a VPN, especially since I can do banking online in public places. But as I was put in place, this message came from the Mac network settings:
"When you use PPTP, password and all data sent or received on this connection can be read by your internet provider"
Should I be worried? Is there really a danger to my ISP, I access my banking information?
Any thoughts would be appreciated!
Yes, you should be concerned because it's a privacy issue. You must protect your banking information and you must be careful about this. For your convenience, I suggest you go through the service providers Bank vpn and choose the best vpn for yourself. I personally recommend to use VPN TOTAL because it gives the L2TP and OPENVPN protocols (more reliable and stable, even behind routers wireless, on untrusted networks and Wi - Fi hotspots) that will provide the military-grade encryption to your banking information.
Answer me if my information will help you a bit
-
Hello
I would like to ask a few details & concerns on our existing VPN configuration.
1. What is the Cisco VPN client recommended for users of Windows 7 and 8? Is there an official documentation for this Cisco? We currently use customer VPN Ciso 5.0.7.
2. we are running IPSEC VPN with only 1 gateway & only local authentication (No ACS) for our client. Recently, we have some concerns that they are the VPN connection is down. Whereas if I'm the one connected to the VPN, my connection is stable. Is there any point that we must consider up in the network. Is there a better configuration or solution that we could recommend to the customer as SSL VPN?
3. If you want to use SSL VPN anyconnect secure mobility & we want to implement redundancy on the FW, how will the license work?
Thank you!
An AnyConnect-based VPN is the replacement recommended for remote IPsec VPN access. (source)
AnyConnect can use SSL or IPsec (IKEv2) for transport.
For an ASA redundant firewalls (running 8.3 (1) or later) any permit required AnyConnect are shared between them. that is, you just buy licenses for a member of the HA pair. (source)
-
SonicWall VPN PIX - does not, could someone help?
Hi all
I'm trying to set up an a 506th PIX VPN tunnel (firmware 6.3 (2)), a firewall SonicWall Pro. It does not at the moment. Phase 1 is ok but the phase 2 is not, the VPN tunnel has not been established, and the security association is removed after a minute or two. I enclose below the PIX config and an attempt to create VPN tunnel debugging output (slightly modified and cut for reasons of confidentiality). The PIX already has other two VPN configured which work perfectly.
I would be very grateful to anyone who could help me answer the following questions about this VPN configuration:
1. to debug output, which means the next?
ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
2. in the config, I don't know if the 3 static controls are necessary and how it might interact... What do you think?
3. in what order things happen in the PIX when traffic is from the local network to remote network by VPN? What is NAT then treatment then setting up VPN to access list? or or treatment, then NAT and VPN to access list? or another possibility?
4. How can I get it work?
Thank you very much in advance for any help provided,
A.G.
########### NAMING #################################
vpnpix1 - is the local cisco PIX
remotevpnpeer - is the Sonicwall firewall remote
Intranet - is the local network behind PIX
remotevpnLAN - is the remote network behind the SonicWall
################ CONFIG #############################
6.3 (2) version PIX
interface ethernet0 10full
interface ethernet1 10full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
.../...
hostname vpnpix1
.../...
names of
name A.B.C.D vpnpix1-e1
name X.Y.Z.T vpnpix1-e0
name E.F.G.H defaultgw
intranet name 10.0.0.0
name 192.168.250.0 nat-intranet
name J.K.L.M internetgw
name 10.M.N.P server1
name Server2 10.M.N.Q
name 10.M.N.R server3
name 192.168.252.0 remotevpnLAN
name 10.1.71.0 nat-remotevpnLAN
.../...
object-group network server-group
description servers used by conencted to users remote LAN through a VPN tunnel
network-host server1 object
host Server2 network-object
network-host server3 object
.../...
access allowed INCOMING tcp nat-remotevpnLAN 255.255.255.0 list object-group server-eq - ica citrix
.../...
OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0
access list permits INTRANET-to-remotevpnLAN-VPN ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN
.../...
IP address outside the vpnpix1-e0 255.255.255.240
IP address inside the vpnpix1-e1 255.255.252.0
.../...
Global 192.168.250.1 1 (outside)
NAT (inside) 0 access-list SHEEP-to-remotevpnLAN
NAT (inside) 1 intranet 255.0.0.0 0 0
.../...
static (inside, outside) server1 server1 netmask 255.255.255.255 0 0
public static server2 (indoor, outdoor) server2 netmask 255.255.255.255 0 0
public static server3 (indoor, outdoor) server3 netmask 255.255.255.255 0 0
static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0
.../...
Access-group ENTERING into the interface outside
Access-group OUTGOING in the interface inside
Route outside 0.0.0.0 0.0.0.0 internetgw 1
Route inside the intranet 255.0.0.0 defaultgw 1
.../...
Permitted connection ipsec sysopt
.../...
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN - TS1
.../...
map BusinessPartners 30 ipsec-isakmp crypto
card crypto BusinessPartners 30 matches the INTRANET-to-remotevpnLAN-VPN address
card crypto BusinessPartners 30 set peer remotevpnpeer
card crypto BusinessPartners 30 game of transformation-VPN-TS1
BusinessPartners outside crypto map interface
ISAKMP allows outside
.../...
ISAKMP key * address remotevpnpeer netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 28800
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 28800
part of pre authentication ISAKMP policy 30
ISAKMP policy 30 3des encryption
ISAKMP policy 30 md5 hash
30 1 ISAKMP policy group
ISAKMP duration strategy of life 30 28800
.../...
: end
################## DEBUG ############################
vpnpix1 # debug crypto isakmp
vpnpix1 #.
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10
ISAKMP: 3DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: duration of life (basic) of 28800
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 500
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): processing ID payload. Message ID = 0
ISAKMP (0): HASH payload processing. Message ID = 0
ISAKMP (0): SA has been authenticated.
