One-to-one NAT and small business routers

Hello all, can anyone tell me if there is any router for small businesses that offer a NAT?

Here's what I do: I have several IP addresses public Qwest has given me. I have two servers that provide e-mail and web hosting for two different areas. I want to put the client machines on a LAN VIRTUAL (VLAN Z) and assign a public IP address (to separate traffic from the server). I want to put every server on its own LAN VIRTUAL (VLAN & XY) and assign to each its own public IP address server. I need the router to be able to provide a firewall and port forwarding for each VLAN. I also need to be able to carry traffic between VLANs for VLAN Z customers may access their e-mail and websites on VLANs X and Y. I have also need to be able to send DNS traffic between the VLANS so each server can provide resolution of names for their respective areas.

So, is this possible with a small business router or I have to watch something different? I am pretty sure that this configuration is not possible with my current Cisco RVS4000. What it boils down to is that I need a router that is able to have multiple public IP addresses on the same interface and pass the public addresses to subnets private VLAN. It would be a NAT, as I understand it... right?

Any help is greatly appreciated!

Hi Taylor, please use our forum, my name is Johnnatan and I'm part of the community of support to small businesses. I ve seen your post and I was looking for some devices that could help you, these small business router supports the functionality you were missing, the one-to-one nat, also the routing features, you see the list of routers Rv here

http://www.Cisco.com/en/us/products/ps9923/products_data_sheets_list.html

I chose two models that may be useful for you:

Rv180

http://www.Cisco.com/en/us/prod/collateral/routers/ps10907/ps9923/ps11995/C78-697397_data_sheet.html

Rv220

http://www.Cisco.com/en/us/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html

I hope you find this answer useful,

* Please answer question mark or note the fact other users can benefit from the TI *.

Greetings,

Johnnatan Rodriguez Miranda.

Support of Cisco network engineer.

Tags: Cisco Support

Similar Questions

  • Is VLAN via VPN possible with any of the Small Business routers?

    A tagged VLAN (for voice) will be routed through a VPN gateway to gateway on any of the Small Business routers, such as the SA520? This router is equipped

    Parameters of VLAN Trunking.

    No, it is not possible to send traffic to vlan via VPN on a series of SA500, but you can create a tunnel for each subnet, you need to pass traffic.

    hope this helps,

    Jasbryan

  • What small business routers support DHCPipv6-DP?

    I have a rv042-g, which apparently does not support the DP. DP is necessary for subnets to connect your local LAN ipv6 addresses to the Internet.

    (If there is a manual way to implement, I have not found it).

    I intend to return or sell the rv042-g once I found a better router.

    Looking through this thread suggests that it is supported on rv042 but not the rv180

    https://supportforums.Cisco.com/discussion/11629126/does-rv180w-support-...

    SMB team may be able to tell which specific version of fw its on

    http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...

  • Dell PE 1950 and loading of Small Business SERVER 2003

    Recently bought a Dell PowerEdge 1950 off Ebay for a training machine. Also bought a few books of MCBS Server 2003 and Small Business Server 2003. I try to install SBS on 1950, but it does not recognize the RAID. I have a USB floppy drive I could load with F6 drivers but can't seem to find just the Perc 5 / I drivers. Site Web of Dell gives only a Setup driver that wants to install the drivers on my laptop when I use it. Could get only the drivers for a PERC 5 / I integrated. My Service tag # maintain the label removed by privacy policy > I tried a server assistant open gale who would have worked very well, but it doesn't have the SBS2003, only Server 2003 list that does not work either. Thanks for your help

    You need the "hard drive" (ZPE) version of the driver, and you have to run the EXE file to extract the files before using it:

    http://downloads.Dell.com/FOLDER97889M/10/DELL_MULTI-DEVICE_A07_R211422.exe

    In addition, you MUST configure the RAID in the CTRL-R utility until all discs can be seen by the operating system, even with the correct drivers.

    You realize that Server 2003 will be end of life in less than a year, right?  Why the push for 2003 training?  You would be better off learning from 2012.

  • Problems with config Small Business switch

    Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

    On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

    Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

    GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

    The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

    All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

    Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

    I added two screenshots.

    Seriously, I'd appreciate the help.

    Thank you

    Bob

    Hi Bob,

    Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

    Thanks in advance,

    Garrett

  • Adobe CC small business package?

    Can someone help me by telling me how many computers can I allow/activate with one Adobe CC Small Business package?

    We have four Macs in our office and want to run Premier Pro and Adobe After Effects on four.

    Do I have to purchase individual subscriptions for this?

    Teams is licensed per seat (per user).

    http://www.Adobe.com/products/creativecloud/FAQ.html#CC-teams

    Purchase licenses as needed. You also reassign the seats according to the needs.

