What memory module can work in my Satellite M100-221?

Similar Questions

• Satellite A30 - 151 - what memory module can use?

  Hello

  I have TOSHIBA Satellite A30-151 with 768 MB of DDR1 memory.
  I want to upgrade. What is the best memory that I can buy?

  the card says:
  Max 2 048 MB.

  So, how many slots I? I can buy 2 x 1 Go DDR1-333 memory? Can it be more than 333 then?

  Thank you
  NIR.

  Hello

  It is really an oldie
  As far as I know that you can upgrade the RAM up to 2 GB of RAM
  The bus (FSB) front-end speed seems to support 533 Mhz and that's why you should be able to use the 533 Mhz RAM modules.

  PS: The laptop must support 2 slots of memory if you are able to put 2 x 1 GB RAM

• Satellite M100-221: can I use 2 GB memory module in a slot?

  My Satellite M100-221 currently has 512 MB of memory and I want to bring to 2 GB. Is it possible to expand the memory by adding just a 1 x 2 GB memory in the expansion slot available? Or I have to put a matched module (2 X 1 GB)?

  Hello

  As far as I know it of possible to upgrade the memory to 4 GB max.
  That's why one a bank should be able to handle the module memory of 2GB.

  So it of your choice if you want to use a module of 2 GB or 2 x 1 GB modules.

  Greetings

• How to determine if all memory modules are working properly

  Ref: Pavilion a1102n, Windows XP 32-bit.

  I upgraded my memory from the computer by replacing the 2 existing modules of 256 Meg of origin with 2, 1 Gig modules. This gave me 1.97 GB RAM as shown in Control Panel - System - general.

  Recently, I added 2 more 1 Gig modules. This should bring my computer to the max memory for this product. When I checked as stated above, it shows 3.11 GB of RAM. HP note that, when you add the max memory, the total RAM may be slightly less than 4 GB, but loser 0.89 Gig seems excessive.

  How can I check to see if all 4 memory modules are working properly?

  Thank you.

  SubVetUSN,

  The total is correct. The average is 3.3, according HP link on your device.

• Satellite M100-221 - energy saving does not work - fatal error

  My laptop Satellite M100-221 the energy saver is not woarking. I get this annoying message:
  http://up109.arabsh.com/s/42gi7dkhum.jpg

  I try to reinstall the driver, and towards the end of the installation a message appears:

  C:\Progra~1\Symantec\S32EVNT1. DLL. a virtual device driver installable failed initialization of Dll. choose 'close '? to complete the application.

  Satellite M100-221 belongs to the series of PSMA0E.
  Toshiba page European pilot plans and pilot Power Saver and the Power Saver utility.
  I recommend first of all remove the system energy saver.
  Then after reboot to clean the BONES and the registry using the CCleaner.
  Then, install the driver Power Saver 2.40.0.1C and Power Saver, utility 7.03.07.C

  Good luck

• Satellite M100-221: Solution Possible BSOD / sound + mouse problem

  Hi all!

  Recently my Satellite M100-221 started crashing and freezing, so I reinstalled Windows XP.
  However, some problems are still recurring.
  First, before posting that, I browsed all the forum and found a few questions from people who are experiencing a BSOD (blue screen).

  I solved this problem by removing HWSetup programe of PC (because, as he wrote on the blue screen, its driver was causing a problem).
  All who have this problem should consider all the software Toshiba, because maybe this is the reason.

  However, I have 2 questions.
  First of all, which is my mouse (and touchpad too) just occasionally freezes for a second.
  I tried different mouse - but it's the same thing. (It may not be the connected with the performance of the CPU, because before the re - install XP, I didn't have the problem).

  And secondly is connected with sound - noise from time to time (whether it be the music play or simply 'click' sound effect) freezes just - which makes the periodical "trtrtrttrtr" - like sound))) that the two problems are so boring - because you just can't help the note!

  I've got drivers provided by Toshiba - maybe the problem is with them?
  So should what drivers I expect?

  Please, someone, help!