ISAKMP (0): start Quick Mode Exchange, M - ID - 1346336108:afc08a94
to return to the State is IKMP_NO_ERROR
ISAKMP (0): send to notify INITIAL_CONTACT
ISAKMP (0): sending message 24578 NOTIFY 1 protocol
Peer VPN: ISAKMP: approved new addition: ip:remotevpnpeer / 500 Total VPN peer: 3
Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt incremented: 1 Total VPN peer: 3
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP (0): processing NOTIFY payload Protocol 14 1
SPI 0, message ID = 476084314
to return to the State is IKMP_NO_ERR_NO_TRANS
ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): start Quick Mode Exchange, M - ID 1919346690:7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (1: 1)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (0/2)... mess_id 0x7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (2/3)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (1/4)... mess_id 0x7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): start Quick Mode Exchange, M - ID - 1475513565:a80d7323
ISAKMP (0): delete SA: CBC vpnpix1-e0, dst remotevpnpeer
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: drop msg deleted his
ISADB: Reaper checking HIS 0x10ff1ac, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt decremented for: 0 Total of VPN peer: 3
Peer VPN: ISAKMP: deleted peer: ip:remotevpnpeer / 500 Total VPN peers: 2
ISADB: Reaper checking HIS 0 x 1100984, id_conn = 0
ISADB: Reaper checking HIS 0x10fcddc, id_conn = 0
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: its not located for ike msg
#####################################################
Get rid of:
static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0
You don't need it. Change:
OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN
TO:
access list permits OUTGOING ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 remotevpnLAN
This indicates the PIX not NAT IPSec traffic. NAT happens BEFORE IPSec in the PIX, so if you the traffic IPSec nat it will never match your crypto access list and will not be encrypted.
This, however, should not stop the tunnel of Phase 2 of the course of construction, they would stop flowing above the tunnel, traffic, so you still have a problem somewhere. What I'm guessing, is that the Sonicwall (SW) has a different encryption-defined list access, it must be the EXACT OPPOSITE of what is configured on the PIX. In other words, the SW should be encrypting the traffic of "remotevpnLAN-24" "intranet/8", make sure that the subnet mask ar ETHE same too. "
To answer your questions:
1. it simply means that the PIX has not received a response and is to retransmit the last ISAKMP packet. The process_block simply means that the PIX has dropped a package that was to be encrypted because the IPSec tunnel has not been built. If you get the tunnel built, these messages will disappear.
2. the 3 first static does not appear to be linked to the tunnel IPSec, if they are simply to access a server inside, then they will not affect this VPN tunnel. The last of them should be deleted, as I already said.
3. for traffic initiated from inside the PIX, the order is incoming ACL, then NAT, IPSec processing. That's why your OUTGOING ACL must allow traffic first, then your NAT 0 statement refuses to be NAT had, then the encryption function is the traffic and the number.
4 do what I said above :-)
If you still have no luck, re - run debugs, but initiate traffic behind the Sonicwall, in this way the Sonicwall will try and debug of build that the tunnel and you will get more information on the PIX. Mainly, we'll see what traffic model the SonicWall is configured to encrypt (you don't see if the PIX initiates the tunnel).
-
termination of VPN client 4.0 on pix 515
I am trying to connect the cisco 4.0 vpn client to a worm of pix 515 6.1 and receive as a result of errors that I guess are the related hashing algorithm but am not sure. Only DES is not enabled 3DES. Config output Cisco post interprets but apparently no error in config.
Journal of VPN client:
Cisco Systems VPN Client Version 4.0 (Rel)
Copyright (C) 1998-2003 Cisco Systems, Inc. All rights reserved.
Customer type: Windows, Windows NT
Running: 5.0.2195
1 10:58:34.890 25/09/03 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 10:58:34.906 25/09/03 Sev = Info/4 CVPND/0xE3400001
Microsoft's IPSec Policy Agent service stopped successfully
3 10:58:34.906 25/09/03 Sev = Info/4 CM / 0 x 63100004
Establish a connection using Ethernet
4 10:58:34.906 25/09/03 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "x.x.x.226".
5 10:58:35.953 25/09/03 Sev = Info/6 IKE/0x6300003B
Attempts to establish a connection with x.x.x.226.
6 10:58:36.000 25/09/03 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Nat - T), VID (Frag), VID (Unity)) at x.x.x.226
7 10:58:36.000 25/09/03 Sev = Info/4 IPSEC / 0 x 63700008
IPSec driver started successfully
8 10:58:36.000 25/09/03 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
9 10:58:41.093 25/09/03 Sev = Info/4 IKE / 0 x 63000021
Retransmit the last package!
10 10:58:41.093 25/09/03 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (Retransmission) to x.x.x.226
11 10:58:46.093 25/09/03 Sev = Info/4 IKE / 0 x 63000021
Retransmit the last package!
12 10:58:46.093 25/09/03 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (Retransmission) to x.x.x.226
13 10:58:51.093 25/09/03 Sev = Info/4 IKE / 0 x 63000021
Retransmit the last package!
14 10:58:51.093 25/09/03 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (Retransmission) to x.x.x.226
15 10:58:56.093 25/09/03 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = 20FC277498A5D2DC R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
16 10:58:56.593 25/09/03 Sev = Info/4 IKE/0x6300004A
IKE negotiation to throw HIS (I_Cookie = 20FC277498A5D2DC R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
17 10:58:56.593 25/09/03 Sev = Info/4 CM / 0 x 63100014
Could not establish the Phase 1 SA with the server 'x.x.x.226' due to the 'DEL_REASON_PEER_NOT_RESPONDING '.
