the Device Manager shows two processors

Similar Questions

• Device Manager shows two different processors on Satellite P200 - 1 K 9

  Hello
  I just bought P200 - 1 K 9 and spotted (Vista 32-bit) Device Manager shows two different processors under the section of processors:

  Intel Core 2 Duo CPU T7300 @ 2.00GHz
  Intel Core 2 Duo T7700 @ 2.40 GHz CPU

  I expected to see the two excatly the same processors here.

  Vista recognizes in general CPU core 2 duo 2.4 GHz, BIOS too.
  What is on the Device Manager?

  Is there something wrong with the CPU? Should I return it better?
  Would you please check your processor in Device Manager (start-> right click on computer-> select Properties-> Device Manager) and let me know what you have?

  I'll start some live linux CD and check there too.

  Thank you
  Miroslaw

  Hi mate,

  the you´ve got problem is not a problem. It s just a simple bug in the Vista Device Manager and hardware abstraction layer.
  Follow these steps:
  Remove the CPU from the Device Manager (uninstall just like any other device) and then restart windows. The processor will be indicated correctly next time you reboot the system.

  Welcome them

• Satellite P300D-150 - Device Manager shows two graphics cards

  Have a P300D-150 shows of two graphics cards in Device Manager: Radeon 3200 and standard VGA
  While I installed the ati display drivers

  Why is this and how can I solve this problem?

  Thanks in advance

  Hey Buddy

  This isn't a question or a problem. It s a fact!
  My U400 has two inputs for Mobile Intel 965 graphics cards.

  I put t know the reason for this, but there s nothing wrong with the laptop ;)

  See you soon

• Device Manager shows no device, is empty

  My 8200 Dell under XP Professional SP3 shows not all devices in Device Manager.  I think that it started very recently when I was installing TM Internet Security after the removal of Norton Anti Virus 2009.  Eventually after using Norton Removal Tool. It doesn't show the devices safe.  Plug and Play is on.  I recently installed an old HP DeskJet 820Cse printer using existing drivers.  I do not think that article 953979 applies since it just (seem), took place but it seems to fit the description.  Any help is appreciated.

  There is a Microsoft 953979 patch that works, but it didn't on mine, I then found this articale and followed the instructions and it worked.

  (1) logged as an administrator;
  (2) Regedit > HKLM\SYSTEM\CURRENTCONTROLSET\ENUM.
  (3) right clicked Enum and gives right to the system and administrators full control.
  (4) clicked the button Options at the bottom of the window.
  (5) on the Advanced window checked 'reset permissions on all child objects... ". »
  (6) the deleted Enum key. Error message: error while deleting key. I had to remove this key twice because initially, it appeared the remains of Enum key. After that, the locked ENUM\ROOT\LEGACY_SSDPSRV who already had a lot of weird symbols example $% &' () * +-, etc., now gone. Registry shows an own ENUM\ROOT subkey.
  (7) PC rebooted and back connected to Windows;
  (8) window of the Device Manager showed some yellow exclamation not to mention that some devices not recognized, then refreshed a few times showing successively less then not many of these features.
  (9) PC rebooted again;
  (10) message screen saying according to Windows has finished installing new devices, and the computer must be restarted before the new settings take effect.
  11) Yes to restart the computer

  Now the Device Manager window is full and all devices running again!

  This solution works for my situation. I hope this helps someone.

• S10 - 2 showing two processor in speedfan and Device Manager.

  Mr President, I recently noticed that my netbook S10-2, showing two processors in device (xp sp3) management. Speedfan also showing that two basic (even temperature, even its use for both). Is it possible that my netbook not have double heart but two core processor. Or it's just a bug. My netbook is Intel Atom n280, intel gma 950, 1 GB ram, 160 GB hard drive. I want to upgrade to Windows 7 Ultimate edition 32 bit. If it will run smoothly or not? I don't want to move my ram to 2 GB. Thank you.

  Hello..

  (1) if it is possible to reduce the video memory through the bios?

