When I plug my computer to load it always comes up with 5 updates on my mode of hibernation when I go to shut down my PC.

Similar Questions

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• When the unit is shut DOWN Satellite 2400 lock

  My camera is a 2400. Recently, when I try to shut down using Win XP it works until the message "windows will now stop." At this point, the image freezes with the pointer of the mouse in place. I installed a new HD with a new OS Win XP Pro. I downloaded all the drivers including Bios Update. It seems that my English is unsufficent bec I have to install via Boot Bios and turn on I have to hold down the TILDE KEY. What is c? If someone has encountered this problems of freezing closing system and if so what is the remedy? I also found a message from sys telling me the BASE SYSTEM DEVICE has a? What is a BASIC SYSTEM DEVICE?
  I appreciate your help in this matter. TNX and lots of XZEXZ ++? René

  [Edited by: admin on 21 January 06 11:17]

  Hello

  The base system device is usually drive card or PCMCIA slot or both. Some manufacturers of laptop to group a set of drivers and call "Chipset" even if it includes more than the chip set.
  I guess you didn't install the driver chipset or you have it install but in the wrong order. The chipset driver must be installed first.

  Well, windows want to stop because some background processes are running or due to a failed OS. I guess that this problem doesn't occur with the Toshiba Recovery CD because all the drivers are installed properly.

  On the procedure of BIOS:
  Please check this page from Toshiba. You will find an instructions how to upgrade the BIOS.
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  But please note: the incorrect BIOS or an incorrect procedure may damage the motherboard. First, you need to check if the new facility with the restore CD will solve the problem before you start the update of the BIOS!

  Good bye

• USB ports have power when the PC is shut down. Power supply connected to the battery.

  PC is HP G62 - 222us W7 64-bit.  When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop.  I can't remember have this option is found. Any help would be great.   Thanks in advance for your help...

  I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.

  Now, all USB PORTS are INACTIVE when the PC is shut DOWN.

• Satellite Z830-10J battery discharge when the system is shut down

  My new Toshiba Satellite Z830 10J ultrabook with Win7 64 bit. all updates, works fine and shows no anomaly, there is however a strange exception.

  When the battery is completely charded and I 'pull the plug', the system runs on the battery for sometimes more than 5 hours, so I guess that the cycle of the battery is ok.

  When the battery is now fully charged again and I SHUT down the system and not using it for a few days.
  Then the battery is completely DISCHARGED to 0%, and the system does not start, until I plug.

  This phenomenon occurs in less than a week. So: loading of the batrery 100%, turn the system off, pull the plug, want to re - use the system after 7 days, yields 0% battery charge.

  Is there a specific reason for this?

  Greetings

  Roland Schweiger

  > It appears that one of the BIOS settings (disabling the sleep_and_charge or disable WOL) solved the problem

  Great! Thanks for the comments!

• My computer does not work and comes up with message after I've click on the button for auto repair

  Hi my computer just stopped working when I turn it on it gives me the opition to repair or start normally once Ive clicked on the button for it to try to repair the computer which is recommended after a few hours, this message appears:

  Stop

  Unrecoverable system error

  Session manager failed to create patches pre protected

  System process stopped at unexpectably with a status of 0xc000003a

  System has been shut down

  Someone knows how can I get my computer working again please

  Thanks in advance

  Hi Charlenebaldwin,

  ·         Did you do changes on the computer before the show?

  ·         What version of the operating system is installed on the computer?

  ·         You are able to boot to the desktop or SafeMode?

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse.

  Method 2: Start your computer in last known good configurations.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 4: Run the Startup Repair tool and check if the problem persists.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 5: If the problem persists, perform a restore of the system recovery (winre) windows environment.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• Want to m6: 10 Windows my laptop restarts automatically when I click on shut down

  Initially, I had the common problem of my computer stops do not after upgrading windows 10. None of the solutions worked for me, I had no MEI version 11, I got the 9.5 version that does not apply to me. My computer always has a black screen while the power light and fan were still on. After that I followed the suggestsed improvements in the HP support, my computer was blocked is no longer about the closure, but won a new. Whenever I click on the windows, then the power then my laptop stop will be closed for a few seconds and then restarts automatically. I don't want to always hold the power button to turn off my computer. I tried also what does the power of sleep button to stop switching and the problem always arises. I also disabled automatic restart if the computer breaks down. I also tried things release so that they won't wake up the computer. I am very confused and that you can find the older forms of windows 7 and 8 only. I can't find anyone with my problem or a solution. Please help me.

  I tried to find aspecific sollution to your problem, but I could not. However, I found a forum of Windows poston with something similar, only on Windows 8. Maybe you can try and check if the sollution they gave this user works for you

  Here is the link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/Windows-will-not-shut-down-but-restarts-instead/56b2d6f6-5236-4b06-a386-3452506f549d

• My updates to the Web site and I can see on a phone, but when I try to view them on a computer my old site always comes back

  I have my domain through Godaddy, I created my site through muse, and I use the catalyst of the bus for the accommodation.  I published my new site and when I try to see it from a phone sometimes just how I want.  But when I try to see it from a computer, my old site.  Any suggestions as to what I can hurt?

  Thank you!

  Amber

  Clear the Cache of the browser on the desktop

  Jim

• My new computer has more updates of windows when I try to shut down my computer.

  I have a new (less than a week) computer with 1 g memory. Whenever I go to stop the computer it says that I've updated, I do not think a lot, but every day there are more updates, there are 28. I'm a little worried, because I can't stop to update and I don't know what they are for. I haven't added anything except Adobe Flash player with McAfee to play a game on Facebook.

