When installing win7 migration software

How to keep or transfer all my current software off my HP laptop when or before doing a clean installation of Windows 7 not and the upgrade I have a rc og windows 7 and want to install but don't want to lose all my software that is preinstalled on my laptop which is running Vista 64 bit and will be upgrsading for Win 7 64 bit , what can do to reinstall this pre installed that came with my laptop I did the restore disks however those restore to version orifinal where my laptop was sent to me is not good ideas?

C:\swsetup contains driver and app installers. Copy what you want to keep this file on a dvd.

Tags: HP HP Software

Similar Questions

  • Blue screen when installing Win7-32 on 7.14 workstation (linuxhost)

    Hello!

    I installed VMWorkstation 7.14 (VMware-Workstation-Full - 7.1.4 - 385536.i386) on ubuntu 11.04 (32 bit, 2.6.38 - 11-generic-pae, ubuntu gnome classic) and you try to install a virtual machine the ultimate win7-32.

    When installing win7 - Setup stops with a blue screen, MEMORY_MANAGEMENT STOP: 0x0000001A.

    I tried different DVD Win7, but breaks up with the BSOD all the time installation and already checked the laptop computers (Lenovo Thinkpad x 201 (5413-FFG) 8 GB of RAM, they seem to be fine.)

    Also installed WinXP-SP3 without any problems in a virtual machine...

    No reference to what has gone wrong?

    Kind regards

    BigMac

    view the vmware.log which was created during this installation attempt

    affect you very little or too much RAM?

  • Stellite P500 - when installing Win7 Bluescreen rises

    Hello

    relative to my: Toshiba Stellite P500 - 127 PartNo PSPG8E - 01M009GR

    Once my laptop did not start more...
    so, I tried to repair with the DVD of MS - Win7... (he did not)
    so, I tried to format c: and set up a new Win7 (it did not work - Bluescreen at different times)
    so, I bought another DVD of Win7 - ((it did not work - Bluescreen at different times)
    so, I bought another HARD drive - (it did not work - Bluescreen at different times)

    My latest idea driver - and therefore my Question: are there drivers available for my device, which only gathers in the EXE files?

    many ways
    Neo.

    Neo can I ask you something:

    You have created recovery DVD toshiba s advice?
    If Yes, have you tried to install the OS by using this original toshiba recovery image?

    I installed image recovery and the version of the Microsoft OS several times so I P500 and it is really strange that you can not install Win7 on this model of laptop.

    Try to set the BIOS to the default settings and try to install the recovery image.

    Please send comments.

  • Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

    Hello!

    I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

    Version: PSLS0E-06T01KGR

    THX

    Now maybe stupid question but are you using the original installation disk Microsoft Win7?

    I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

  • "Load driver" error when installing Win7 on Satellite C665

    My hard drive in my laptop died on me, so I'm a new hard drive (Solid State) and installed Windows 7 top on my Toshiba (Satellite C665 model PSC55A)

    I don't seem to be the only ones to encounter this error: "A required CD/DVD drive driver is missing. If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now. "However, everyone seems to get for different reasons and I have tried several things.

    The first manifests itself: use the disk I got with the laptop. I moved homes since I bought the laptop. Looked through all the boxes in the House and and I think it can be lost in oblivion.
    The next most obvious: load the drivers of Toshiba support. Tried that. Does not work. Don't know why, but I downloaded the drivers from Toshiba, extract them, put them on a USB key. Seen in "Install Windows" in a list of all the drivers. I try to install each one, it passes through all. The end of it still does not work.
    Next: download Windows 7 USB/DVD tool. I read that this would work, so I tried it, and it didn't.
    I also read BIOS, 'Disable AHCI mode for your drive in the BIOS OF THE system controller', I'm not the greatest, so I can't have gotten this right step, but the only time where I found the AHCI in the BIOS I couldn't change to IDE or ATA as suggested, I could just change it to "compatibility".

    Thank you for your help, I hope I don't sound too desperate.

    > I found AHCI in the BIOS, I couldn't change it to IDE or ATA as was suggested, I could just change it to "compatibility".

    It's a good... you can switch the SATA AHCI mode or in compatibility mode.
    In AHCI mode laptop requires the SATA driver to see the SSD or HARD disk drive. In compatible mode HDD/SSD drive should be visible during installation of the system, but the HDD/SSD drive would operate in IDE mode means the player HDD/SSD would be slower.

    But if I understand the detachment, ve you had problems with CD/DVD player. Is this correct?

    It was really strange because installing Windows doesn t need drivers ODD (optical disc) the configuration of the installation contains common CD/DVD player that controls the disk drive.