  No use of chipset intel grafics vary on request 8 MB - 224

  (2) can we install any os on S10 - 2 through its card reader internal memory (for the particular operating system Starter memory card)? or I have to use a flash drive? You can use almost all the 32-Bit operating system... A vast Distris Linux, Windows XP/Vista/Windows 7... I prefer via flashthumbdrive...

  (3) and a practical question to my knowledge, how many hours in a day I can keep my S10-2 on battery or plugged? If you want to use the machine, most of the time connected...

  then remove the battery (to save the life of the cells).

  I used my S10e on 72 continuous hours running... without. the quirks... plugged...

  cordially KalvinKlein

• Why two different CPU in the Device Manager in Satellite P100?

  Poster my Core 2 Duo, as Device Manager:

  a T7200 2 .00GHz
  a T7600 2.33 GHz

  Please can someone explain what this means?

  Arjen.

  Because it s a Core 2 Duo CPU and the Windows OS shows two separate CPU cores.
  Don t, everything looks ok ;)

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

• Satellite A100-1AI watch CD player but Device Manager shows the DVD player

  I own a Satellite A100-1AI and went from Vista to Windows XP?

  My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

  Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

  Since the switch from Vista to XP I have not adjusted my BIOS settings

  How can I make my DVD see CD and erase those unknown devices

  Thanks in advance

  Spon

  Just a question;
  You can read and burn CDs?

  Regarding the unknown devices:
  These devices are only compatible Vista and so there is no drivers for the mass storage controller.

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

  _Solution: _
  + This unit is probably the module of Robson former Turbo Memory. +
  + This hardware will only supported by Windows Vista. +
  + That is why there is no Windows XP drivers. +

  Greetigns

• The Windows Task Manager shows two instances of HpqPhUnl.exe running under XP

  My windows Task Manager shows two instances of HpqPhUnl.exe Runnung.

  * original title - why do I have two HpqPhUnl.exe race? *

  Are you using the quick change of user with more than one user connected and are both instances of HpqPhUnl.exe running under different user names?

  Although it is always possible for malware to masquerade as a legitimate file, HpqPhUnl.exe is related to the HP Photosmart Essential software provided with printers HP all-in-one.

  It seems there were several problems with Photosmart Essential and HP has replaced with HP Photo Creations.  HP claims, however, that he "supports" always Photosmart Essential.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02475046&lc=en&dlc=en&cc=us&product=3857372

  If you have any problems and you're just curious, I suggest you leave the pretty well after scanning with the following just in case two free tools:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If you experience problems with your HP software - and the scans do not present any malware - I suggest to ask in the forums HP (there are 3: consumer, Business and IT resources.)

• Ethernet adapter is not showing in the Device Manager

  

  I have a vastro 460 with i3 with intel and Windows 7 32 bit. try to install the driver for the network card, but does not. Ping works but do not show in the Device Manager.

  Any help will be much appreciated

  Hi EMH.

  You will need to install the Chipset Drivers first and later network adapter drivers. The IP address that you have ping is the local host and works, even when there is no network card detected.

  Please download and install the NIC in the network section and the section Chipset Chipset drivers from the following link, by drilling in the serial number:
  http://Dell.to/QjjZDA

  Please let me know if you need more assistance.

• Realtek NIC does not show in the Device Manager - until a hardware scan is done

  A few months ago, I purchased a dv6 3240us and not downgraded to XP Pro win7 no problem, everything has been installed - everything I tried worked fine without any problem at all. I do not use this computer on the Internet - but I got the opportunity to connect the NETWORK card to a piece of equipment, I was working on that. When I went to change the IP address of the laptop - no local NIC (supposed to be Realtek) present in the Device Manager.  I installed the driver when I went down to XP without error.  I can only see the wireless adapter and it also shows on the system tray. When I right click on network adapters in Manager devices and do a scan for the hardware - the Realtek card is? and now everything works fine until I stop, then I have to go the process again. I watched the Realtek driver and he says its all working properly - any suggestions?

