When ik mijn vista start squeeze ik steeds dat ik foundation.dll moet installeren, ik denk dat ik het doors heb per ongeluk, wat moet ik doen

Similar Questions

• When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?

  Original title: Msimbz32.dll

  Hello

  When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?
  Best wishes
  Hassan

  Hello
  Try the methods provided below and check if the problem persists.

  Method 1:

  Msimg32.dllis a file system in Windows Vista

  If you get the message when you open any program or when you start suggests that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Perform the clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

• IK heb per ongeluk verkeerd geboortedatum aangeklikt en mijn nu doe hij het niet hoe kan dat?

  en nu?

  Verify account problem https://forums.adobe.com/thread/1275549

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Start Up problem Boot\BCD error

  Husband has Vista, and when he's trying to start his computer he gets the following error message:

  File: \Boot\BCD
  Status: 0xc0000034
  Info: The Windows Boot Configuration data file is missing required information

  I have the same make and model laptop and I have no problem.

  Any suggestions please.

  This knowledge base document Microsoft might help you:

  + Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information" +. "
  http://support.Microsoft.com/kb/927391

  According to this doc the this error occurs when two
  The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
  The Boot\BCD file on the active partition is damaged or missing.

  See how to solve this problem.

  Good bye

• Satellite L30 - 105 - tapping Touchpad Vista start menu comes up

  Since I got my laptop (PSL33E) when I press the touch pad to select something sometimes the Vista start menu happens which is really annoying.

  Someone else had this problem?

  > When I press the touch pad to select something sometimes the Vista start menu comes up

  I think it is nothing unusual, because the area touchpad or corners can be configured to randomly.
  I recommend that you check the touchpad configuration and if you want to disable some annoying features or elements.

  The configuration of the touchpad should be found in the control panel-> mouse-> properties or advanced control.
  I do not exactly remember the way where to find these options.

  Play everywhere

• ox800704ec error code when I try to start my computer

  When I try to start my computer to receive an error code that says: "Windows has encountered a critical problem and will restart automatically in one. Please save your work now. "This happens whenever I try to start. Can you help me with this?  Paul @ (deleted number).

  Hello Paul,

  1. what version of Windows is installed on the computer?

  2 have had any changes made to the computer before the show?

  3. what security software is installed on the computer?

  Try these steps and see if it helps.

  Note: The links below are applicable to the Windows Vista operating system and Windows 7.

  Method 1:

  Step 1: Safe Mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the computer works fine in safe mode, and then follow step 2 and check.

  Step 2: Clean boot

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  1 run a scan for viruses on the computer safe mode with networking to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  2. run the malware removal tool from Microsoft.

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Hope this information is useful.

• After Windows Vista starts in a minute, or sometimes less my office goes from his normal self in a white pagecould someone please help me get back to my office?

  I tried to restart my computer, but only to get the same result, I tried to backup and resture but my computer tells me always that it is restureing the computer already. If someone can help or has had the same promblem I would like to know what I could do?

  Thank you

  Dave.

  Hello

  • You receive an error message?

  You can view these methods:

  Method 1:

  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.

   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  Method 2:
  You can always follow performance issues in Event Viewer that all error codes are followed here.

  Reference:

  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

• Black screen when logged into Vista

  Hello

  When I log in, I get a black screen with a cursor. Right now I am in safe mode to use this laptop.

  I don't remember install or update anything on computer that might have caused this problem.

  I also tried to open the Windows Task Manager and go to the processes tab and click right on the process explorer.exe and end, but I'm still having the same problem.

  I'd appreciate any help.

  Hello
  Welcome to the Microsoft community.
  Sorry for the delay in responding.
  Please follow the steps in this article and check if that helps.
  Windows Vista starts to a black screen with only the mouse cursor

  Hope that the information was helpful and let us know if you need more assistance. We will be happy to help you.

• failure of vista start

  My vaio fgn - fw preloaded with vista will not start in safe mode, safe mode with the mode networking, safe with fast co, repair mode, last known restoration goodd config, normally, dbugging etc., he was able to make a dx memory but failed to report after a reboot.  I have back up discs. How can I make them work with having the o/s?

  Hi Randall,.

  1. have there been recent changes to the computer before the show?

  2. what exactly happens when you try to start in the normal/Safe mode?

  3. you get any error message?

  I would recommend you to get in touch with the manufacturer of the computer to get the recovery or Windows Vista DVD disc.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check if you can able to boot.

  Method 2: What to do if Windows does not start correctly: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: Try all the steps except the re - install the Windows Vista operating system.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• When I try to start my computer, the Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Original title: cannot start my computer

  When I try to start my computer, the dead Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Hi WindowsxpUser,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".

  http://support.Microsoft.com/kb/922976

• Windows vista starts up on my dell inspiron 530 s.

  Windows vista starts up on my dell inspiron 530 s.  When I turn on my computer, I get a bootmng lack of press ctrl alt del to resart message.  When I put my vista disk in my cdrom and resart it only tells my no detected bootdevice.  help!!!!!!!!!!!!!!!!!!!!!!!

  Hello

  Try to use this information from Dell, including the F12 Diagnostics.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  See you soon.

• Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.

  Original title: windows cannot find c:\windows\system32\control.exe

  Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.

  Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• code 80070002 error appears during the update of windows vista starter

  During windows vista starter updated operating system, the 80070002 error code appears on the screen and could not update and install something. How to solve the problem? Product key-33qmg-pb76m-kbpwd-mbqd3-k6ggk

  Sylvie chandrasantra,

  80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698>

  05/14 / 1104:51: 22 am