My computer suddenly turns power off when I'm uploading photos. Why?

Similar Questions

• message "Turn power off, t.

  My printer Officejet 4620 randomly displays the message 'Turn power off, t' on the screen and do not respond to orders, or the button walk stop. Tried to access the Internet through the web server, but do not respond. The only way to reset is to disconnect the power cord...

  

  Hi @N3oN79Italy

  I'm sorry to hear that you are having problems with your Officejet 4620.

  You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  In addition, click on the link below to make sure that the printer has the latest firmware update. This update of the firmware can improve the performance of the printer and fix various defects.

  HP Officejet Firmware

  If the problem persists, call HP. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• already have adobe CS6 downloaded on an old mac computer that is now dead, I can't open the application on this computer to turn it off, but I wand to download my CS6 even on my new mac laptop

  already have adobe CS6 downloaded on an old mac computer that is now dead, I can't open the application on this computer to turn it off, but I wand to download my CS6 even on my new mac laptop

  The license allows 2 activations, so you should be able to install on a 2nd computer

  If you receive a message that you have exceeded your activation, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• What is jucheck.exe? It flashes at the bottom of the screen from the moment where I turn computer to turn it off.

  When I turn on my computer until I turn it off, jucheck.exe flashes at the bottom of the screen. He wants to have access to the computer, but when I say no, it continues to blink. What - what, do I need it, how do I get it off the screen?

  Hello

  That's most of the malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A110 ranging power off when it is hot

  My Satellite A110 is always turned off when it's hot.

  What is the problem? Mayby fan? Can I change this?

  Hello!

  You hear a fan noise?

  Maybe you should clean the laptop. For this, you can use compressed air jet and could blow the dust from the fan. You n t have to disassemble anything.

  And try to find out if the fan works.

  Good bye

• Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

  Original title: saving photos and videos, common sense?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  =============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Persistent BlackBerry Smartphones 2010 when unknown error uploading photos from the app Facebook of RIM

  Judging by the comments in AppWorld, it looks like last update of the Facebook #RIM for #Blackberry broken upload photo. After reading a few threads here, I tried pulling the battery, delete - reinstall the app, take smaller pictures, removing information geo-tagging and checking permissions. I always get an unknown error 2010.

  I can download to send an email and Twitter without any problem.

  I hope this gets fixed soon. It seems that there are a lot of people out there with this problem.

  Nothing here that could help you?

  Article ID: KB25378 Error codes on the set of the 2000 Facebook Facebook for BlackBerry smartphones

  Article ID: KB25889 Error "there was an error in this load a photo" when you try to upload a photo using Facebook for BlackBerry

• Why my computer to turn itself off the power?

  I can't understand why my computer starts to turn to for no apparent reason. Going to be working very well and then BONNO! It is just off.

  It drives me crazy! Whenever I try to start it upward, he wants to talk about safe mode and the proper techniques of closure. I used the Startup Repair tool and the restoration of the system offered to me by the computer during one of these episodes. I have scanned for viruses with Avast and there is not. I've defragged, cleaned the disk, removed something weird... I searched in the help pages for an answer...

  I use Vista Home premium on a 1 year old Toshiba. I recently used the drive by the manufacturer to reinstall the operating system to get rid of some nasty viruses. Everything was going along great for a month and then he started to arrive.

  Any ideas?

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  When you reinstall the operating system, you must also reinstall all the latest drivers compatible Visa for her.

  Click on the download at the top of the linked page > put in your model number, etc. > download/install the latest Vista drivers for your computer.

  Downloads 1. choose the category 2. choose family 3. choose the model   Show all models Model search filter:

  View Latest downloads» View the most recent list of drivers and software for updates all Toshiba products.

  See you soon. Mick Murphy - Microsoft partner

• Turn the power off when you insert the new hard drive (additional)

  I have a server poweredge R710 Dell with a PERC 6i controller. Currently, there are 3 installed disks than RAID 5 and are 0-2, all of the listed physical disks are online with no hot spare.

  My question is: I don't have 3 disks to install on the server exactly the same readers who are in the current configuration. Do I have to turn off the server to install these drives?  (I'll use OMSA to develop the existing single VD configured.  I saw a post that says not to shut down the server, so I am just wanting to make sure that everything I do is go on the server, install the new disks in slots open while its engine to the top and then make my other functions in OMSA to extend the RAID.

  Thank you.

  You never turned off to introduce new disks, except IF you are migrating a VD together for another computer or controller.

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• Turn laptop off when unplugged

  I just bought a new laptop:HP Pavilion g6 - 2389 ca Notebook PC and my problem is that when I unplug my laptop it turns off after a few seconds and it restarts. but it does turn on it keeps just restarting. There aren't any errors, the battery is new and I checked with the HP battery check and who said it was OK. Now, I have this laptop for a few days.

  and when I try to turn on the laptop while it is unplugged the laptop hangs at the login screen.

  If anyone knows how I can fix it that would be great!

  For some reason your battery is not provide enough voltage and current to your laptop support, since the battery exceeds the limit, it restarts itself.

  Hmmm, theres a problem with the model of your battery as it is not supposed to be with your computer.

  Because it is new, please conatact hp.

  However, if you want me to try to help, I'm happy to.

• XP hangs after "loading your personal settings...". ». Boots fine after turning power off and turn on again.

  This has happened since the installation of ThreatFire.  Freezes when you 1st start of the day, with success during the 2nd test.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• computer says printer shuts off when it is on

  My computer is telling me that my wireless printer is turned on when it's plugged in and that the WiFi icon is turned on.  What can I do to make my computer recognize my printer?  They are both HP and I am running windows 7.

  A wireless printer is deemed be a printer "networked."  You need to check the settings of the firewall on your computer (in Control Panel) and make usre you allow the printer driver to pass thorough.

• Computer laptop turn on/off do not.

  My HP laptop feeds not sure what is. It used to work fine, but now it is as reached. I don't know that I have done nothing physical him so it must just be a hardware problem. I tried the static electricity thing and I tried everything to make it work, but I don't know what is happening. I don't know if the charger is broken or do something, but nothing moves.

  My HP laptop feeds not sure what is. It used to work fine, but now it is as reached. I don't know that I have done nothing physical him so it must just be a hardware problem. I tried the static electricity thing and I tried everything to make it work, but I don't know what is happening. I don't know if the charger is broken or do something, but nothing moves.

  Hello

  If you do not get the start of the HP logo screen and there is absolutely nothing on the screen, even when you have connected it to the main power supply, you have a hardware problem.

  If under warranty, contact HP.

  If it is not under warranty, contact a good computer repair workshop, local and reputable.

  See you soon.