  Hello:

  I'm not familiar with the BIOS settings too consumer laptop, but see if there is a setting for a LAN Power Save Mode - maybe in the configuration menu of the device.

  On HP Business laptops, there is such a context, and the default value is enabled. What is this setting is to remove the wired NETWORK card at least that the PC is plugged in and connected to a LAN cable. This saves battery power.

  They also have a LAN/WLAN definition switch that disables the NETWORK adapter when the other is in use. For example, if I plug a wire to my Wired NETWORK card, my wireless NETWORK card is automatically disabled.

  If you have such a LAN Power Save setting, turn it off, and your NETWORK card must always be visible in Device Manager.

  Paul

• How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

  I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
  I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

  Hello

   
   
  1. What is the code that you see under the status of the device and the exact error message?
  2 have you made changes on the computer before this problem?
  As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
  Step 1: first of all, I would say you temporarily disable any security software and then try to install.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Step 2: Now try to install the drivers
  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. identify the sound card, right-click on it and select Properties .
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
  Restart the computer and install the latest driver.
  Reference: Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  Overview of Teredo

  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

   

   

• Satellite A100-797: Vista Device Manager show different CPU speeds

  Hi all

  I had an an A100-797 with Vista Home Premium 32 Bit and I was cruising along the system properties. Via 'Control panel system->' I saw the spec CPU as

  Processor: Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz, 2.00 Ghz

  Then I checked the CPU the Device Manager section, he showed me two CPU

  Intel (r) Core (TM) 2 CPU T5500 @ 1.66 Ghz
  Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz

  Do you think this is normal?

  Hello

  Check this http://support.toshiba-tro.de/kb0/TSB6C01O70000R01.htm

  Good bye

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Windows 8 crashes when running 'find the hardware changes' in the Device Manager, requiring forced stop

  I just installed Windows 8 Pro on a system that were running Windows 7 without problem.  After completing a clean Windows 8 Pro Setup program, I went from hollow driver installation, but found the package to install for my card its caused Windows 8 Pro drivers to lock up and become completely numb.  I had to force a shutdown by pressing the button for 4 seconds.

  Trying to solve the problem, I found that manually install the drivers through the device manager didn't cause any problems.  In addition, installation of the drivers available through Windows Update also worked without problem. However, these two methods fail to install parts of the pilot training included him.  Then I have to uninstall the device from the package of drivers again.  I uninstalled the sound card via Device Manager and selected "Delete the driver for this device."  When I followed this with a "Scan for hardware changes" again the list my sound card, I have found that Windows 8 Hung again.

  After trying other options with no resolution, I tried to reinstall fresh Windows 8.   To exclude a possible problem with Windows 8, I opened Device Manager, as soon as I could after installing Windows and ran "find the hardware changes.  New Windows 8 freezes.  I can't place blame on post installation any software or driver.  This seems to be a problem with Windows 8 itself.

  A final note, sometimes "find the hardware changes" will actually work, but most often it forces the system to hang.

  Does anyone else have this problem?  Can anyone provide assistance? (chart below for comparison)

  Processor: Core i7 3770 k

  Motherboard: MSI Z77A-GD80

  RAM: 16 GB

  Video: GeForce GTX 680

  Audio: Creative Sound Blaster Recon3D

  HARD drive: 1 x Corsair Force SSD 3

  RAID: 3 x 1 TB RAID 5

  It seems that I am victim of dynamic ticks.  Research on my question, I have found several discussions around the ' net for crashes/freezes random in Windows 8, but none of them appeared to agree to my problem.  However, they all had the same solutions.

  Run the following command in a command prompt to disable the dynamic ticks.

  bcdedit/set disabledynamictick Yes

  I thought that I have that would give a shot, and it worked.  I wrote this answer, I also found that there is a recent update of the BIOS for my motherboard which indicates "Support Windows8 feature."  With the new BIOS applied, I was able to turn dynamic ticks and have been broadcast since w/o freezes.  I also managed to install all my drivers.  Anyone else having this problem maybe try updating the motherboard BIOS, otherwise try the above command.