    I read in other forums that this problem could be related to faulty Windows installation disc. It would be interesting to know if you can use another drive to install the system

    I also found this MS knowledge base article:
    ["Required the reader driver CD/DVD is missing" or "needs a driver your computer media is missing" appears when you install Windows | http://support.microsoft.com/kb/2755139]

    The reasons can be:
    The installation DVD is removed during the installation process.
    A bad quality DVD has been used to create the installation DVD.
    The speed at which the installation DVD is burnt was too fast.
    The DVD drive cannot read media.
    The ISO file is corrupted.

  • My laptop froze when installing win7 sp1

    The computer froze 8% full.  The display shows: step 1 of 2, Service Pack, 8% complete configuration, do not turn off your computer.  No error code, just frozen.

    Hello
    • What is the antivirus installed on the computer program?

    Step 1:
    I suggest you to disable any program of security on your computer and check if it solves the problem.
    After reviewing the question you must reactivate the security on your computer program.
     
    Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
     
    Step 2:
    I suggest that you put your computer in a clean boot, try to install service pack 1 and control.
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
    Reference:

    It will be useful. Let us know for help.
     
    Kind regards
     
    Ramata Thakur.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Fatal error 1603 when installing my printer software. How can I fix it?

    When I insert the disk to install my printer, the installation is interrupted with the fatal error 1603.  What is the solution?  I use Windows XP.

    Hi rlbass,
     
    -What is the brand and model of your printer?
     
     

    Try to reregister the Windows Installer Service, and then install the product again by following this step:

    a. in the menu 'Start', click on ' execute:.»
    b. in the "Open" box type "msiexec /unreg" and then press ENTER.
    c. on the menu 'Start', click 'run '.
    d. in the "Open" box type "msiexec/regserver" and then press ENTER.

     
    Check if this helps you.
  • Compatibility report when installing Win7 on laptop OS Ubunto

    Pretty much what the title says. I have a PC notebook Toshiba Satellite L300 - 16 L with 3 GB of ram upgraded, it was initially running Win Vista then I upgraded to Ubuntu 12.10 but my mother although windows is more suitable for her, so she asked me to replace Ubuntu with Win 7. If during the installation of win 7 I chose ' update now ' and I was brought to the compatibility page saying "'this start the computer using the installation disc." "Remove the drive and start Windows normally, then insert the disc and continue the upgrade" and could not continue the installation. I did some research and found a few forum thread such as 'This', I followed the solutions that people posted on the wire (uninstall drivers and 3rd-party programs) but always without success. Please help me.

    I appreciate any guidance you can give me.

    If you need more information, please just ask.

    Thank you very much
    -NG

    First of all, you can not pass an operating system based on Linux to Windows 7, they are incompatible, your only option is to do a custom clean install.

    If you have personal files in Ubuntu, you must save your file.

    Boot from the Windows 7 DVD

    To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

    http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • Get the object already exist error when installing adobe reader software

    I can't install Adobe application programs on my Windows 7 computer.  I tried Adobe Reader XI, 5.6 Lightroom, Photoshop CC, etc.  All permits with the error "the object already exists.  I searched on the Adobe site to fix, and it is to remove the Crypto file.  However, it resulted with the same error.  How can I install Adobe Reader?

    Update of Windows KB2918614 to the Windows Installer Service because of similar problems with other software.  You might want to try to remove this update (it will be installed near the time you started to have this problem).  Restart and try again to install the Adobe application.

  • Satellite A300 - restart of the equipment when installing Win7

    Hello

    I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
    It s is usually spent on extraction of the files step.
    Help, please

    PS
    It s not a hard drive, I have already replace without a bit of luck

    Hello

    You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

    However, to check if the default BIOS allows you to install Windows 7
    In addition, try to set the SATA mode in compatible mode or AHCI.

  • problem when installing win7 lack of mass storage driver

    Dear Sir

    I have a problem during the installation of win 7 in HP PAVILION DV6700

    This laptop has been using vista so I want to change to win 7

    his wonder MASS STORAGE driver

    so I need this driver to install windows7

    Thank you

    If you need drivers, follow these steps:
    1. in the run box, type devmgmt.msc.
    2 unknown devices would be listed as such and plotted with a yellow question mark.
    3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
    4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
    5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
    6. Please provide this number so we can offer you the appropriate driver.

  • Error code 0 x 80070750 when installing Win7 on an OEM DVD

    I bought a new DVD Win 7 to be instslled on a laptop computer with a new hard drive. The hard drive has been formatted to NTFS. No made partitionswere. After 80% of the entpacking error code 0 8007050 x. I have some forums, the problem must come from a default memoy. RAM from another laptop without success.