  Jane,

  Try step 1: perform a clean boot as shown here:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  See if the updates install in clean boot state. If they do, then it is probably interference of 3rd party software that is originally from the slow update installation problem. The most likely candidate would be McAfee or other security software.
  MowGreen MVP Data Center Management - update of safety Consumer Services

• I can not all PDFs of my computer, when I try IE shuts down

  need help, either download or fix so that I can see PDF files

  Go to Adobe and download Adobe Reader: http://www.adobe.com/products/reader/ and intall it.  It should integrate with IE and when you try to open a PDF file in Internet Explorer, IE should use Adobe Reader to accomplish (everything in IE unless you copy the file in IE on your desktop or somewhere, then when you click on it it will open in Adobe Reader (not IE)).  You must close all open windows of IE when/before installing Adobe Reader, so it can integrate correctly.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wake On Lan doesn't work not to when the PC is shut down

  Hello

  I plug just the HP all-in - One 200-5110 win7 64-bit and I'm pretty happy with it, everything works fine and I finished the installation but I can't do the work of Wake On Lan (wol) when you clean shutdown of the pc.

  The Office uses the same cable, same switch port with my former 6 year old computer that had no problem alarm since the closure.

  The BIOS I see no parameters, the network card has the latest drivers on the HP site, and I think I tried all possible combinations of settings in network properties. The only way that Office wakes up correctly is to Hibernate or sleep state.

  Here are some screenshots of my settings:

  http://img713.imageshack.us/img713/1424/clipboard1k.jpg

  http://img14.imageshack.us/img14/8003/clipboard2tp.jpg
  http://img406.imageshack.us/img406/1/clipboard3.jpg
  http://img31.imageshack.us/img31/4227/clipboard4k.jpg
  http://img521.imageshack.us/img521/124/clipboard5.jpg

  Anyone have an idea on how to solve this problem? Did I miss something or an option?

  Thank you in advance.

  Kind regards
  Vassilis

  For WOL to work when the computer is OFF, this feature must be enabled in the BIOS > Power. If there is no option, this feature does not work when the computer is turned OFF.

• Upgrade Xp to Win7HomePrem pc. After installing Windows updates, stop. When back on immediately, shuts down immediately

  1 Compaq Presario R4000
  2. origin o/s - XP home
  3 custom upgrade to Windows 7
  4 Update 1.4 RAM / ram addl pending install (under keyboard)
  5A had several attempts to install, after doing the migration tool - finally Rep dupgrade
  6 IE 8 installed - could it be causing stop down? vs updates of victory?

  Had to restore point x 2 so far, can be 3 from a few minutes ago.
  As soon as it restarts, updates, it stops.  Must then sit for a while until I can turn back on continue.

  Hi FraninLV,

  Thanks for posting on Microsoft Answers!

  1. we will first turn off automatic reboot if this computer does not start all the time.
  1. disable automatic reboot
  1. when your computer starts its next reboot (black screen), keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  2. now, with your arrow keys, select Disable automatic restart in the event of system failure and press ENTER.

  Once you cancel this, provide us with the error log to fix this far.

  2. follow the steps below to provide the error log:
  1 type eventvwr.msc/s in the address bar.
  2. list all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '.
  3. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System').
  4. When you do so, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  Future prospects for the newspaper of the errors on your part.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• End of program-Microsoft Visual C++ Runtime Library... "this program is not responding. Keeps poping up when I try to shut down my PC.

  This post was coming since I had a virus removed a couple of weeks. I also have a message with it... "isuspm.exe - DLL initialization failed 'this application failed to initialize because the window station stops'

  The PC turns off after clicking on the "End Program Now.

  How can I fix these problems?

  We can think of two issues: the dll is corrupted one and two, there is a problem of hook in the registry. To fix the file, if that is the issue, you can run as an administrator command prompt and type "sfc/scannow". It will pass by and attempt to fix the system files from backups. If it works and does not solve the problem (even after a reboot), then it is time to move on.

  If it finds problems or cannot fix them, it is time to backup your data. I would like to make a priority

  If the problem persists, and if you have not installed all the programs that you absolutely need in since before the error, I would advise you to do a system restore to a date that you knew where he worked. This should fix any registry problems that could be the cause. Basically, the computer does not find the dll file.

  If you're still having problems, it's time to backup (just to be safe) and out the windows disc. Choose the option to UPDATE. It will not wipe your files or programs. It's simply bad never sure. Simply, it passes through and replaces windows. If you receive a message saying that you cannot choose this option because it is a version older than you currently use, don't panic. It simply means that you need to uninstall a service pack or two. After that, it should work

  PS:

  You said that it does not stop, so if you are disconnected or hold the power button, I begin with the restoration, since it is when your registry database records and you would have it corrupts with no way to check and fix the problem.

• Why my internet always comes up with "the connection was reset" and I can't load anything?

  We have 3 laptops in my house and me seems to be the only one who does, I don't know why it does that I didn't modify parameters on this at all and I thought I might be, but everything is always exactly the same as when I got it.

  Hello

  1. you are using a wired or wireless network?

  2. do you use Internet Explorer browser to surf the Internet? If so, which version?

   

  Method 1: reset the router and see if that helps:

  Note: To help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

   

  Method 2: See the article mentioned below:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:  Temporarily disable the antivirus software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 4: If you use the Internet Explorer browser, you can also try this.

  Reference:

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213/ro