What storage system RAID should I use?

Similar Questions

• What type of layer should be used when using the effects lighitng filters "I can't using the way I expect to work -

  What type of layer should be used when using the effects lighitng filters "I can't using the way I expect to work -

  I want to add lights to he image - and to inform the parties of the image - I duplicated the layer add the lights in the filters, but it does not act as a process additive-

  Check out this tutorial from Phlearn on YouTube. It is a bit more flexible, but, of course, requires a bit of elbow grease more Photoshop-wise.

  Create beams of light in Photoshop - YouTube

  Using this technique, you can adjust the 'lights' as you want by manipulating setting masks. See screenshot below. (Still once again, excuse the butchering.)

  

• What raid should be used on asm oracle rac11g

  Hello
  
  As we modernize our system of new hardware and software. We implement rac oracle 11g with asm and using HARDWARE not software raid.
  
  Some people suggest me to use raid 6 here are the questions I'm looking for:
  
  1. what raid 6 means and how it works with asm?
  
  2. what will be the combination allows for optimal performance of storage for example
  
  RAID 1 + 0 = redolog
  
  RAID 5 = Archvielogs
  
  Like this.
  
  Thanks a lot for helping me.
  
  Kind regards
  
  Adnan Hamdus Salam

  Adnan says:

  As you say «However, ASM can use drives RAID5 or RAID6.» "And because they are already configured as redundant, you can tell ASM not to reflect the content of the disksgroup located on the RAID5 disks.

  Fix. You simply set the diskgroup as being external redundant. ASM will therefore not reflect the diskgroup.

  It applies to RAID 6 with regard to the mirroring of disks ASM?

  It applies to all the RAID drives. You can use the disk - create an ASM diskgroup for these discs and say ASM do not mirror, because this diskgroup resides on redundant disks on the outside.

  ASM does not know what levels RAID is a disc. He knows only that it is a disk that can be used. DIRECTIONS for USE, you must explicitly specify ASM. You must specify ASM if you want to use this disk as part of external diskgroup redundant, a normal redundant diskgroup or a diskgroup extremely redundant.

  The disc is maybe not even RAID' ed. It could be simply hard drive SATA/SAS. No RAID. And you can tell ASM t create a redundant external diskgroup using the disc. ASM then leaves the redundancy for this disc in your hands and to the underlying storage architecture.

  If there is no RAID and SATA/SAS drive failure... Bye Bye all data on this disc. No problem of ASM.

  If this disk is part of a set of RAID6 and it fails... not the problem of the DSO. You and the underlying storage system must manage the redundancy and the difficulty of the RAID for this disc.

  Only when you say DSO that the diskgroup is redundant, then it will be in the picture. And wait allows you to provide records enough so he could maintain a mirror 2 way or 3-way for this diskgroup, depending on your configuration of the diskgroup.

• Satellite L500-19 X - what speed of DVD should I use?

  Having just bought a laptop, as above I am faced the question of how fast DVD to use.
  John Lewis PC after sales help service advised me that time 16 DVD sometimes causes trouble and I should get 8 X and use them if possible even if they say they are now almost as rare a hens teeth. Say them a 16 X can be OK but X 8 would be more reliable.

  I have not started my laptop but as am waiting for supply of X 8 I found on Ebay as recommended DVD-R NOT + should be used. I see that the disc tray is marked rewritable + leading to more confusion.

  Make a copy of the operating system upon receipt of the X 8 and not before.

  All advice or comments would be most appreciated

  For a long time, I always use the same DVD and I have never, but never really noticed some problems burning, especially not to create recovery media.
  I use TDK DVD-R 1-16 x speed empty media.

• What ADF faces component should I use.

  What component should I use. I need to make a box as below. Please check image.help me

  See the image: forum1

  Try as

  af|panelBox::header-center{

  background-color:#1F3B88;

  color:#1F3B88;

  }

  af|panelBox::header-text {

  color:White;

  }

  af|panelBox::header-start:core:default{

     background-image:none;

     display:none;

     background:#1F3B88;

      background-color:#1F3B88;

  }

  af|panelBox::header-center:core:default{

     background-image:none;

     background:#1F3B88;

     background-color:#1F3B88;

  }

  af|panelBox::header-end:core:default{

     background-image:none;

     display:none;

     background:#1F3B88;

     background-color:#1F3B88;

  }

  af|panelBox::footer-center:core:default{

     background-image:none;

     display:none;

  }

  af|panelBox::footer-start:core:default{

     background-image:none;

     display:none;

     background:#1F3B88;

     background-color:#1F3B88;

  }

  af|panelBox::footer-end:core:default{

     background-image:none;

     display:none;

     background:#1F3B88;

     background-color:#1F3B88;

  }

  af|panelBox::center:core:default{

     background-image:none;

     border-left:none;

     background:#1F3B88;

     background-color:#1F3B88;

  }

• Satellite 1400-503: what kind of RAM should I use?

  It is pre-installed with 256 MB of RAM (I think) and I would like to enhance it with additional 256 MB in the free location. What kind of RAM I need? the preinstalled is a samsung with the inscriptions on it: Korea 0228 pc133s-333-542-81 L7A M46453254CT

  Hello

  I want to clarify that you can upgrade the memory to 1024 MB.
  As far as I know Toshiba recommend using these memory modules:
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

  But as you mentioned the laptop supports modules SODIMM 144 pin PC133 .
  In this case, you use modules with these properties.
  But I prefer the modules Kingston or Toshiba. You know that no names module performance is not very good.

