start-up easier: there is a lost language dock which is not found
When I start my computer, then connect, it says that there is a lost language dock which can not be found. It says that I need to check if the disc correctly or make sure I'm contected to a network. I just connected a wireless Internet, so I do not know if that has something to do with it.
Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all. Search language dock and when you find it uncheck the box to prevent it from start to start. Check the entire list as there may be several entries. When you're done, click OK and restart. The message should be gone.
If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
There is an update of security which will not be installed. It comes back with an error Code 66A. Any ideas?
Hello
wrong forum
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I have an iphone 5 s when I opened the app screen ther place is no icon of the application not found
I have a 5 s 7.1.2 IOS, model MD440LL/A. I do have the App Store icon on the home screen. When to go to the ITunes App & in that updated settings App is turned on. Use also. as cellular data are. Kevin
If you don't see the App Store icon on your home screen, go to settings > general > Restrictions and make sure that if you have Restrictions, that "Facility" and "Suppression" Apps are activated under 'allow '.
See you soon,.
GB
-
I just installed 9 Captivate on my Mac, and it does not recognize the double click of the mouse to enter text in a title area. Subtitle text works, but the text is not title. I work in a reactive mode.
Hi rayhoskins,
We have not encountered such a problem. Can you please clear Captivate preferences and try again. .
Captivate preferences can be erased by double-clicking the following file: Applications\Adobe Captivaate 9\utils\ClearPreferencesMac
If you still face the issue please provide the Machine config?
-Derrick
Captivate the engineering team
-
Error starting of DPS App Builder - Application not found
WTF people.
This morning I opened my document (CS5) and he said that I should update my folio tools (Needless to say I hate it to be forced to do an update before I can start working).
Well, I do an update, these two tools (tools of producer and Folio Builder).
Now, there seems to be a few changes, I can't update my folio via the menu more. At the time to choose the new 'building app' - option I get an error:
"An error occurred when starting of DPS App Builder. The App-Builder DPS application not found"(translated).
Original German version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Wurde die DPS App Builder application non found. »
All Solutions? Where to find the mysterious "Application App-Builder"?
Edit: Refresh is now possible within the folio as it seems.
App Builder is nothing else than a new name to Viewer Builder. Download go DPS.
-
Hello!
I am planing to buy a new laptop computer and found the 710 s-13ISK (80SW003NGE) interesting. There are 5 different configurations, with different processors and amount of memory. The least expensive is the only one that I could afford it, and there the lowest CPU i3-6100U, which is not matter at all, but it has only 4 GB of the DDR3L. I want to buy this one, but only if I am able to upgrade memory one day to 8 GB, where the 4 GB are not enough for my usage scenarios.
Unfortunately I can't find any specific information, whether the mother card features a RAM slot (so the 4 GB might be replaced by greater 8 GB), or memory is soldered directly on the motherboard (it is not replaceable).
Someone has this particular laptop and could give me some feedback on this one?
Thanks much, much in advance!
I found this link to a site with a review on this model and it added to my previous post, and it seems that the RAM is indeed on board and is maxed out at 4 GB
This sheet of sites seems to confirm that the RAM is welded on board.
http://ICEcat.us/us/p/Lenovo/80sw003nge/laptops-notebooks-33134032.html#
-
Failed to start Windows 7, not found Boot Manager?
I have a Sony Vaio VGN-SR26GN with Windows 7 32 bit installed.
He froze, ctrl + alt + delete does not work I turned it works but it was not able to start windows, all I ended up with is a black screen with cursor mobile, even with safe mode.
I tried recovery, known last good configuration, etc... but nothing has worked
Then I started getting the blue screen of death with the BOOT MANAGER NOT FOUND or something of the sort
I tried to use the CD to repair windows 7 but it couldn't detect any installation of windows or another partition... I tried the bootrec different commands but nothing worked
Now when I turn on the computer, it will start the Vaio repair utility, open a blue screen and nothing happens for hours.
I don't know if it is a hardware or software problem. What else can I try to do?
Thank you
Hello
References to Vista also apply to Windows 7.
It is a serious mistake and "may" not be fixable without a professional technical support
a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
Support of the machine system.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/---------------------------------------------------------
This is the troubleshooting methods to try to resolve the problem:
Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
return and then try to startup repair.)How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Try the disk Options recovery or Windows 7 startup repair.
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlRecover the Vista or Windows 7 bootloader from the DVD
http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVDRecovering the Vista Bootloader with EasyBCD (Windows 7)
http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCDFix the Vista Bootloader of Windows (Windows 7)
http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader------------------------------------------------------------
Unable to boot into windows vista-windows boot configuration data file is missing required
information - Repair Corrupt Boot Manager (Windows 7)
http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
problems starting in Windows Vista (Windows 7)
http://support.Microsoft.com/kb/927392How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.htmlError message when you start Windows Vista: "the Windows Boot Configuration data file is.
missing required information"(Windows 7)
http://support.Microsoft.com/kb/927391Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-errorSee this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html=========================================
If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.If you need to repair disks - these help repair Windows not re-install.
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my physical keyboard, so that for example if I type [keyboard I get an e. It is very annoying and makes the keyboard quite useless. Keeping fixed language I would get bad suggested words.
