What would a computer turn on & off whatever it is self

Similar Questions

• Hi, I would like to turn off my old laptop CS6 and reactivate it on my new. To reactivate it, what is the process? I need to download the product as the first time? There is something to be careful? Thank you!

  Hi, I would like to turn off my old laptop CS6 and reactivate it on my new. To reactivate it, what is the process? I need to download the product as the first time? There is something to be careful? Thank you!

  Hi petrosk47967892,

  To reactivate this product on a new machine, you can simply download & install the software product on the new computer using the link below and enter the serial number when prompted. Make sure you turn off the product from your old machine by running one of the products, select help > deactivate/signout.

  Download CS6: download produced CS6

  See you soon,.

  Michael Sharma

• I was almost finished to fill a very large document when my computer turns off. Is it possible to recover what I had done?

  Original title: Document lost

  I was almost finished to fill a very large document when my computer turns off.  Is it possible to recover what I had done?

  Hello

  What document you worked on?

  Have you worked on all office applications?

  If you are working on a Word document, you can check out the following link and check if that helps.

  http://support.Microsoft.com/kb/316951

• What is jucheck.exe? It flashes at the bottom of the screen from the moment where I turn computer to turn it off.

  When I turn on my computer until I turn it off, jucheck.exe flashes at the bottom of the screen. He wants to have access to the computer, but when I say no, it continues to blink. What - what, do I need it, how do I get it off the screen?

  Hello

  That's most of the malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer is going down after I logged off / locked it and operations guys think I'm deliberately turn it off. What is going on?

  It is part of a large network and is updated every night. I was not turn it off, but he told me that my computer is the only one who has been turned off. Ideas?

   

  Hello

  As the computer is on a domain network, the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Windows 7 IT Pro
  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we do not have the

  We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?

  You can't do that. If you have a license for Windows, you can not use it on a Mac.

  In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).

• COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO?

  COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO? I ALSO USE COMPUTER #2

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

  2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use.  I rebooted, but it stopped again.

  The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over.    I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518.  There is no error message but a beep at startup upward.  I ran Windows repair program 'Start' who did a restore without success.  The problem occurs even in Safe Mode.

  Does anyone have a guess as to what is the diagnosis?  Thank you.

  Hello

  Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
  Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
  cables on both ends where possible).

  As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
  It remains under tension if you start from the disc of Vista?

  -----------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My computer suddenly turns power off when I'm uploading photos. Why?

  When I upload photos on Facebook my computer suddenly switches off. What could be the cause of this?

  "Nelson Riñón job" wrote in message News: * e-mail address is removed from the privacy * .com...

  My pc turns off suddenly when I'm uploading photos in Facebook. Why?

  Overheating, driver problems, and many others.  What are your having seen or heard before shutdown? It happens at any other time? Look in Event Viewer to see if you can see any represented pattern that would cause the stop.  Is this a full power off shutdown or a blocking of the screen or the BSOD?  Describe please.

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• computer turns off for no apparent reason. It's all a few minutes using Windows Vista Home Premium SP 2

  Every few minutes the computer turns off. No warning, nothing. It will restart ok, but stops then off again in a bit.

  I can be in the workplace, and it will cut offf.

  I'm usting Vista Home Premium SP2 version.

  Any Suggestions?

  Hello

  1 did you changes to the configuration of the system before the show?
  2. you receive an error message/code when the computer shuts down?
  3 does the computer automatically restart once it stops?
  Event Viewer
  
   
  You can check the event viewer to discover events that could cause this problem.
  See the link below to open the event viewer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  For more information on what information appears in Event Viewer, see the link below:
  Disable automatic reboot manually.
  1. Right click on computer
  2. Properties
  3. Advanced system settings
  4. Startup and recovery
  5. Uncheck automatically restart.
  Resolution:
   
  Step 1:
   
  Safe mode
   
  Start the computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Step 2:
  Clean boot
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
   

• Hibernation problems - my computer turns off but it restarts immediately.

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  Microsoft recommended a different command:

  http://support.Microsoft.com/kb/928897

  I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

  Click Start > programs > Accessories > right click on command prompt > run as Admin >powercfg-h on

  Alternatively, try the Fix - It.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer turns off automatically

  Hello

  my Windows Vista laptop turns off automatically. This isn't a standby automatic regular, Hibernate or shutdown. The computer will just empty. When you try to turn it back on, the message that "the computer was not properly extinguished" sometimes appears.

  This auto disable happens irregularly. Sometimes it seems to happen more often when the computer made the task more or heavier. But the computer seems to be overheating.

  Someone has an idea what could be the problem and I can try to do about it?

  GRT, M

  Suggestions only. I may be far away...

  1. If this problem started not more than 10-15 days ago, and if you remember a time when you did not have this problem, please do a system restore. Choose a 'good' day as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: In most cases, do it in safe mode system restore is more preferable.
  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  2. If it is not an option, going to Safe Mode > selectlast known good Configuration and run it.

  
  t-4-2