  • A user to our small business reports that she one day noticed that the contents of its files to Outlook Express disappeared. Records are intact, but the messages have disappeared.

    Outlook express content of some files went

    A user to our small business reports that she one day noticed that the contents of its files to Outlook Express disappeared.  Records are intact, but the messages have disappeared.  Strangely, what happened to half of its files; the content in the other half is still there.

    She uses Outlook Express 6.
    Suggestions?
    Pamela

    In addition to comments of Bruce, likely OE compacted messages and in doing so, he probably wiped out the where they are absent.  Check your Inbox and message store bak files which are backups dbx files prior to compaction (see www.oehelp.com/OETips.aspx#2).  If you cannot find the bak files, then you will probably use the extract of the service drive of my DBXpress program (see www.oehelp.com/DBXpress/).

    Steve

  • Impossible to scan an image larger and small photo on 6510 all-in-one

    Cannot parse an image larger and small photo on HP 6510. Product #CQ761A, model # B211a.

    Using Windows 7 64 bit PC. Resulting photo in my pictures is a small photo of bitty. Tried to 600 dpi and 1200 dpi also. Get always small scanned image. Any suggestions?

    Bought a memory card that works with my printer.

    Am ready to copy & paste as you suggested, but couldn't find any icon on my PC that will give me a place where I can get there.

    How can I find that?

  • Small business and creative projects

    I am trying to decide which members of cloud I'll buy. If I buy one small business, one that costs $ 49.99 / month, how many computers can I then install on?

    To clarify, with the plan of the Small & Medium Business Teams, the price indicated is per license and you need a license for each user.

    A user can activate/install apps on 2 of their computers work for example computer and computer laptop.  It is the same for the individual subscription.

    Thank you

    Bev

  • When I open Thunderbird it shows download 1 of 27 messages, but only downloads one 1 and stops, I then mark as spam and delete it from the junk e-mail folder

    When I open Thunderbird it shows download 1 of 27 messages, but only downloads one 1 and does not download the other 26. I mark as spam and delete it from the junk e-mail folder. I press the button to get the Messages and the same thing happens again with the same message that was deleted before downloads and other 26 messages fail to download. How can I get rid of this email and download the rest of my emails?

    What is a POP account? Please confirm.

  • At least one number and one letter in English are required in the password.

    At least one number and one letter in English are required in the password.

    Page of the router is not fully displayed

  • I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

    I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

    Can you explain what a printer has to do with the download of the videos?

  • HP5610 All in One Printer and for some reason any fax does not work

    * - Original title - the printer does not properly

    I have a HP5610 All in One Printer and for some reason any fax does not work.  What could be the problem?  I don't have the CD installation disc.

    Hello

    To provide a proper resolution, I would need more information on your side.

    1. what operating system is installed?

    2. don't you make changes to the computer before this problem?

    We can refer to this article and check if that helps.

    Unable to send or receive Fax: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01670485

    You can also ask your question in the Forums of HP Support (scanning, fax and copy): http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/bd-p/Scan

    Thank you.

  • We stil run an extensive system of Small Business Accounting. I wonder what others have opted for now his party and support.

    We stil run an extensive system of Small Business Accounting.  I wonder what others have opted for now his party and support.  We have to find a new solution.  Recommend something?

    Shane

    original title: Small Business Accounting

    Try: QuickBooks

  • reinstalled Windows Small Business Server 2003 and Intranet failed during installation

    I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.

    Hello

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

Maybe you are looking for

  • 'report a problem' in itunes is no longer works. How can I request a refund?

    'Report a problem' in the past section section purchases account for Itunes, there is a reaction. Tried twice. Is there another way to request a refund?

  • The webcam works in Skype-only test mode

    My apologies if this has developed before, but the previous posts, I read all had slightly different questions. I'm a newbie when it comes to linux, but I have recently installed ubuntu 11.10 and tried to get operational Skype. Program starts fine, b

  • How do I get emails to stay on Yahoo/ATT sever

    I download my mails from Yahoo / AT & T and it works find.  But I want them to stay on the server as well so I can access it via the Yahoo app on my iPhone.  But they just "pass through"Yahoo."  There is no option to "leave on server" in my configura

  • RV180W static DHCP

    I've updated the firmware 1.0.1.9 for 1.0.3.10 Now, I can't announce a static IP address to the list. Before, I added some static IP addresses and now I see one of them. Does anyone have this problem? Does anyone have a solution? (Sorry for may bad E

  • Indexing of the options does not not - Dll common shell Windows does not

    Hello I can't open the indexing options. It stucks at "awaiting to receive the status of indexing. the error is "Windows Shell common Dll is not responding. I tried the fix (support.microsoft.com/mats/windows_search/). And create a new account. And S