18 10:58:56.593 25/09/03 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
19 10:58:56.593 25/09/03 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
20 10:58:56.625 25/09/03 Sev = critique/1 CVPND/0xE3400001
Service Microsoft's IPSec Policy Agent started successfully
21 10:58:57.093 25/09/03 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
22 10:58:57.093 25/09/03 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
23 10:58:57.093 25/09/03 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
24 10:58:57.093 25/09/03 Sev = Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
Journal of Pix:
crypto_isakmp_process_block: CBC x.x.x.194, dest x.x.x.226
Peer VPN: ISAKMP: approved new addition: ip:x.x.x.194 Total VPN peer: 1
Peer VPN: ISAKMP: ip:x.x.x.194 Ref cnt is incremented to peers: 1 Total VPN EEP
RS: 1
Exchange OAK_AG
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform against the policy of priority 1 2
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 3 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 4 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 5 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 6 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 7 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 8 against the policy of priority 1
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 9 against the policy of priority 1
ISAKMP: 3DES-CBC encryption
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4
crypto_isakmp_process_block: CBC x.x.x.194, dest x.x.x.226
Peer VPN: ISAKMP: ip:x.x.x.194 Ref cnt is incremented to peers: 2 Total VPN EEP
RS: 1
Peer VPN: ISAKMP: ip:x.x.x.194 Ref cnt decremented to peers: 1 Total VPN EEP
RS: 1
crypto_isakmp_process_block: CBC x.x.x.194, dest x.x.x.226
Peer VPN: ISAKMP: ip:x.x.x.194 Ref cnt is incremented to peers: 2 Total VPN EEP
RS: 1
Peer VPN: ISAKMP: ip:x.x.x.194 Ref cnt decremented to peers: 1 Total VPN EEP
RS: 1
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): delete SA: src x.x.x.194 dst x.x.x.226
ISADB: Reaper checking HIS 0x80db91c8, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: ip:x.x.x.194 Ref cnt decremented to peers: 0 Total of VPN EEP
RS: 1
Peer VPN: ISAKMP: deleted peer: ip:x.x.x.194 VPN peer Total: 0
ISAKMP: Remove the peer node for x.x.x.194
Thanks for any help
Hello
Pix isakmp policy should have DES, MD5, and group 2 for the 4.x to connect Cisco VPN client, these are proposals that the client sends to the server...
http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/client/rel4_0/admin_gd/vcach6.htm#1157757
This link will show you IKE proposals be configured on the PIX (VPN server)
Arthur
-
506th 3.6.3 VPN client and PIX
Hello
I am trying to build a VPN between Ver of Client VPN 3.6.3 and a 6.2 (2) running of PIX 506e with 3DES.
Firewall # sh ver
Cisco PIX Firewall Version 6.2 (2)
Cisco PIX Device Manager Version 2.1 (1)
Updated Saturday, June 7 02 17:49 by Manu
Firewall up to 7 days 4 hours
Material: PIX-506E, 32 MB RAM, Pentium II 300 MHz processor
Flash E28F640J3 @ 0 x 300, 8 MB
BIOS Flash AM29F400B @ 0xfffd8000, 32 KB
Features licensed:
Failover: disabled
VPN - A: enabled
VPN-3DES: enabled
Maximum Interfaces: 2
Cut - through Proxy: enabled
Guardians: enabled
URL filtering: enabled
Internal hosts: unlimited
Flow: limited
Peer IKE: unlimited
Modified configuration of enable_15 to 22:59:47.355 UTC Friday, December 13, 2002
Firewall #.
I get the following errors:
Firewall #.
crypto_isakmp_process_block: src dest 198, Mike.
Peer VPN: ISAKMP: approved new addition: ip:Mike Total VPN peer: 1
Peer VPN: ISAKMP: ip:Mike Ref cnt is incremented to peers: 1 Total peer VPN: 1
Exchange OAK_AG
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 2 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 3 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 4 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform against the policy of priority 10 5
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 6 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 7 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 8 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4 0x9b
ISAKMP: attribute 3584
ISAKMP (0): atts are not acceptable. Next payload is 3
ISAKMP (0): audit ISAKMP transform 9 against the policy of priority 10
ISAKMP: encryption... What? 7?
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared extended auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0x0 0 x 20 0xc4
crypto_isakmp_process_block: src dest 198, Mike.
Peer VPN: ISAKMP: ip:Mike Ref cnt is incremented to peers: 2 Total VPN peer: 1
Peer VPN: ISAKMP: ip:Mike Ref cnt decremented to peers: 1 Total peer VPN: 1
crypto_isakmp_process_block: src dest 198, Mike.
Peer VPN: ISAKMP: ip:Mike Ref cnt is incremented to peers: 2 Total VPN peer: 1
Peer VPN: ISAKMP: ip:Mike Ref cnt decremented to peers: 1 Total peer VPN: 1
crypto_isakmp_process_block: src dest 198, Mike.
