What small business routers support DHCPipv6-DP?

Similar Questions

• One-to-one NAT and small business routers

  Hello all, can anyone tell me if there is any router for small businesses that offer a NAT?

  Here's what I do: I have several IP addresses public Qwest has given me. I have two servers that provide e-mail and web hosting for two different areas. I want to put the client machines on a LAN VIRTUAL (VLAN Z) and assign a public IP address (to separate traffic from the server). I want to put every server on its own LAN VIRTUAL (VLAN & XY) and assign to each its own public IP address server. I need the router to be able to provide a firewall and port forwarding for each VLAN. I also need to be able to carry traffic between VLANs for VLAN Z customers may access their e-mail and websites on VLANs X and Y. I have also need to be able to send DNS traffic between the VLANS so each server can provide resolution of names for their respective areas.

  So, is this possible with a small business router or I have to watch something different? I am pretty sure that this configuration is not possible with my current Cisco RVS4000. What it boils down to is that I need a router that is able to have multiple public IP addresses on the same interface and pass the public addresses to subnets private VLAN. It would be a NAT, as I understand it... right?

  Any help is greatly appreciated!

  Hi Taylor, please use our forum, my name is Johnnatan and I'm part of the community of support to small businesses. I ve seen your post and I was looking for some devices that could help you, these small business router supports the functionality you were missing, the one-to-one nat, also the routing features, you see the list of routers Rv here

  http://www.Cisco.com/en/us/products/ps9923/products_data_sheets_list.html

  I chose two models that may be useful for you:

  Rv180

  http://www.Cisco.com/en/us/prod/collateral/routers/ps10907/ps9923/ps11995/C78-697397_data_sheet.html

  Rv220

  http://www.Cisco.com/en/us/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html

  I hope you find this answer useful,

  * Please answer question mark or note the fact other users can benefit from the TI *.

  Greetings,

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer.

• Is VLAN via VPN possible with any of the Small Business routers?

  A tagged VLAN (for voice) will be routed through a VPN gateway to gateway on any of the Small Business routers, such as the SA520? This router is equipped

  Parameters of VLAN Trunking.

  No, it is not possible to send traffic to vlan via VPN on a series of SA500, but you can create a tunnel for each subnet, you need to pass traffic.

  hope this helps,

  Jasbryan

• We stil run an extensive system of Small Business Accounting. I wonder what others have opted for now his party and support.

  We stil run an extensive system of Small Business Accounting.  I wonder what others have opted for now his party and support.  We have to find a new solution.  Recommend something?

  Shane

  original title: Small Business Accounting

  Try: QuickBooks

• Is - it possible/supported to join a vCenter Server Appliance for a Small Business Server 2011 Active Directory Windows?

  Hello experts,

  I wonder if it's possible/supported to join the vCenter Server Appliance for a small business 2011 Active Directory Windows Server (basically a Microsoft Windows Server 2008 R2 Active Directory).

  Any help will be greatly appreciated.

  Thank you and best regards,

  Massimiliano

  You can... However, it would be, at least in what we saw, more easy to reach the device in the announcement via the CLI

  http://KB.VMware.com/kb/2002626

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• What kind of material I have to put in place a network of small business?

  you have a small business with 4 desktop systems and 2 laptops mobile network. you want all of their network. What haredware would need to connect desktop computers and laptops to another so that they can share information?

  Each computer will need a wired or wireless adapter. Depending on what cards you choose / have you'll need a router wireless and wired.

  Since you have a laptop I guess they already have wireless adapters. In this case, you would want a wireless router. In my view, 802.11n, n being the important part, is the last great in the wireless.

• What is 'Next Business Day Support'?

  Hello

  I would like to know what it means 'Next Business Day Support'. Does this 'day business on-site"identical or something else?

  For the moment, I'm interested a Latitude Dell laptop refurbished on the ebay.co.uk and the portable real is in the United States. The inscription says that there 3 years manufacturer's Dell warranty. When I asked the seller to this topic, what I are unclear responses.

   

  "The way in which the guarantee was designed by Dell is that it must be registered using a USA based address."

  Above was the first answer I got. And after further question, I got this.

  "That's all this we know: according to dell it is: 'Next Business Day Support' January 2017"

  I don't know what it means exactly 'Next Business Day Support'. I know that it guarantees are called 'Day working on-site' and "Next Business Day ProSupport", but never heard of "Next Business Day Support'. Is this something new?

  As I am in the United Kingdom and the laptop is in the United States, the guarantee should be transferable after purchase. And I heard that only 'Service business day following on-site' is transferable on the international scene.

  Could someone throw a light on the issue?

  Thanks in advance.

  LealMusic,

  UK USA warranty transfer can be difficult on a system that we have sold. 10 x difficult for resellers. USA and UK guaranteed specifications differ and can not transfer. These ebay sellers move computers from one area to another without any real knowledge of our policies. You could get a laptop from them that initially sold off Japan Dell. My advice, find the phone you want on the Dell UK Outlet site, NOT a seller on ebay. Our site will explain your warranty offerings.