    What can I do else?

    First run Memtest86 +: 
    It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Test your player - create a Bootable CD:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
    Test your drive with the car manufacture utility.
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
    (bootable CD) and check bad sectors.
    SeaTools for information: http://www.seagate.com/support/downloads/seatools/
    SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
    SeaTools for DOS download:
    http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    J W Stuart: http://www.pagestart.com

  • A frozen (for more than an hour) when installing Win7 updates

    During the installation of updates during a restart, IQ506 froze, although few 'circle' still rotating, for more than an hour so far.  Message says not to put off, but nothing happens.  Where should I go from here, if I am not in power down?

    A few times just to give up and put off, I look at the HD indicator, if it goes 30 minutes without blinking I give him a strong power off, if the HD is flashing I will usually let it run all night

  • Laptop 15-AD129DS: installed Win7 on 15-AD129DS-lack of Driver: Acquisition of PC data and Signal Processing controller

    I recently installed Windows 7 on my laptop HP 15-AD129DS.  In the Device Manager miss me the driver for PC Data Acquisition and Signal Processing controller.   There is also an unknown device without driver right below in the section "other devices."

    I understand that this ususaly installed with drivers from the chipset.  But it didi not install in two different tests when installing Win7.  The Intel site seems to be of no assistance, or their driver utility.

    Can you lead me to the correct drivers?

    Thank you in advance,

    Mark

    Hello:

    Have you tried this driver?

    This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

  • Not able to install the HP software after a clean install of win7, hpbi and harddisk.dll error

    Hello

    I bought a tm2 with win7 home x 64, my IT guy at the office have installed win7 ultimate x 64 and of course all the HP software was missing when I returned. Fortunately, they recorded the old files and I was able to locate the SwSetup folder and managed to install essential drivers.

    However, I miss all the HP software, which means that I can no longer find it not in the SwSetup folder or it will not be installed. I found the HP Touch Smart 'something' Center (folderHPTSLC) but I get the error "hp\bin\hpbi" and I found the Recovery Manager win7 HP homepage, but I get the error "hardDisk.dll.

    I am really a bit upset that I have to spend so much time to solve a simple problem, I have an intact recovery partition, a partition HP tools intact as well as all the files in the SwSetup folder, how can it be difficult?

    I want the software I paid and so far, I spent several hours looking for a solution to a seemingly simple problem (just provide the software on your hp, or at least one that reinstalls the Sw from the hard drive to the HP computer if you fear that your software may be used on other HP computers...).

    Can someone please provide me with is the solution to the problems mentioned above, a link to the HP Touch Center application work (although I have the files, he just moved there) or tell me how I can restart the installation of the HP software and driver that happens just after you have configured your win7?

    Thank you

    Geen

    I agree, our IT screwed up guy, they didn't even know the upgrade thing... :-/

    In any case, I found a way to install the software I was looking for, just unzip to a folder and run the .msi file in the src folder.

    Even if not all the applications had such a record, most of 'em had.

    After playing with the sw a bit, I realized that I didn't like it anyway, boy I'm glad, I wasn't going to come home!

    and btw, we bought a HP Mini and it was a nice little software, called AppInstl in his swsetup, actually just the sw file I was looking for. Of course the same thing happened with the Mini ('clean' installation), but with this app, that I managed to re - install all the sw I wanted without any problem, except QuickWeb, of course, but that seems to be a general problem.

    Seems to me that HP has also seen the need for a "easy install your software after clean install" app.  :-)

    Thanks for all your comments, my problem was solved!

    Rgds,

    Geen

Maybe you are looking for

  • Why Gmail Help does not not on Firefox?

    When you use Firefox now I don't see Gmail Help. Everything looks like in scrambled.When I use Google Chrome instead everything works fine. I am alerted on this issue and to know what is happening when a friend sent me an email that I could not read

  • Deleted chat history.

    I want to recover my deleted chat history

  • Re: Keyboard and touch pad do not react on Satellite A300-20 q

    Hey everybody! I have a following problem. Keyboard and touch pad has become inadmissible without reason (at least I don't know why--I didn't install new software at this time here).When I try to charge my cell phone that it never closes, unless I pu

  • Block cursor?

    Hello, just turned on HP mini 110 1030NR running Windows XP Home edition of the husband.  Purchased in 2009, very limited use, not programs never added.  Nothing new at all in setting up the plant.  The computer starts correctly, but the first moveme

  • my system shows an error with the disc of windows-no legend

    my xp os will be faced with a problem that shows with the legend "windows-no disk", and the error code is "exception processing message c000013 parameters 75b6bf7c 4 75b6bf7c 75bf7c".