  I solved the problems and it took almost two days to determine what the problem is.
  Well, I read a lot of discussion on the failures of sounds, mouse freeze and so on. But there is always only one advice: updating drivers, BIOS, etc, etc. After two days, I have updated all the drivers on my laptop, updated the BIOS and fact repeatedly - but all that was * _completely useless_ *.
  I've got Intel Centrino Duo processor - so I started to experiment with a single core enabled - play music and watch videos and watch to the works of the processor. According to the process manager, got processor loaded at 50-60% of its power every 2-4 dry. And it turns out to be Hotkey.exe! Toshiba utility! This means that software of Toshiba's just unnecessary powerful processors, because this software is completely unprofessional. I have nothing against Toshiba - laptops are one of the best, but they should at least try their own software before distributing it with their PC.
  So I guess some problems with your laptop, mates, can be solved by turning off unnecessary all software and utilities Toshiba - just them clear in the automatic boot menu.
  Good luck!

• Cannot install driver LAN on Satellite M100-221

  I have reinstalled the OS on my Satellite M100 - 221 PSMA0E.

  HE has already used Windows XP Home Edition, and now I have installed Windows XP Professional SP2. I have an error in my DEVICE MANAGER with ethernet, mass storage controller, SM bus controller controller. But let's for ETHERNET CONTROLLER.
  I have download the real LAN driver on the official website of Toshiba, and whenever I try to install it I get the message "the specified location contains no information about your hardware.
  In the wizard NETWORK UPADATE I have same option to choose the Realtek driver, only Intel and a few others. My network card was working very well on XP Home edition preinstalled. What am I, I guess what to do? Help, please!

  Hello

  I guess you should try drivers intel instead of the realtek because drivers that your computer was shipped with a chipset Intel LAN.
  So, please visit the website of intel (www.intel.com) and download the latest drivers LAN from their homepage.

  It should work and you should soon have a working ethernet connection.

  Concerning

• Re: Satellite M100-221: screen turns black, moving display

  Hello

  I have a problem with the LCD on toshiba satellite M100-221.

  When I move the screen, the screen goes black.

  The display only works correctly when the angle is close to 90 degrees.

  Hey Buddy,

  I m not a technician but I agree with the user above. For me it looks like a hardware problem and you should go to a service provider allowed. Technicians can check your defective parts for computer laptop notebook and Exchange.

  You can search for the nearest Toshiba for ASP site. ;)

• Satellite M100-221 with Win 7 - issue Fn after PVAT site amenities

  Hello

  I installed windows 7 on my toshiba satellite m100-221, with 5.60 bios, I had problems with installing the chipset drivers which I downloaded from the toshiba Web site.
  Finally I downloaded the drivers from the site to intel. I realized that my Fn keys are in operation, but only Fn + ESC, F1, F5, F6, F7.
  So I tried to install PVAT that contains Flash cards.
  Everything seems to work properly, some Flash cards began, I could use them with the mouse, BUT NONE of the Fn keys worked.

  Now, I'll try to uninstall, reinstall, but without success.
  When I disable flash cards at the start that the Fn keys work, when I start it, it seems that Flash Cards takes controll keys Fn and disable them.

  My laptop is able to vista and I also tried to do the same thing with vista, but with the same result, all Fn are disabled when the cards are running.

  It is important for me to use Fn + F8 to switch to the radio wireless and Fn + F4 to Hibernate.

  You have ideas or experience how to fix?

  Thanks for help.

  > So I tried to install PVAT that contains Flash cards

  Win 7 needs the VAP (additional package) and you need to install the additional Flash Card Support utility!
  Win 7 Vientiane does not contain Flash cards! You must install separately.

  Take a look on the Satellite L500 driver area.
  You'll find the VAP and Flash Card Utility for Win7

  I recommend reinstall these two tools again

  Welcome them

• Problem with the display for Satellite M100-221 driver

  In the section of the driver of this site, I can download the display driver for my SATELLITE M100 - 221 (PSMAE0).