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Small Business VPN

  The ultimate goal is to be able to access my intranet in my small business from a remote location. When I'm at the store, I can access the network through 'My computer' and see my network printer and files stored on the server. I want to be able to access this network from remote locations in order to then print in my store and work on projects that I recorded on my server. I work from my laptop to the home school, various locations, Hotels, etc. then what I understand will continue to change my IP address. If I am not mistaken, this means I have to start a VPN and open a DMZ. If anyone else knows how differently, please let me know.

  I set up a virtual private network to my store on my work computer and set up on my laptop using the VPN Wizard in windows. But I'm short the problems getting through my router. I have Windows Vista Business on my work PC and windows home 7 on my laptop. The internet in router Belkin F9K1102 v1000 before going to my work computer and goes through an Actiontec GT701-WG gateway. Belkin support sent me the instructions to turn the DMZ and define virtual server ports. I think I have about this law, still trying to figure out the incoming port information they gave me because it has been translated into English by a computer program. They said four inbound ports allow and then gave me a bunch of numbers:

  TCP 1723 PPTP 443 SSL 10000

  UDP 1701 L2TP, 500, 50 & 51

  Written just like that in the email. I recognize the TCP and UPD, just use the 1723 and 1701 and what are the rest of the numbers? Do I need to set up a DMZ on the bridge too? Any help would be appreciated.

  The native PPTP VPN server on the Vista desktop needs than the TCP 1723 Port forwarded. Close the other ports. It said that there are also protocol 47 GRE traffic to pass through any firewall/router that VPN server is behind. Some barrier-lights/routers call Pass Through PPTP or VPN Pass Through or as the pass of Windows Firewall that automatically if the TCP 1723 Port is open. This page has troubleshooting at the end.

  http://theillustratednetwork.MVPs.org/Vista/PPTP/PPTPVPN.html

  If any firewall/router does not pass the GRE protocol 47 traffic, you must replace the device or switch to a newer firmware to fix the problem.

  Affecting the VPN server in the DMZ, he exhibited to the public internet. Normally I should not do so because of security risks.

  An alternative might be to use the function of TeamViewer VPN. TeamViewer note is NOT free if used for commercial use.

  http://www.TeamViewer.com

• outgoing faxes of Small business server 2008 does not

  I have a Wnidows Small Business Server 2008 running in 64-bit. I have 2 US Robotics modems attached to the server with the fax server role installation. Can receive faxes on both machines, I'm unable to send faxes on one or the other. Spoke about this problem at U.S. Robotics and did all the troub; e SHOOTING they asked and their answer is maybe to try to reinstall the Fax Server service. It seems resonable? If I do what are the procedures that I must take inorder to completely remove the Fax Server Service in order to get a clean reinstall of it? Thanks in advance for your help.

  Hello

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to Windows Server - Domain (VPN) and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  LC

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Small Business Server 2011 Essentials activation problem.

  I downloaded Small Business Server Essentials 20011 and installed on my server, went into Control Panel and active. After 'enabling', I restarted and it said 3 days for activation. I called MS technical support and asked for help, he I was travelled by using the prompt for activation. After that, the pop up said 57 days remaining before activation. However, in the Control Panel, it shows more than 3 days. I'm afraid that the OS crashes me after 3 days passes. How to activate during the trial that MS wrote that I'm supposed to have? Help is greatly appreciated.
  Thank you.

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Small Business Accounting 2006 for Vista download

  I am trying to download my 2006 version of MS small business accounting on my NEW computer which has Windows Vista as operating system. I downloaded all updates and it still not open. I click on the software, and it shows that it is opening. Then he said that a problem caused the SMBA to stop working and MS will give you a solution for the program and it will stop runnng but then I don't get any information.
  I checked all of the patches that I can find and that are related to this issue. Help! Thank you!

  Hello Miranda,

  Thanks for posting on the Microsoft answers Community Forum.

  Your version of Microsoft Small Business accounting 2006 is not compatible with Windows Vista.  You can view the compatibility of the software with Vista on the compatibility of Microsoft site. http://www.Microsoft.com/Windows/compatibility/search.aspx?type=software&s=small%20Business%20accounting%2023006&page=6

  However, you are eligible for a free update to Office Accounting 2009 if you have a licensed copy of your software in 2006.  Existing customers who have a license for 2006, 2007 or Microsoft Office Accounting 2008 are entitled to a free upgrade of 2009 Accounting Office. Please refer to the URL below to determine your upgrade path.

  http://www.ideawins.com/upgrade.aspx

  I have also included the link on how to upgrade to Office Accounting 2009. It is recommended that you back up your current data in Small Business Accounting 2006 before the upgrade. If your SBA 2006 should not be SP2, you may need to upgrade the service pack before the backup.

  http://www.ideawins.com/UpgradingFromSBA2006.aspx

  Once you have upgraded and loading your data, you might want to consider uninstalling Microsoft Office Small Business Accounting 2006 (SBA). SBA uses an older version of SQL Server called MSDE (Microsoft SQL Server Desktop Engine), and that your computer will run faster if you uninstall SBA and MSDE.

  Please post again if you have any questions or concerns.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.