TV not picking up the power supply laptop HDMI

Similar Questions

• HP compac q not to recognize the power supply cord.

  Tried the portable family factory restore, but failed "plug your laptop AC.

  The computer is plugged in with the power light on and is in charge of the battery.

  Help, please!

  HP Compac Q running Vista.

  Thank you in advance,

  Darren

  Remove the battery and leave the AC adapter is connected.

  Are you using recovery discs or try to use the F11 Recovery Manager?

  Please identify your laptop. For an example, see my signature. Include all alphanumeric characters.

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• Satellite L350-21F NO CONNECT the power SUPPLY

  The computer tells me in Windows it is not connected to the power supply, even if it is connected. I tried with and without battery, also the power icon is not lit, and now the battery is almost empty. The computer worked for the past 6 years and now all of a sudden what happens.

  Can you help me how to find which component does not work? What are the factors despite the adapter are possible because of this problem and how can I know?

  Thank you in advance.
  Elenktik

  Hello

  I think first of all you must check if the adapter is OK.
  The Satellite L350 requires a 6.32 A AC adapter 19V

  Possible part number: PA3290E-3AC3

• Satellite M30X: fans do not stop if plugged into the power supply

  Hello

  I have a M30X and months fans when I'm connected to the power supply do not stop. It's also stopping often enough. However, the laptop is not hot. Do you have any idea?
  Kind regards

  Armando

  Hello

  If you connect the adapter to the laptop of Toshiba power saver change consumption patterns. Maybe the power mode with a different setting in the a? Basic setupa?. Please check the cooling method and change it to lower the level.

  But of course, the dust and debris could have a bad influence on fan behavior.

• SAT L500D does not have to be connected to the power supply until the reboot

  Hi all

  I have a L500D, purchased locally and I have a problem that seems to escape correction by the helpdesk of Toshiba. My laptop while operating on battery comes with messages expected that the battery has x % remaining and suggests I plug the laptop into the power supply. I connect the laptop on the adapter and the power of the taskbar icon indicates the adapter is plugged in but it also shows that it does not load (adapter also remains cold, indicating no power is being developed). Low battery messages continue until the laptop stops ultimately. On commissioning again the laptop acknowledges that she attached to the adapter sector and charges upward.

  Helpdesk from Toshiba said a new BIOS version had been released and that I should update the BIOS and would probably "fix the problem". Went to the Australian Site and there is no other choice to see downloads for this model L500D [product number], helpdesk then took me on the European site where I updated the BIOS, then spent several hours on the phone with Symantec trying to uninstall and reinstall Norton 360, which ceased its activities and could not be uninstalled leaving my laptop not protected.

  Someone at - it an idea of what is the cause and how it might be remedied? Appreciate your thoughts.

  Hello

  If you have updated the BIOS and the help of t n right?
  Hmm I think that this problem of card mother s that looks like the adapter does not work correctly because everything is ok after new reboot
  I think the laptop is under warranty and you should get in touch with a local ASP to discover exactly what s wrong

  But I think that it s motherboard related question

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• System fails to recognize the power supply and will not charge the battery

  Had motherboard replaced but, before that, I had tried a secondary power to check if my principal could be faulty.  Card mother equipped now and all working fine except that I can't get the sytem to recognize my main diet.  Battery won't charge and the system stops if I remove the power supply.  This is on a DELL XPS M1530 laptop.

  Thanks for all the ideas.

  Hello

  Motherboard might not be properly installed or has problems - easy to miss a rider or
  any other connection as well.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite P100-347 does not stop when it is used on the power supply

  I have a new laptop of P100-347 games and I have 2 problems. Can anyone help?

  (1) when I use the usb port on the left side of the laptop, the laptop seems to restart the same time that I plug anything into it! I called Toshiba and said to update Bios, so I did (version 240 up to 330). But as soon as I did it started to the following problem:

  (2) when I run the laptop on battery, I can turn off the phone by pressing the power button or by clicking the windows locked. But as soon as I plug the power supply whenever I want to stop the laptop, the laptop just restarts. Does anyone have any ideas?

  Thanks for the comments!

• Improvement of the power supply for laptop

  The danger is that if the power supply cable is knocked out, the circuit board is broken.

  The connection of the laptop must be a cone. It could set magnetically or by using snaps.

  The laptop having a female cone and cord fitted with a male when cone struck with sufficient force should simply detach without damaging the laptop.

  Apple has already patented such a design and Microsoft use a variant of it for the shelf on the Surface.