Peer VPN: ISAKMP: ip:Mike Ref cnt is incremented to peers: 2 Total VPN peer: 1
Peer VPN: ISAKMP: ip:Mike Ref cnt decremented to peers: 1 Total peer VPN: 1
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): delete SA: CBC Mike, dst 198.143.226.158
ISADB: Reaper checking HIS 0x812ba828, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: ip:Mike Ref cnt decremented to peers: 0 Total of VPN peer: 1
Peer VPN: ISAKMP: deleted peer: ip:Mike VPN peer Total: 0
Looks like I have a problem of encryption. Here is the biggest part of my setup:
: Saved
:
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password
encrypted passwd
Firewall host name
domain name
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
No fixup not protocol smtp 25
names of
access-list outside_access_in.255.255.224 all
access-list outside_access_in 255.255.255.224 all
outside_access_in tcp allowed access list all hosteq smtp
outside_access_in list access permit tcp any host eq pop3
outside_access_in list access permit tcp any host eq 5993
outside_access_in tcp allowed access list all hostq smtp
outside_access_in tcp allowed access list all pop3 hosteq
outside_access_in list access permit tcp any host eq www
outside_access_in tcp allowed access list any ftp hosteq
outside_access_in tcp allowed access list all www hosteq
outside_access_in tcp allowed access list all www hosteq
allow the ip host Toronto one access list outside_access_in
permit outside_access_in ip access list host Mike everything
outside_access_in deny ip access list a whole
pager lines 24
opening of session
monitor debug logging
buffered logging critical
logging trap warnings
history of logging warnings
host of logging inside
interface ethernet0 car
Auto interface ethernet1
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside some 255.255.255.248
IP address inside 10.1.1.1 255.255.255.0
IP verify reverse path to the outside interface
IP verify reverse path inside interface
alarm action IP verification of information
alarm action attack IP audit
IP local pool vpnpool 192.168.1.50 - 192.168.1.75
PDM location 255.255.255.255 inside xxx
location of router PDM 255.255.255.255 outside
PDM location 255.255.255.255 inside xxx
location of PDM Mike 255.255.255.255 outside
location of PDM Web1 255.255.255.255 inside
PDM location 255.255.255.255 inside xxx
PDM location 255.255.255.255 inside xxx
PDM location 255.255.255.224 out xxx
PDM location 255.255.255.224 out xxx
xxx255.255.255.224 PDM location outdoors
PDM location 255.255.255.255 out xxx
location of PDM 10.1.1.153 255.255.255.255 inside
location of PDM 10.1.1.154 255.255.255.255 inside
PDM logging 100 reviews
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Several static inside servers...
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 Router 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
No snmp server location
No snmp Server contact
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 30 transform-set RIGHT
map newmap 20-isakmp ipsec crypto dynamic dynmap
newmap outside crypto map interface
ISAKMP allows outside
ISAKMP key * address Mike netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup mycompany vpnpool address pool
vpngroup mycompany SERVER101 dns server
vpngroup wins SERVER101 mycompany-Server
mycompany vpngroup default-domain whatever.com
vpngroup idle time 1800 mycompany
mycompany vpngroup password *.
SSH timeout 15
dhcpd address 10.1.1.50 - 10.1.1.150 inside
dhcpd dns Skhbhb
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd field ljkn
dhcpd allow inside
Terminal width 80
Cryptochecksum:0e4c08a9e834d03338974105bb73355f
: end
[OK]
Firewall #.
Any ideas?
Thank you
Mike
Hi Mike,.
You are welcome at any time. Will wait for your update
Kind regards
Arul
-
PIX 515e VPN 3005 concentrator cannot pass phase 1
My list of vpn access increases, so I know that it is correct. IM testing with ping. Debug configurations and follow. Remote location through VPN connection attempt with THE. Thanks to all who can help. His failure in the first phase which means configuration mess up, but I can't find a miss-match for me? Maybe ive been looking at this for a long time.
Pix515e config:
----------------
Crypto ipsec transform-set esp - esp-md5-hmac aptset
aptmap 10 ipsec-isakmp crypto map
aptmap 10 correspondence address vpn crypto card
card crypto aptmap 10 peers set yyy.xxx.xxx.131
card crypto aptmap 10 transform-set aptset
aptmap interface card crypto outside
ISAKMP allows outside
ISAKMP key * address yyy.xxx.xxx.131 netmask 255.255.255.255
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Debugs ipsec, isakmp, ca
-------------------------
Peer VPN: ISAKMP: approved new addition: ip:yyy.xxx.xxx.131 Total VPN peer: 1
Peer VPN: ISAKMP: ip:yyy.xxx.xxx.131 Ref cnt is incremented to peers: 1 Total peer VPN: 1
ISAKMP (0): early changes of Main Mode
ISAKMP (0): retransmission of phase 1... IPSEC (key_engine): request timer shot: count = 1,.
local (identity) = zzz.xxx.xxx.226, distance = yyy.xxx.xxx.131,
local_proxy = 192.168.33.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.65.0/255.255.255.0/0/0 (type = 4)
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): delete SA: src zzz.xxx.xxx.226 dst yyy.xxx.xxx.131
ISADB: Reaper checking HIS 0x81377ad8, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: ip:yyy.xxx.xxx.131 Ref cnt decremented to peers: 0 Total of VPN peer: 1
Peer VPN: ISAKMP: deleted peer: ip:yyy.xxx.xxx.131 VPN peer Total: 0
results of ' show crypto isamkp his. "
-----------------------------------
Total: 1
Embryonic: 1
Src DST in the meantime created State
YYY.xxx.xxx.131 zzz.xxx.xxx.226 MM_NO_STATE 0 0
Error messages on the concentrator 3005
------------------------------------
11:14:47.640 57 07/01/2004-SEV = 4 RPT IKE/48 = 23 yyy.xxx.xxx.226
Support useful treatment of error: ID payload: 1
11:15:02.770 58 07/01/2004-SEV = 4 RPT IKE/48 = 24 yyy.xxx.xxx.226
Support useful treatment of error: ID payload: 1
3005 page concentrator Lan-To-Lan settings
-----------------------
Activated
External interface
Answer only
YYY.xxx.xxx.226 peer
Digital cert: no (use preshared keys)
Transmission of the CERT: (full certification chain)
Preshared key: {same on pix}
AUTH: esp, md5, hmac-128
encryption: des-56
proposal of IKE: IKE-DES-MD5
Filter: none
IPSec NAT - T not verified
No bandwidth policy
Routing: no
I noticed that you have a lifetime and a pfs group configured on the pix. The pfs group is 2 which I think will not work with-although I'm not positive, as I have only used with 3des. Diffie-Hellman Group1 should work with simple.
In any case, recheck the config vpn 3000 to see if a group and life expectancy have been speced on config. If not, or if you are not sure, then remove the two outside the pix and run the command of his clear cry on the pix. Then try again and let me know what you find.
