What WLC interface should be solved in cisco-lwapp - controller.domain

Similar Questions

• my pictures are coming out on the side when downloaded on my computer what can I do to solve this problem

  When I download my photos from my iphone to my computer they come out backwards what can I do to solve this problem

  Hello

  1. what software do you use to view the photos?
  2 is confined with any particular photo?

  Method 1:
  You can try to rotate images in Windows Picture and Fax Viewer and check.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/manage-your-pictures

  Method 2:
  If the problem occurs with all the photos and then, try to rebuild the cache of icons without restarting the computer.
  a. press the combination of keys, logo Windows + R key to bring up the Run dialog box.
  b. type cmd and press ENTER to open the command prompt window.

  c. in the command prompt window, type the following commands pressing ENTER after each line:

  Taskkill /f /im explorer.exe
  attrib-h "%userprofile%\Local Settings\Application Data\IconCache.db.
  del "%userprofile%\Local Settings\Application Data\IconCache.db.
  Explorer.exe

  d.This should restart Windows Explorer and rebuild the cache of icons as needed.

• Action Center says it has detected potentially harmful software and won't show me what it is or I solve.

  Action Center says it has detected potentially harmful software and won't show me what it is or I solve Windows defender is to come clean and so security micro scan

  Original title: Action Center

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in normal mode. Disable other security software while you do the analyses.
  http://www.computerhope.com/issues/chsafe.htm

  http://www.Malwarebytes.org/products/malwarebytes_free http://helpdesk.Malwarebytes.org/Entries/21892442-should-I-Scan-with-Malwarebytes-Anti-Malware-in-Safe-mode-

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• What can I / should I update my iPad iOS

  My iPad which I believe is pre-iPad 2 is in version 8.3 (12F69). What can I / should I accept iOS 9.2.1 update?

  Hello

  Yes go to settings iCloud - backup now.

  Then upgrade to ios 9.2.1 above your WiFi.

  See you soon

  Brian

• What WiFi drivers should install in my laptop...

  What WiFi drivers should install in my laptop... I tried the two ( Realtech & Atheros ) but impossible to install...

  Unable to access WiFi.

  Thank you... paul

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Toshiba Satellite laptop - how can I tell what programs I should be running at startup

  Original title: How can I tell what programs I should be running at startup

  I have a toshiba laptop satellite, since 2008, I don't know what programs should run at startup and those who should not

  See if you can make head or tail of these items.
  I admit that I was never able to know that disable and what to keep, and I had read a few articles on this topic. I'm not too smart, I can say.

  Starting programs database
  http://www.bleepingcomputer.com/startups/

  Startup programs, enable disable ot:
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Startup applications. Do you really need all of them.
  http://www.PACS-portal.co.UK/startup_content.php

• WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

  WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

  WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

  2 forums: you can go:

  1 Windows Vista IT Pro forum, section of Windows Vista service packs:
  Section of Windows Vista service packs:

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  2. Windows Update section:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• EqualLogic group member network configuration error: "management interface should not be on the san subnet.

  Hello

  We currently have new EqualLogic 6100 device with this network configuration:

  Director of the IP - 192.168.0.2 (VLAN1).

  Member network config:
  eth0 - 192.168.0.3 (VLAN1)
  eth1 - 10.10.10.3 (VLAN2)
  eth2 - 10.10.10.4 (VLAN2)
  eth3 - 10.10.10.5 (VLAN2)
  ETH4 - empty

  I would attribute 192.168.0.4 to eth4, but received the error: "management interface should not be on the san subnet.

  I am sure that all interfaces eth has access to the VLAN1 and VLAN2, mean error indicates that eth4 should not access VLAN2 and only access the VLAN1 on the switch?

  Or eth0 should also have access to the VLAN2 only to reconfigure eth0 and eth4?

  Thank you

  > The group eating IP should be in iscsi VLANS?

  Yes!

  Note: If configure you an EQL it will ask an iSCSI port because nothing is more necessary to bring it up. The doest previous EQLs have a dedicated Mgmt Port and later, you can convert the last ethX as a MGMT port. This is the reason why configure you ISCSI at the beginning. (Think of a mixed group of newer and older models, and you get a picture)

  OK... once again it is the one and only member of the Group and there is making the production host connected to the right?

  The change of IP address, to a 3rd. subnet for temporary use.

  -Do not touch eth0-3 and the IP address of the group now

  -Configure the MGMT port and IP address management in the tempr group. Subnet. Use the Config-> Adv. Group-> network MGMT. You can change the MGMT Port of the Member, and the address IP of MGMT

  -For the registration of the configuration, you will lose access. You must place your admin PC in the templ. subnet so

  -Connect to the GroupMgr with temp again. INTELLECTUAL PROPERTY

  -Now you can change the IP address of group 10.10.10..x

  -Now you can change eth0 10.10.10.2

  -At the end, you can change the address IP of the Group MANAGEMENT, as well as the MGMT Port to 192.168.0.x

  -Change the IP address of your admin PC rear

  A failover, you should consider to hang a serial cable the active controller of the EQL. Use 9600,8,1, N with your favorite terminal program (putty.exe on windows). All the steps, you can perform from the command line.

  If this group and the only member not in production, but you can reset the config and restart from the beginning.

  Kind regards

  Joerg

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• my hotmail account will not open what can I do to solve the problem?

  For some reason any my hotmail will not work all of a sudden what can I do to solve the problem?

  For some reason any my hotmail will not work all of a sudden what can I do to solve the problem?

  Hotmail is part of Windows Live Solution Center. Use the following link to your question. Don't waste your time here.

  Forum on Hotmail - Hotmail son section:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• What are the ports used by the Cisco VPN Client?

  Hello

  I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

  I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

  What are the ports used by the Cisco VPN Client?

  Thank you

  You need to open:

  UDP 500

  ESP protocol

  You must also open the UDP 4500 port (if using NAT - T).

  In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

  1. If using IPSec over TCP 10000, then open TCP 10000.

  2. If using IPSec over UDP 10000, open UDP 1000.

• BlackBerry smartphones how should I solve

  I can't open the main folder or the sms folder.

  the message says:

  Eception exception DSSMA: State not valid (5): 803

  How should I solve it

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• my cam continues to go out of focus most of the time. What can I do to solve the problem

  my cam continues to go out of focus most of the time. What can I do to solve the problem

  Review of the help/support on this site of cam manufacturers

• Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Next 'Units of the rule' in the layout, select the good 'units of the rule' in the drop down, and then set your margins.