You will need to define your physical layout being the same for English and Italian in settings > general > keyboard > keyboard > keyboard material
-
Hi, I do not know where to turn: the person who takes care of all the stuff of count is out of town, this friend started Firefox and there was a message about an update, I thoght I again just click on install and wait to re start Firefox. But what I remember is this another open window and asked me to choose 'something' (an icon or banner or?), I thought I have to click on an element (I guess I should read all clearly). Firefox updated to 3.6.4, but it also inserted some sort of what might be called a banner? But it does cover only partially the half right of my 3 toolbars at the top of the Firefox window. It cannot be used to something else because it's just a mess of colors and unknowns, except for what looks like a 'top' and what I recognize as an icon of Firefox (but only partially visible)! Now, what he does, it's partly hide this part all the toolbars and they are difficult to read and to do to turn this 'thing' impossible to understand, if I keep to? I can't find in any case to remove it or use it? But since the icon of Firefox is about it, I think you need to know what it is and how trash. I'm sorry for this accident caused my my inattention, but I'm not much of a computer person - HELP! Thanks for any help. Judi
This has happened
Each time Firefox opened
Today is Thrsday June 24, 2010
The only thing I can imagine: it's a character.
Tools-> Add-ons-> Themes
Here should be the character (light theme)
and a button 'delete '.Click on it (delete button), and he (Persona, this mixture of colors) should disappear instantly.
This help you?
-
laptop that I use in another room tends to start tell me there is no internet connection
I installed a router so the other summits of the tour can get interenet and cost me extra. him burp is hooked up to my desktop pc. This is the laptop I use in another room tends to start tell me there is no internet connection? isn't the router suppose t compensate for this? How can I fix
Hello
(1) what is the brand and model of the router and you are using wireless card?
(2) what is you receive the exact error message?
(3) remember you to make changes to the computer before the show?
(4) you are able to access the internet during the connection of the laptop directly to the network?
Please follow the steps mentioned in the link, troubleshooting of connection problems in Windows wireless and wired network:
You can also view the following link, view and connect to available wireless networks:
http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-connect-to-available-wireless-networks
It will be useful.
-
C:\Windows\SysWow64\CScript.exe appears whenever my computer starts. Is there a way to prevent that from happening?
M. Shivkumar, I also encountered this problem, and after following the instructions given by Linney, I've isolated the problem to the boot service "CheckNDISPort", which was linked to the MTS MBlaze program on my computer. It is not a virus, nothing to worry about. You can stop this from happening by disabling the boot service called 'CheckNDISPort' in the tab, start the System Configuration utility. It is not to damage your computer if you keep it checked.
-
I'm thinking there must be a registry fix just for this.
I used to have two sticks of tuner TV USB in my PC (Win7 Home 64 bit), but one of them went belly.
Now when WMC starts a scheduled recording, I have a pop-up balloon reports "Tuner not found". But the TV very well played and recorded normally.
Is there a simple solution for this? Very annoying. THX.
In WMC, go to Settings/tasks/TV Signal and set up your TV Signal again.
WMC has been implemented with 2 tuners and will continue to be a tuner missing until you set up again.
If you replace the missing tuner, or replace it with another tuner, you need to configure WMC again.
-
Original title: run DLL error message
When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found. I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found. I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking. Thanks for your help.
Hello MaureenCYB,
Thank you for the question!
I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.
I need to ask you a question to help you best.
Were there any changes (hardware or software) to the computer before the show?
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: follow step 3 to reset the computer to start as usual after the boot process.
Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't. What seems to be the problem?
Hi Lex % 20Draijer,
You can try the same thing using a different browser.
or you can download Creative Cloud via https://www.adobe.com/creativecloud/desktop-app.html
You can also see help document https://helpx.adobe.com/creative-cloud/help/manage-apps-services-desktop.html
Hope this will help.
-
I downloaded and used a test of Lightroom, several days ago. I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.» How can I go back in my files?
There are a number of options available when you choose to import files to your catalog in Lightroom (library)
1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.
2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)
3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.
The original image file will be located at the location of your choice.
There are no image files in your catalog (or library) file the original files are in the location you choose.
If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.
Maybe you are looking for
-
My C410 stopped scanning and the error says "scanner failure. Restart and try again"it worked very well and stopped. None of my usable machines (win07, winxp or os / X) I cycled power 3 times, on nite and even uninstalled and reinstalled Solutions Ce
-
I bought this pc about three years ago and it is loaded with an oem version. Whenever I have the box to go ahead and activate widows, my pc just sits there with an activation screen blank and never generates the necessary code to continue. What is ha
-
HP mini 311-1000 CA coprocessor driver
Does anyone know what is the coprocessor, and how can I get the drivers win 7 for her. Thank you. HP mini 311-1000 Ca Win 7 Home Premium installed instead of Win XP Message edited by Talquino on 11/27/2009 14:17
-
Hi Im using laserjet p1102w. is it possible to set the parameters of the printer to fastres 300? The options available are only currently 600 and 1200. Thank you.
-
Cisco C60 3 cameras + speaker cable
Hi guys,. Do you know if there is a way to connect 3 cameras + presenter cable simultaneously on CODEC C60?