-
Problem of process ISAKMP Tunnel VPN
I configured two tunnels of the separate two PIX to a Cisco 3000 Concentrator.
The settings on the two PIX on ISAKMP polocies and transformation-games are the same. However, establishes a single tunnel, and the other fails.
I think the problem is at the end of 3000, but I am unable to prove it, that I do not have access.
The PIX with the tunnel telling the following debug output (debug crypto isakmp, debug crypto ipsec). The reason the SA is deleted mentions the 3000 having a bad set transformation in politics?
DEBUG OUTPUT
============
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block:src:62.25.99.51, dest:195.188.216.195 spt:500 dpt:50
0
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 4 against 23 priority policy
ISAKMP: 3DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0 x 0 0 x 1 0 x 51 0x80
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:62.25.99.51, dest:195.188.216.195 spt:500 dpt:50
0
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): provider v6 code received xauth
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing another box of IOS!
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing a VPN3000 concentrator
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 500
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:62.25.99.51, dest:195.188.216.195 spt:500 dpt:50
0
Exchange OAK_MM
ISAKMP (0): processing ID payload. Message ID = 0
ISAKMP (0): HASH payload processing. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): Peer Remote supports dead peer detection
ISAKMP (0): SA has been authenticated.
ISAKMP (0): start Quick Mode Exchange, M - ID-1619388538:9f7a1786IPSEC (key
_engine): got an event from the queue.
IPSec (spi_response): spi 0x22a0e9d5 graduation (580970965) for SA
from 62.25.99.51 to 195.188.216.195 for prot 3
to return to the State is IKMP_NO_ERROR
ISAKMP (0): send to notify INITIAL_CONTACT
ISAKMP (0): sending message 24578 NOTIFY 1 protocol
Peer VPN: ISAKMP: approved new addition: ip:62.25.99.51/500 Total VPN peer: 1
Peer VPN: ISAKMP: ip:62.25.99.51/500 Ref cnt is incremented to peers: 1 Total VPN EEP
RS: 1
crypto_isakmp_process_block:src:62.25.99.51, dest:195.188.216.195 spt:500 dpt:50
0
ISAKMP (0): processing DELETE payload. Message ID = 4188403644, spi size = 16
ISAKMP (0): delete SA: src 195.188.216.195 dst 62.25.99.51
to return to the State is IKMP_NO_ERR_NO_TRANS
ISADB: Reaper checking HIS 0xe97afc, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: ip:62.25.99.51/500 Ref cnt decremented to peers: 0 Total of VPN EEP
RS: 1
Peer VPN: ISAKMP: deleted peer: ip:62.25.99.51/500 VPN peer Total: 0IPSEC (key_en
(Origin): had an event of the queue...
IPSec (key_engine_delete_sas): rec would remove the ISAKMP notify
IPSec (key_engine_delete_sas): remove all SAs shared with 62.25.99.51
Any help is appreciated!
Thank you
Neil
It seems that phase as 1 (ike) sa is be created without error. I think that the problem lies in the phase 2 (ipsec) his. Can you put the cryptographic cards relevant and ACLs cards referring to the PIX that fails and the pix who succeeds? That may give a clue as to what is the question.
-
Problems with site-to-site vpn
Hello world
I recently received the mission assigned to the site to site vpn configuration and this is my first time. I'm trying to set up a vpn with pix 501 but short questions site. I managed to get that below, but I'm stuck now and do not know what could be the problem. Here's the debug output.
Any help is greatly appreciated on what could be the potential problem.
-AK
ISAKMP (0:0): sending of NAT - T vendor ID - rev 2 & 3
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:500
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
ISAKMP: 3DES-CBC encryption
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: duration of life (basic) of 28800
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): load useful treatment vendor idISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
00
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): provider v6 code received xauth
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing another box of IOS!
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing a VPN3000 concentrator
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 0
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
00
Exchange OAK_MM
ISAKMP (0): processing ID payload. Message ID = 0
ISAKMP (0): HASH payload processing. Message ID = 0
ISAKMP (0): keep treatment alive: proposal = 32767/32767 sec., real = 3276/2 sec.ISAKMP (0): load useful treatment vendor id
ISAKMP (0): Peer Remote supports dead peer detection
ISAKMP (0): SA has been authenticated.
ISAKMP (0): start Quick Mode changes, 413131006:189fe0feIPSEC (key_e M - ID
(Display): had an event of the queue...
IPSec (spi_response): spi 0x3e9451fa graduation (1049907706) for SA
from 208.249.117.203 to 70.91.20.245 for prot 3to return to the State is IKMP_NO_ERROR
ISAKMP (0): send to notify INITIAL_CONTACT
ISAKMP (0): sending message 24578 NOTIFY 1 protocol
Peer VPN: ISAKMP: approved new addition: ip:208.249.117.203/500 Total VPN peer: 1
Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt is incremented to peers: 1 Total VPN
Peers: 1
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
00
ISAKMP (0): processing DELETE payload. Message ID = 3425658127, spi size = 16
ISAKMP (0): delete SA: src 70.91.20.245 dst 208.249.117.203
to return to the State is IKMP_NO_ERR_NO_TRANS
ISADB: Reaper checking HIS 0xac149c, id_conn = 0 DELETE IT!Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt decremented to peers: 0 Total VPN
Peers: 1
Peer VPN: ISAKMP: deleted peer: ip:208.249.117.203/500 VPN peer Total: 0IPSEC (ke
y_engine): got an event from the queue.
IPSec (key_engine_delete_sas): rec would remove the ISAKMP notify
IPSec (key_engine_delete_sas): remove all SAs shared with 208.249.117.203
IPSec (key_engine): request timer shot: count = 2,.
local (identity) = 70.91.20.245, distance = 208.249.117.203.
