When I load a .jpg file to 'My pictures' one '. the jpg.files folder is automatically created.

Similar Questions

• When I'm in a file folder, the option (photos) "Send to mail recipient" is missing.

  My operating system is Windows XP Home Edition (5.1.2600) and my Email is MS Office Outlook 2003 (11.8313.8221 SP3).

  When I'm in a file folder, the option (photos) SEND it to THE RECIPIENT of the MESSAGE is missing.  When he was here, I would choose it, click the radial on the dialog box that follows to "minimize" the size of the image.

  The option to SEND to THE RECIPIENT of the MESSAGE has disappeared.  I don't know when it went, why (perhaps as part of a recent update automatic?), or how to restore.

  original title: option SEND to THE RECIPIENT of the MESSAGE is missing in Windows XP Home Edition

  Try;
  Beginning
  Run
  regsvr32 sendmail.dll

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• Can you tell when a loaded SWF has reached its last picture?

  I used loadMovie to load an external SWF into half less of a main "shell" swf When the loaded SWF playback (it's just an animation) finished, I need to fill in a text field with the word "DONE". The text field lies on the _root, and I need a way to know when the loaded SWF file has reached its last picture...
  
  It would be obviously easy if I had the. FLA of the loaded SWF file because I could write any actionscript code on the last frame of the SWF to fill the textfield _root. Alas, I do not have the source of the loaded SWF FLA, so I need a way to have the "shell" SWF/FLA main know when this loaded SWF has reached its end. Is this possible?
  
  Thank you!!!
  

  DIY_Lobotomy,

  > The reality of my situation, it's that there is only a 'menu' of sorts that
  > Gets load in "contentClip". This "menu" has a bunch of links.

  So far so good.

  > When you click on it, each link load a DIFFERENT swf file in 'contentClip '.
  > It's THESE sovereign wealth funds I need to see the end of.

  It is always correct.

  > There is actually more than one, so they're not exactly being
  > loaded directly from my main movie, because they are actually loaded
  > based on a link that is clicked in the movie that is currently loaded
  > in "containerClip".

  The concept is still the same, no matter what happens. Any depth the
  a clip-expenses-other chain goes, you have to keep the notches on each link in the chain.
  When the last link has loaded, you will be able to make your object reference
  in this clip. This film clip - because it's an instance of the
  Class MovieClip - will have the properties _currentframe and _totalframes.
  You'll just check * that * cliip instead named properties
  contentClip in my own example.

  You can run a loop using onEnterFrame or, if you prefer, with setInterva().
  Is not little matter, as long as ask you repeatedly deep
  clip to test its current image against its last picture (this assumes that)
  the test clip is a linear animation matching the end to his
  last image; otherwise, you could check against this arbitrary _currentframe
  The frame number).

  > I hope it was not too complicated! You always have a solution?

  Not too confused to understand, but it might be confusing to the road
  through in practice. Not to be confused, actually, but meticulous... you will
  be careful with your multiple paths. The nested clips are very similar
  folders nested on your hard drive. The instance names relate to the
  folder names.

  Now, if this menu is not an instance name you condition - or if
  the forks on the way has an instance name you can't control - you can
  always refer to nested clips. If you test your file in the
  Debugger Panel, you will see all the instances arranged in hierarchical order.
  You will see that automatic instance names are provided (something like
  ("instance1", "instance2", etc.).

  David Stiller
  Contributor, how to cheat in Flash CS3
  http://tinyurl.com/2cp6na
  "Luck is the residue of good design."

• How can I load Windows Mail on Win 7 system of the windows.old folder

  How can I load Windows Mail on Win 7 system of the windows.old file win7 made during installation.

  Windows 7 does not include an email Client.

  You have great choices of Email client
  MS Outlook (continued from part of MS Office)
  Windows Live Mail
  Thunderbird

  To download and install Windows Live Mail:
  http://download.live.com/wlmail
  During installation, you will receive a list of programs to install, choose "E-mail" buy uncheck all items except "Mail".

  Mail from Vista to Windows 7 Live Mail:
  Look for the following folders in the Windows.old folder.

  (1) find the program files > Windows Mail
  (2) copy all files and folders in Windows Mail folder to a new folder (name the folder: VistaMailExport)
  (3) in Windows Live Mail, use the "Import" and point to the folder "VistaMailExport".

  Import your emails, contacts and calendar in Windows Live Mail
  http://Windows.Microsoft.com/en-us/Windows7/importing-your-e-mail-contacts-and-calendar-into-Windows-Live-Mail

  Thunderbird:
  http://www.mozillamessaging.com/en-us/Thunderbird/

  Public discussion group Windows Live Mail:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• On sending the settings when you load a SWF file

  I have a flex application that loads other flex applications, the width and the height of the other applications should be those of the swfLoader, so I'll try this:
  
  swfLoader.source = event.url.concat('?width=100');
  
  so in the application that will be charged, I have this:
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml " width =" {parameters.width} "height ="634">"
  
  but the compiler gives me an error saying that I can't make a connection there, so how I do it?
  
  I need my application to be that of the SWFLoader resolution, so how do I do this?
  

  I have not tried, but consider making width = '100% ' in other applications. Who should deal with the full size of the charger.

• How to open DOC files. When I try to open an all I get is the message "this folder is empty".