• Elite book 8440p: what card PCMCIA type should I use?

  Just bought a used book of Elite 8440p.  I need to know what type of PCMCIA card that it accepts.

  No PCMCIA... those who have not been on laptops in 12 years. The laptop has a 54mm Expresscard housing that looks like a little to a PCMCIA card slot, but is a bit different. It is right above the headphone Sockets.

  It is a USB 3.0 Expresscard 54:

  

  The laptop has no usb 3.0 so this kind of card would add this feature.

  https://www.Amazon.com/WBTUO-notebook-Express-3-port-expansion/DP/B00TGWNR58/ref=sr_1_fkmr0_1?ie=UTF8 & qid = 1477075405 & SR = 8-1-fkmr0 & Keywords = ExpressCard + 54 + TV + Tuner

  Tuners TV, card readers, external video cards, all kinds of ExpressCards. ExpressCard has now disappeared and new laptops do not include it but maps are always available. PCMCIA was equivalent to the old slots ISA and PCI in an office; ExpressCard is equivalent to the PCI-e slot.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• What moments of hu should I used?

  Dear

  I'm trying to find the time Hu of my object in image

  I find in the help of labview that there seven times Hu as indicated

  which is invariant. to scale and move and rotate?

  

  Best regards

  Hi mangood,.

  as far as I remember Hu times 1-7 are centered and standardized, which makes them indifferent to the shift and scale.

  Combining special moments - which are invariant to scale and shift - are supposed to be indifferent to the rotation e. g. Hu defined time.

  So, each one should be indifferent to the rotation

  With regard to the recognition of forms, I would like to all Hu 7 times for example use a Hu Moment vector.

  But you must keep in mind, Hu Moments was designed to distinguish the different characters typed.

  Kind regards
  Alex

• HP touchsmart 17.1 desire: what type of DVD should I use for writing with hpenvy touchsmart

  What type of DVD can be written to the pc

  Hello

  What is your "hp envy touchsmart 17.1. Normally, you can use blank DVD + R or DVD-R for write.

  Kind regards.

• I have 'Adobe model' my iPad.  What is the soft should I use on the laptop to do the same thing?

  Can someone please tell me I should use on my laptop which does the same thing that "Computer Adobe" is the app on my iPad?

  Hi Paolo,.

  Adobe Comp brings some of the features of Adobe InDesign on your mobile device. There is no model for the laptop Desk/computer version, you can expect to use InDesign (and in fact your Comp creations can be opened directly in InDesign to continue your work).

  Mike

• What style code CSS should I use for the html code embedded to Google adsense ads?

  When I paste the html code in my object > area html in Muse, advertisements appear where they should in the right column (I use the web page layout of four columns, right column, three columns from the left to the content as text and photos dedicated to the ads), but it my ads which often appear to break text columns to the left causing the text boxes, pictures, or all the two seem to be lower on the page, below the bottom of the ads in the right column? On some pages, that is not the case, others for this. I need a CSS style code to prevent this, and where can I find this code in order to ensure that the ad column does not affect the three columns from the left to the text and other graphics?

  Yes, you can add the style setting in the element. There are many free resources for the solution with style like stackoverflow etc.

  Thank you

  Sanjit

• HP Compaq Elite 8000 small: what type of cable should I use for dell dual monitors hp compaq 8000 elite?

  I'm not very tech savy when it comes to computers. I'm trying to understand what kind of cable I need to buy to allow both of my Dell, monitors to connect to the back of my Tower. I have only 1 connection vga at the back of the tower.

  Not at all.  Gold is one of the best drivers.

• I c500 4 k in apple prores footage. What is the sequence should I use for editing on?

  ?

  I would bypass the dialog box new sequence. Once you import your media in the project drag a clip to the button new item. This will create a sequence that best matches your clips properties.

  

  Peter Garaway

  Adobe

  Premiere Pro

• Satellite P100-488 - what memory modules that I can use

  Hello

  I want to upgrade my memory from 1 GB to 2 GB, but I can't find the correct specifications for the 1 GB memory current installed on my laptop.

  Indeed, I could only confirm that the frequency is 533 Mhz, but my question is: what type of memory should I use? PC2-4200 or PC2-4300?
  I am unable to find the information of the current type used on this laptop.

  Thanks in advance.

  Hello

  This site of memory should help you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29973&ft=m&St=3

  According to this website of the Satellite P100-488 supports DDR2 667 MHz (PC2-5300) memory modules and you can upgrade it to 4 GB max.

  I hope I could help!

  Greetings

• Satellite A200 - 23Q PSAE6E - what SATA driver should be used with Vista Pro

  What SATA driver for toshiba Satellite A200 - 23Q PSAE6E should be used for Vista is.

  Where can I find.

  Hello

  You need the Intel Matrix Storage Manger.
  This package contains the SATA drivers.

  Here is a link to the page from Intel:
  [Intel® Matrix Storage Manager | http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101]

  Concerning