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)Hello
Newspapers, I see you are using a VPN 3000 Concentrator as the remote vpn end point. Now, also of the debugs next section is interesting:
local (identity) = 70.91.20.245, distance = 208.249.117.203.
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)-Looks like our traffic interesting PIX and the hub are not mirrors of each other, and does not. Can you please paste the PIX here cryptographic access lists, so that I can analyze the entries.
-Also, please make sure that you have followed all the steps during the vpn configuration according to the following links:
If your PIX is running at version 7.x and more: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008064a06f.shtml
If your PIX is running version 6.3.x: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml
Once you check the config on PIX and concentrator, please provide me with the output of "sh cry isa his" and "sh cry ipsec his ' of the PIX. With this release, we can continue to troubleshoot if there is more questions.
Let me know if this can help,
See you soon,.
Christian V
-
AnyConnect VPN for Cisco ASA 5505 refused connections
I'm trying to set up my Cisco 5505 with AnyConnect VPN client VPN access. Here is the relevant information of my config:
interface Vlan2
mac-address xxxx.xxxx.xxxx
nameif outside
security-level 0
ip address A.A.A.A 255.255.255.240
!
access-list outside_access_in extended permit tcp any host C.C.C.C eq pptp
access-list outside_access_in extended permit tcp any host C.C.C.C eq https
access-list outside_access_in extended permit tcp any host C.C.C.C eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq https
access-list outside_access_in extended permit tcp any host C.C.C.D eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq www
access-list outside_access_in extended permit tcp any host C.C.C.C eq smtp
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host C.C.C.D eq ssh
access-list outside_access_in extended permit tcp any host C.C.C.D eq 8080
access-list outside_access_in extended permit gre any host C.C.C.C
access-list outside_access_out extended permit ip any any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any interface outside
access-list inside_access_out extended permit ip any anyaccess-group inside_access_in in interface inside
access-group inside_access_out out interface inside
access-group outside_access_in in interface outside
access-group outside_access_out out interface outsidewebvpn
enable inside
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enablegroup-policy DfltGrpPolicy attributes
dns-server value X.X.X.X
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
address-pools value palm
webvpn
svc rekey time 30
svc rekey method ssl
svc ask enable default webvpnpolicy-map global_policy
class inspection_default
inspect pptp
inspect http
inspect icmp
inspect ftp
!When I try to connect, I get this error in the real-time log viewer:
TCP access denied by ACL from X.X.X.X/57356 to outside:A.A.A.A/443
Here are the details of the license:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 2
Total VPN Peers : 10
Dual ISPs : Disabled
VLAN Trunk Ports : 0
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : DisabledThis platform has a Base license.
Can someone tell me what I am doing wrong or what access list I'm missing?
I have two Cisco ASA 5510 firewall with a similar setup configuration and the AnyConnect SSL VPN works great.
Hi Matt,
You are probably landing on the tunnel-group by default - you will need to indicate which group to connect to the client. This can be done in different ways - I see that you already have a defined group aliases, but to be able to use that you must configure:
WebVPN
tunnel-group-list activate
Alternatively, if you have only a single group, you can add 'group-url https://yourasa.yourcompany.com/ permit' to the webvpn attributes tunnel-group.
HTH
Herbert
-
Terminology VPN licenses makes me crazy
Sorry if this question has been postponed, probably several times, but I simply can't have my head wrapped around the SSL VPN license thing. The documentation uses terminology that does match the output of the SHOW VERSION, at least not that I can see.
So, I have an ASA 5520. We ordered it added 100 SSLVPN licenses. Here is the output appropriate to see THE VERSION
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 150
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
VPN SSL counterparts: 100
Total of the VPN peers: 750
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes an ASA 5520 VPN Plus license
So should what license I, exactly? AnyConnect Essentials is disabled, so it leads me to believe that I have a form any of premium Anyconect (it does not SAY that, he said only: 'VPN PLUS'). Cisco.com looking for part number ASA5520-VPN-PL =, which is the ASA 5520 with the VPN Plus license (without the user SSL 100 Add in) gets me squat. If I do not have a form of "premium anyconnect", why is it SAID that somewhere, instead of saying "this isn't anyconnect essentials, and you do not have these other advanced features?
I'll try to find a copy of our original order, which will show me all the part numbers, we bought, but I'm afraid that won't do me much good because it doesn't seem to be a comparative table of the licenses and features that maps the old method of doing things for example WEBVPN) to the new method ("ANYCONNECT").
Is the answer poking me in the eyes and I'm simply not noticing?
Any help appreciated!
Jim
The worm out pre 8.4 code HS has been confusing for many. You currently have an AnyConnect Premium license that gives you full access to all features SSL AnyConnect VPN, clientless WebVPN, Cisco Secure Desktop, etc. Your current license will allow 100 concurrent sessions or WebVPN clientless SSL VPN AnyConnect. With 8.4, the worm out sh was changed to give you a more realistic licensing real you have enabled. Here is an example of output from one of my ASAs lab for your reference.
The devices allowed for this platform:
The maximum physical Interfaces: 8 perpetual
VLAN: 3 restricted DMZ
Double ISP: Disabled perpetual
Junction VIRTUAL LAN ports: perpetual 0
The hosts on the inside: 10 perpetual
Failover: Disabled perpetual
VPN - A: enabled perpetual
VPN-3DES-AES: activated perpetual
AnyConnect Premium peers: 2 perpetual
AnyConnect Essentials: Disabled perpetual
Counterparts in other VPNS: 10 perpetual
Total VPN counterparts: 25 perpetual
Shared license: disabled perpetual
AnyConnect for Mobile: disabled perpetual
AnyConnect Cisco VPN phone: disabled perpetual
Assessment of Advanced endpoint: disabled perpetual
Proxy UC phone sessions: 2 perpetual
Proxy total UC sessions: 2 perpetual
Botnet traffic filter: disabled perpetual
Intercompany Media Engine: Disabled perpetual
This platform includes a basic license.