  When the above happened the first time I thought it was just a mistake to someones hand, but he has now occurred several times and some are of importance. Tried to download the player from Microsoft Word, but without result.

  If your associated file is messed up.

  Click default startup programs (in the R/H side).

  Click on the link "associate a type of file or Protocol with a program)

  Scroll to .doc, select it and press the program button. Select the Word Viewer.

  I repeat - you HAVE INSTALLED Word Viewer and not just downloaded the installation file?

• When I load Photoshop Elements 8 and click on "Organize" the program closes.

  Why does Photoshop Elements 8 farm as soon as I click on organize? Where are the Experts from Adobe that meet wll in two or three hours depending on Naha?

  Hi markt

  Please see the system troubleshooting errors, freezes | Organizer of the elements and follow the steps

  Let us know if this helps

  ~ Assani

• When you use Itunes on my Ipod Touch 5 generation, the Ipod is no longer automatically past from one song to another. This seems to be a novelty. There is a button on the RIGHT side of the upper third of the screen where you can choose options but go n0.

  When you use ITunes on my Ipod Touch 5 Gen, running IOS 9.2, he has recently stopped automatically switch a song on one album to another while listening to ITunes. I discovered a button with 3 points to the RIGHT side of each title of the song which, when typed gives a different options for example then played, add up to the next etc.. If you use these all this seems to get worse with more choices that appear. I know that sounds incredible, but I have owned several Ipods that I use just for listening to music. Mine is a 32 GB version that can store a large number of albums, most of which I bought and loaded into my Ipod. A few albums that I downloaded from ITunes. How can I get it from my Ipod to listen to music in the ITunes application without having to select one of the 55 options?

  See if the chapter of the music of the Manual:

  http://help.Apple.com/iPod-touch/9/#/iph3bd017b9

  Next:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• My video files do not automatically create Thumbnail Images

  How can I get my files video back to generate thumbnail images? At the moment only my MKV files are generating of thumbnails, but regarding my AVI, MP4 files, WMV and other files like those, they are just showing the default image of windows media database. And also is it possible to do it without using a third-party codec pack because I think that's the reason why it happened in the first place, I've been using Divx 7 for Windows.

  Hi Bryshon89,

  Welcome to the Microsoft Answers site!

  Go to Windows Explorer and the menu bar, click Tools and then click folder options.

  Click the view tab and make sure that the option "Always show icons, never thumbnails" is unchecked.

  You can also try to create a new user account and check.

  To do this, please go to Control Panel -> view by: category -> Add or remove user accounts -> create a new account. Please see if the problem occurs in this user account. If this isn't the case, we may transfer personal files to this account to solve the problem.

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  To generate thumbnails of your media, you can also download and install a third-party codec pack on your computer. Search using your search engine preferred for more information.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• connection failed when on my main.asc file .asc file loading

  Hey guys,.

  You have a very big problem here. I continue to get "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, I use the load() method in my code. I really don't understand why this happens, but when I comment the code that loads the CSA file, I can connect successfully to SGF. I can't understand what is happening here. BTW, I'm using fms4 in windows 7 32 bit.

  Any response is truly appreciated. Thanks in advance!

  Randy

  You can download the installer of FMS 3.5 and install it on a different machine and copy the folder I mentioned, and then remove the installation or if you want I can send that Opposite 3.5.3 installation I - give me your email id - I'll send it everywhere if you want.

• Load a CSV file into a table like in dataworkshop

  Workshop of data has a function to load a CSV file and create a table based on it, the same, I want to create in my application.
  
  
  
  I went through the forum http://forums.oracle.com/forums/thread.jspa?threadID=334988 & start = 60 & tstart = 0
  
  but not able to download all the files (application, package HTMLDB_TOOLS and PAGE_SENTRY function) could not find the PAGE_SENTRY function.
  
  AND when I open this link http://apex.oracle.com/pls/apex/f?p=27746
  
  I could not run the application. I've provided a CSV file and when I click on SEND, I get the error:
  
  ORA-06550: line 1, column 7: PLS-00201: identifier ' HTMLDB_TOOLS. PARSE_FILE' must be declared
  
  tried in apex.oracle.com host as shown in the previous post.
  
  any help pls..,.
  
  Another method to load data into the tables..., (as dataworkshop)

  Hello

  I have check app works very well.

  Have you read instructions?
  Load a CSV file in a table
  >
  Create a small csv file as

  col1, col2, col3
  VARCHAR2 (10), Number, "Number (10.2)" "
  Cat, 2, 3.2
  dog, 99, 10.4
  >
  First row must have valid column names. To verify that your first line of titles have no spaces or those who are not words reserved.
  Second line of the CSV file must have column of table data types.

  When you meet these requirements app works perfectly

  Kind regards
  Jari

• When you print color JPG files, everything comes out too blue

  Hello

  When I print a JPG file in the colour of the Photos app, they come out too blue. I have the latest version of the software installed on my iMac, so shouldn't the colors match exactly? Or what settings and controls should I do?  Thank you!

  Check your printer ink levels.

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to down load a pdf file, it is written in the computer talk. I think it's because the html editor is incorrect

  original title: pdf problem

  When I try to down load a pdf file, it is written in the computer talk. I think that this is because the html editor is incorrect, it is fixed to Notepad. can someone tell how to fix this?

  Notepad can not read the PDF. SumatraPDF download then install it . Download the exe file. Then run