• Pavillion G7 1263-nr: HP Pavillion G7 led beside the power supply plug flashes 3 times... does not illuminate?

  Unit does not illuminate. When the Start button / stop is pressed with power cord only or with the battery and the power cord or battery only I get 3 flashes of the white LED on the side of the unit next to the power supply.

  I replaced the receiver taken power in the change of unit No.....

  I used an other (workin) power cord and adapter... no change.

  I tried another battery (work)... no change.

  I pulled the two memory chips don't... no change.

  I put the two don't chip memory in one at a time... no change!

  I'm out of solutions short of replacement motherboard which is not profitable unless I want to take a chance on a reduced opportunity to the Board of Directors.

  Only the indication of all this work are three white flashes of LED is located just next to which DC adapter/cable plugs?

  Any other suggestions/diagnosis would be appreciated.

  Thank you!

  I had to contact HP and according to them the power port led flashes 3 times after pressing the power on button, indicates a failure of the motherboard and requires a replacement.

• Spectrum X 360 (N1W02PA #UUF): best practices for the use of the power supply battery for laptop (spectrum X 360)

  Hello.

  I know the best practice to use the power supply to charge the battery? I heard that keep charging your battery while using Notepad deteriorate autonomy. I don't know if that's true, but I do not charge my spectrum X 360 at 20% power level.

  Kindly need some expert advice. Thank you.

  Hello:

  My recommendation is to follow the instructions provided in this document from HP to address... paying particular attention to the info listed according to the recommended battery care practices.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c00596784

• I changed the power supply on HP Media Center m470n, because he wouldn't come, it will not

  the computer would not come, he ran but quit, I changed the power supply, but it will always fuel not at all, no fans no lights.

  Be, welcome to the forum.

  Because the computer is more than 8 years old, it is difficult to say which component has failed.  Open the box and give it a thorough cleaning.  Then, make sure that all components are installed and the power supply cord is free of defects.  Here's a guide for boot-up/shutdown/power problems.  Try what they say see if anyone of them help.

  Frankly, it may simply be time to buy a new computer.  You'd be amazed at how one faster cheaper computers will be.  Here is a that would be great just as configured.  It has a processor AMD Quad-Core (2.7 GHz), 6 GB of memory and the OS Win 7 64 bit.  You can buy a monitor, too.

• Get an error "the AC power adapter type cannot be determined" lack of the power supply or laptop AC adapter/Power Supply / load disconnected

  * Original title: error when the Power AC Adapter (DA130PE1-100) is unable to connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the i5-2450 M CPU @2.50 GHz. Intel processor recently passed 1 month, I noticed an error in the laptop lacks the power supply or laptop AC adapter/Power Supply / load disconnected

  Can you please let us know why the error is the filler and help us solve the problem.

  I have the DELL AC/DC adapter model number (DA130PE1-100) CN-0ju012-48661-22B-6WRV-A06

  

  Thank you

  Kalyan

  Kalyan,

  This could be hardware related.

  I suggest you to contact Dell Support and check if there is no hardware problem.

  Please update with the State.

• Inspiron 531 does not completely start upward after replacing the power supply?

  Hey people. This Inspiron 531 since 2007 and he has been a champion for me. In the past months, the power supply fan start getting real loud (intermittently) so I finally looked around and found the same feed Integrator Delta on ebay. Put him in this afternoon very carefully, but while doing the 'blue' cable hard drive that connects to the motherboard is out the motherboard. There are two connections on the motherboard, SATA 0 and SATA 3. I have no idea who it was so I tried it reconnection to SATA 0 (which was blue too) and all turned on. There, I sat on the DELL screen and no full boot. Shut down and tried the SATA 3 connector and basically the same thing has happened although there was some funky boss on the lower part of the screen and still no full boot.

  Any ideas or suggestions?

  Updated - I should also mention this power connectors P4 and P7 were not used until I swapped out.

  And also when I try and start I get the DELL screen that shows the F2 and F12 Boot Menu on the top right of the screen.

  jodeluxe

  The primary C: / SATA HDD, is connected to SATA 0 connector motherboard.

  Are the P1 24 pins and power connectors 4 pin P2, connected to the motherboard?

  Have you tried to remove and reinstall all the memory modules and the power data cables in front and all the readers and motherboard, to see if that makes a difference.

  Check the power LED button reading, is stable blue, flashing blue, Orange fixed, blinking Amber?

  Are there any 'beep', if there is, please publish the sequence of them?

  The Inspiron 531 Manual of use and troubleshooting is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-531_owner%27s%20manual_en-us.PDF

  Bev.