-
I'm having a terrible time linking two Site to Site VPN PIX. I don't spin all VPN Clients, nor will I in the future. When I start debugging on the VPN connection, it gives me this result:
Peer VPN: ISAKMP: approved new addition: ip:xxx.xxx.xxx.3 Total VPN peer: 1
Peer VPN: ISAKMP: ip:xxx.xxx.xxx.3 Ref cnt is incremented to peers: 1 Total peer VPN: 1
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block: CBC xxx.xxx.xxx.3, dest xxx.xxx.xxx.246
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10
ISAKMP: DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0 x 0 0 x 1 0 x 51 0x80
ISAKMP (0): atts are not acceptable. Next payload is 0
ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
ISAKMP: DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0 x 0 0 x 1 0 x 51 0x80
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block: CBC xxx.xxx.xxx.3, dest xxx.xxx.xxx.246
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): provider v6 code received xauth
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): Peer Remote supports dead peer detection
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing another box of IOS!
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 500
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
ISAKMP (0): retransmission of phase 1... IPSEC (key_engine): request timer shot: count = 1,.
local (identity) = xxx.xxx.xxx.246, distance = xxx.xxx.xxx.3,
local_proxy = 192.168.0.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 10.1.1.0/255.255.255.0/0/0 (type = 4)
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): delete SA: src xxx.xxx.xxx.246 dst xxx.xxx.xxx.3
ISADB: Reaper checking HIS 0x814265e8, id_conn = 0 DELETE IT!
If I run an isakmp crypto see the his
Total: 1
Embryonic: 1
Src DST in the meantime created State
xxx.xxx.xxx.3 xxx.xxx.xxx.246 MM_KEY_EXCH 0 0
He won't let the State (other than to take down the tunnel) MM_KEY_EXCH. I'm positive 99% that correspond to public keys. Is there something else that could cause it to give the MM_KEY_EXCH message and do not create the tunnel? Public keys are case-sensitive? What is the message of "talking with another box of IOS"? Here is a copy of the configuration:
name 192.168.0.0 vpn
permit access ip 10.0.0.0 list inside_outbound_nat0_acl 255.0.0.0 255.255.0.0 vpn
permit access ip 10.0.0.0 list outside_cryptomap_20 255.0.0.0 255.255.0.0 vpn
NAT (inside) 0-list of access inside_outbound_nat0_acl
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set xxx.xxx.xxx.246
outside_map card crypto 20 the transform-set ESP-DES-MD5 value
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * address xxx.xxx.xxx.246 netmask 255.255.255.255 No.-xauth-no-config-mode
part of pre authentication ISAKMP policy 20
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Any help would be greatly appreciated.
Daryl,
You can post a new ISAKMP debug output. You can test the remote peer? Don't you see the on the ACL crypto access numbers? You will see the 'talk to another box of IOS' on output debugging because the two boxes are running IOS - this isn't a mistake!
Let me know-
Jay
-
Community support,
I want to run this question by you guys to avoid the sales of our partner CISCO and similar pitch more to the best solution that would give us what we want.
We currently have a VPN from CISCO 3020 hub to terminate the Lan-to-Lan tunnels and have our mobile workers to connect through the client VPN CISCO (300 users-employees and contractors).
Given that this device is coming to an end of LIFE this year, we bought a CISCO 5520 (here is the current licenses in this topic)
Licensing seems quite complicated, so here's my question:
-What VPN do you recommend for our users and entrepreneurs? I understand that the CISCO VPN client does not work with ASA 5500 Series devices
Is there a license needed to deploy a VPN solution for our remote users(employees/contractors)?
Thank you
John
The devices allowed for this platform:
The maximum physical Interfaces: unlimited perpetual
VLAN maximum: 150 perpetual
Guests of the Interior: perpetual unlimited
Failover: Active/active perpetual
VPN - A: enabled perpetual
VPN-3DES-AES: activated perpetual
Security contexts: 2 perpetual
GTP/GPRS: Disabled perpetual
AnyConnect Premium peers: 2 perpetual
AnyConnect Essentials: Disabled perpetual
Counterparts in other VPNS: 750 perpetual
Total VPN counterparts: 750 perpetual
Shared license: disabled perpetual
AnyConnect for Mobile: disabled perpetual
AnyConnect Cisco VPN phone: disabled perpetual
Assessment of Advanced endpoint: disabled perpetual
Proxy UC phone sessions: 2 perpetual
Proxy total UC sessions: 2 perpetual
Botnet traffic filter: disabled perpetual
Intercompany Media Engine: Disabled perpetualThis platform includes an ASA 5520 VPN Plus license.
Your understanding that the Cisco VPN client does not work with ASA is wrong. Maybe it's the version of Cisco VPN client that you use currently does not work with ASA. But these (and so not very new indeed) versions of VPN client work with the ASA. I installed for several clients who use the traditional IPSec VPN client with ASA ASAs and they work well.
You are right that the granting of licenses for the SAA is complicated. Your tunnels IPSec VPN site-to-site will work on the SAA and pose much challenge in terms of licenses. But there are problems and alternative solutions to consider for remote access VPN clients. At this point, there are two major variants: you can use the classic IPSec VPN client or you can use the new AnyConnect client. From a licensing perspective there is a Hugh difference between them. It is not special license that applies to the traditional IPSec client and they are just against your license for peers Total VPN (for which you have 750 in your license). For the AnyConect there is a condition of licence. There is a premium for AnyConnect license and there are licensed AnyConnect Essentials. The Essentials license price is much lower than the premium license, but Essentials does not all the features that made the premium.