  There are Mobile Intel 945 Express Chipset
  For Windows Vista, I can download the dirver:
  17/10/07 display driver Intel Windows Vista 7.14.10.1227

  But for Windows XP driver for ATI chipset:
  21/11/07 Display Driver ATI Windows XP 8.283

  Where can I get display driver for Intel 945 chipset for Windows XP?

  PS: Sorry for my English, I hope you can understand me =)

  Hello

  Recheck the Toshiba download page. It seems that Toshiba has seen your ad here. ;) Driver Intel is now available.

• Satellite M100-221 - PXE boot error message

  Hello

  I own a Toshiba Satellite M100 221 and when I turn it on it says

  PXE e61 media test failure
  Check cable pxe moF output
  Intel boot agent
  operating system not found

  I downloaded a program called Hiren Boot Cd and I he burned on a Cd and then I ran it if the 221 m100, then I loaded Windows XP Mini. I went into my computer and I don't because my partition B called drive Ram Toshiba himself. Where is my C partition? What happened to my PC? I think that the hard disk is dead. Is it?

  Hi lekhB,

  > I think the hard drive is dead. Is it?
  Is that the HARD drive is listed in the BIOS?

  If this isn't the case, it seems that the HARD drive is faulty, but in General, the PXE message means that an incorrect boot order is set.

• Satellite P100-488 - what memory modules that I can use

  Hello

  I want to upgrade my memory from 1 GB to 2 GB, but I can't find the correct specifications for the 1 GB memory current installed on my laptop.

  Indeed, I could only confirm that the frequency is 533 Mhz, but my question is: what type of memory should I use? PC2-4200 or PC2-4300?
  I am unable to find the information of the current type used on this laptop.

  Thanks in advance.

  Hello

  This site of memory should help you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29973&ft=m&St=3

  According to this website of the Satellite P100-488 supports DDR2 667 MHz (PC2-5300) memory modules and you can upgrade it to 4 GB max.

  I hope I could help!

  Greetings

• Re: Satellite Pro M40: what memory modules that I can use

  Hello

  I was hoping someone could point me in the right direction.
  I have a Satellite Pro M40 part number: PSM46E-00H002EN

  I really want to upgrade the memory, but I don't know what to do.
  I know I want two 1 GB ones but I do not know what kind.

  I looked and there seems to be so much of.

  Could someone tell me exactly what I want or give me a link to buy.
  I would be grateful rerally.

  Hello

  I think you should check this page from memory Satellite Pro M40:

  Memory for Toshiba Satellite Pro M40
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26119&ft=m&St=3

  It is said that you could use the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules and you could upgrade the memory up to 2 GB of RAM

  Good bye

• Satellite M100-222 - what memory module is good

  Can please, someone advise me which module of memory is good for above mentioned laptop.

  I would like to upgrade memory of 1 GB to 2 GB

  Hello

  Modules memory Satellite M100-222 supports a 533 MHz DDR2 (PC2-4200)!
  The laptop runs max 4 GB of memory (2 x 2048 MB)

  Check this page he s confirm my info
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=25742&ft=m&St=3

  I hope I could help

• Tecra M4: What memory module?

  I continue to ring the helpdesk and get different answers to which memory I can use. Help, please!

  I want to improve my memory to 2 GB of faster memory, as I can get. You are not sure if the Toshiba mem is the fastest or not? What is the correct specification to buy

  I think that his:
  200Pin SODIMM Pc2-4200 DDR2 533 Mhz

  These are the right products to buy?
  Kingston 1024 MB 533 mhz Ddr2 Sodimm - Pc2-4200 Ecc (KVR533D2S4 / 1 G)
  CORSAIR® Value Select 1 GB PC4200 DDR2 533 MHz (VS1GSDS533D2) 200pin SODIMM

  Hello

  AFAIK you need SODIMM DDR2-RAM PC2-4300 533 MHz.
  The modules of memory Kingston and Corsair, you wrote on, are right.

  Good bye