In the immediate future, that it would sound like an easy question to answer, use the traditional IPSec VPN client for which theere is not a special permit and it is what you are used to. However Cisco has announced the dates of end of sale and end of Support for the traditional VPN client. If at some point you will need to use the AnyConnect client. I would say that if you make the change of the ASA that it might be a good choice to also adopt the AnyConnect client.
HTH
Rick
-
iPhone 6s won't connect to VPN on work wifi but goes on other wifi networks
Hello
I have been connected to my wifi to work for a while and had to use a VPN to use things such as whats'app and access to sites like Facebook. It worked well until what recently just VPN logs not when I am connected to this wifi network. I know that the password etc and I get the symbol wifi at the top of my phone but never impossible to access Web sites (which was normal, but the VPN it fixed), but now I can not connect the VPN even more.
The VPN application I use is Betternet but I've also tried a few others, none works. However, they all work when I connect to my own wifi network.
iPhone 6 s - last version of iOS from today (28 Apr 16) cannot find the exact version on my phone
Pleaseeeeee help me connect to my VPN when I'm on my work wifi
VPN can be difficult, maybe to consult Betternet. Also see this article for suggestions.
iOS: setting up VPN - Apple Support
FWIW here are some general recommendations for Wi - Fi problems, maybe one of them will help you.
(1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.
(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.
(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).
(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4
(5) disable the prioritization of device on the router if this feature is available.
(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).
(7) try the device on another network, i.e., neighbors, the public coffee house, etc.
(8) to restore the device (ask for more details if you wish).
https://support.Apple.com/en-us/HT201252
(9) go to the Apple Store for the evaluation of the material.
-
How much max VPN session is my ASA
This is my version to see the ASA5512 VPN
"Other peers VPN: 250" means that I can use 250 IPSEC session? If I still use MAX 250 VPN Cisco AnyConnect Secure Mobility Client session?
"Total peer VPN: 250" means that I can use 2 Anyconnect premium + 248 250 IPSEC or IPSEC session at the same time?"AnyConnect for Mobile: Disabled" means, I can't use AnyConnect Secure mobility Client (smartphone apps) connect to the ASA by AnyConnect SSL? Can I use AnyConnect secure mobility Client (smartphone apps) connect to the ASA by IPSEC?
The devices allowed for this platform:
The maximum physical Interfaces: unlimited perpetual
VLAN maximum: 100 perpetual
Guests of the Interior: perpetual unlimited
Failover: Active/active perpetual
Encryption - A: enabled perpetual
AES-3DES-Encryption: activated perpetual
Security contexts: 2 perpetual
GTP/GPRS: Disabled perpetual
AnyConnect Premium peers: 2 perpetual
AnyConnect Essentials: Disabled perpetual
Counterparts in other VPNS: 250 perpetual
Total VPN counterparts: 250 perpetual
Shared license: disabled perpetual
AnyConnect for Mobile: disabled perpetual
AnyConnect Cisco VPN phone: disabled perpetual
Assessment of Advanced endpoint: disabled perpetual
Proxy UC phone sessions: 2 perpetual
Proxy total UC sessions: 2 perpetual
Botnet traffic filter: disabled perpetual
Intercompany Media Engine: Disabled perpetual
The IPS Module: Disabled perpetual
Cluster: Disabled perpetualTHX
Hello!
ASA5512 can contain up to 250 concurrent VPN of any type: IPsec Site to Site or IPsec Remote access or Anyconnect SSL VPN or IPsec IKEv2, or even without VPN client.
This means you can use 2 Anyconnect premium + 248 IPSEC VPN from Site to Site. Or, for example, 200 simultaneous IPsec Site to Site VPN + 25 Client VPN (IPsec IKEv1) + 25 AnyConnect VPN (SSL or IPsec IKE v2). But not more than 250 and then at the same time.
"AnyConnect for Mobile" is now obsolete. The license for Anyconnect schema was changed in early 2015. You can see the new pattern here:
http://www.Cisco.com/c/dam/en/us/products/security/AnyConnect-og.PDF
With the new scheme, if you need to connect mobile devices (iOS, Android and so on), using the Anyconnect client, you just need to have a license Anyconnect MORE for the necessary amount of users/devices. License AnyConnect more open along the lines in the output of the show version:
AnyConnect Premium Peers : 250 perpetual
AnyConnect for Mobile : Enabled perpetualAnyConnect for Cisco VPN Phone : Enabled perpetualAdvanced Endpoint Assessment : Enabled perpetual
But, despite the exit "AnyConnect peers Premium: 250 perpetual", you will have the right to use no more then amount ordered... If you need advanced features, for example, Suite B cryptography or VPN without customer, you must order license Anyconnect Apex for amount of users/devices needed. For ASA5512, you need to order licenses Anyconnect more or Apex, but no more so for 250 users, because ASA5512 can't take no more then 250 simultaneous connections. If you want to use the Anyconnect client for mobile devices and you use IPsec IKEv2 for VPN, you will also need order licenses Anyconnect more or Apex. I hope this helps.
Maybe you are looking for
-
Hello One of my systems uses the default batch process template and creates a new report for each object to be measured. I do not use the fly declaration and for the sake of argument that I use the standard XML generation with the horizontal.xsl styl
-
I use a new laptop running Windows 7. When I start it, I get a dialog box with the following message: ? GetUIGradientEx@@YGABUGRADIENTEX@@PBD@Z is not found in the library of dynamic links NewUI.dll Does anyone know how to fix this please?
-
HelloUnfortunately, I am Labviewanfanger, I ask your help and we hope that you will help me.I need to create a table using the loop, the elements of the array must be monotone increasing so by 1, it must match the size of array, the number of loop cu
-
I was back up files to a flash drive and clicked on 'Move' rather than 'Copy' and all my favorites have been moved to my flash drive. I was not able to restore them or copy them to the Favorites folder. Any suggestions?
-
the Device Manager shows two processors
My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I tre