Compatibility report when installing Win7 on laptop OS Ubunto

Similar Questions

• Blue screen when installing Win7-32 on 7.14 workstation (linuxhost)

  Hello!

  I installed VMWorkstation 7.14 (VMware-Workstation-Full - 7.1.4 - 385536.i386) on ubuntu 11.04 (32 bit, 2.6.38 - 11-generic-pae, ubuntu gnome classic) and you try to install a virtual machine the ultimate win7-32.

  When installing win7 - Setup stops with a blue screen, MEMORY_MANAGEMENT STOP: 0x0000001A.

  I tried different DVD Win7, but breaks up with the BSOD all the time installation and already checked the laptop computers (Lenovo Thinkpad x 201 (5413-FFG) 8 GB of RAM, they seem to be fine.)

  Also installed WinXP-SP3 without any problems in a virtual machine...

  No reference to what has gone wrong?

  Kind regards

  BigMac

  view the vmware.log which was created during this installation attempt

  affect you very little or too much RAM?

• "Load driver" error when installing Win7 on Satellite C665

  My hard drive in my laptop died on me, so I'm a new hard drive (Solid State) and installed Windows 7 top on my Toshiba (Satellite C665 model PSC55A)

  I don't seem to be the only ones to encounter this error: "A required CD/DVD drive driver is missing. If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now. "However, everyone seems to get for different reasons and I have tried several things.

  The first manifests itself: use the disk I got with the laptop. I moved homes since I bought the laptop. Looked through all the boxes in the House and and I think it can be lost in oblivion.
  The next most obvious: load the drivers of Toshiba support. Tried that. Does not work. Don't know why, but I downloaded the drivers from Toshiba, extract them, put them on a USB key. Seen in "Install Windows" in a list of all the drivers. I try to install each one, it passes through all. The end of it still does not work.
  Next: download Windows 7 USB/DVD tool. I read that this would work, so I tried it, and it didn't.
  I also read BIOS, 'Disable AHCI mode for your drive in the BIOS OF THE system controller', I'm not the greatest, so I can't have gotten this right step, but the only time where I found the AHCI in the BIOS I couldn't change to IDE or ATA as suggested, I could just change it to "compatibility".

  Thank you for your help, I hope I don't sound too desperate.

  > I found AHCI in the BIOS, I couldn't change it to IDE or ATA as was suggested, I could just change it to "compatibility".

  It's a good... you can switch the SATA AHCI mode or in compatibility mode.
  In AHCI mode laptop requires the SATA driver to see the SSD or HARD disk drive. In compatible mode HDD/SSD drive should be visible during installation of the system, but the HDD/SSD drive would operate in IDE mode means the player HDD/SSD would be slower.

  But if I understand the detachment, ve you had problems with CD/DVD player. Is this correct?

  It was really strange because installing Windows doesn t need drivers ODD (optical disc) the configuration of the installation contains common CD/DVD player that controls the disk drive.

  I read in other forums that this problem could be related to faulty Windows installation disc. It would be interesting to know if you can use another drive to install the system

  I also found this MS knowledge base article:
  ["Required the reader driver CD/DVD is missing" or "needs a driver your computer media is missing" appears when you install Windows | http://support.microsoft.com/kb/2755139]

  The reasons can be:
  The installation DVD is removed during the installation process.
  A bad quality DVD has been used to create the installation DVD.
  The speed at which the installation DVD is burnt was too fast.
  The DVD drive cannot read media.
  The ISO file is corrupted.

• Stellite P500 - when installing Win7 Bluescreen rises

  Hello

  relative to my: Toshiba Stellite P500 - 127 PartNo PSPG8E - 01M009GR

  Once my laptop did not start more...
  so, I tried to repair with the DVD of MS - Win7... (he did not)
  so, I tried to format c: and set up a new Win7 (it did not work - Bluescreen at different times)
  so, I bought another DVD of Win7 - ((it did not work - Bluescreen at different times)
  so, I bought another HARD drive - (it did not work - Bluescreen at different times)

  My latest idea driver - and therefore my Question: are there drivers available for my device, which only gathers in the EXE files?

  many ways
  Neo.

  Neo can I ask you something:

  You have created recovery DVD toshiba s advice?
  If Yes, have you tried to install the OS by using this original toshiba recovery image?

  I installed image recovery and the version of the Microsoft OS several times so I P500 and it is really strange that you can not install Win7 on this model of laptop.

  Try to set the BIOS to the default settings and try to install the recovery image.

  Please send comments.

• Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

  Hello!

  I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

  Version: PSLS0E-06T01KGR

  THX

  Now maybe stupid question but are you using the original installation disk Microsoft Win7?

  I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

• My laptop froze when installing win7 sp1

  The computer froze 8% full.  The display shows: step 1 of 2, Service Pack, 8% complete configuration, do not turn off your computer.  No error code, just frozen.

  Hello
  • What is the antivirus installed on the computer program?
  
  Step 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
   
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
   
  Step 2:
  I suggest that you put your computer in a clean boot, try to install service pack 1 and control.
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  Reference:
  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  It will be useful. Let us know for help.
   
  Kind regards
   
  Ramata Thakur.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• When installing win7 migration software

  How to keep or transfer all my current software off my HP laptop when or before doing a clean installation of Windows 7 not and the upgrade I have a rc og windows 7 and want to install but don't want to lose all my software that is preinstalled on my laptop which is running Vista 64 bit and will be upgrsading for Win 7 64 bit , what can do to reinstall this pre installed that came with my laptop I did the restore disks however those restore to version orifinal where my laptop was sent to me is not good ideas?

  C:\swsetup contains driver and app installers. Copy what you want to keep this file on a dvd.

• Satellite A300 - restart of the equipment when installing Win7

  Hello

  I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
  It s is usually spent on extraction of the files step.
  Help, please

  PS
  It s not a hard drive, I have already replace without a bit of luck

  Hello

  You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

  However, to check if the default BIOS allows you to install Windows 7
  In addition, try to set the SATA mode in compatible mode or AHCI.

• problem when installing win7 lack of mass storage driver

  Dear Sir

  I have a problem during the installation of win 7 in HP PAVILION DV6700

  This laptop has been using vista so I want to change to win 7

  his wonder MASS STORAGE driver

  so I need this driver to install windows7

  Thank you

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Error code 0 x 80070750 when installing Win7 on an OEM DVD

  I bought a new DVD Win 7 to be instslled on a laptop computer with a new hard drive. The hard drive has been formatted to NTFS. No made partitionswere. After 80% of the entpacking error code 0 8007050 x. I have some forums, the problem must come from a default memoy. RAM from another laptop without success.

  What can I do else?

  First run Memtest86 +: 
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• A frozen (for more than an hour) when installing Win7 updates

  During the installation of updates during a restart, IQ506 froze, although few 'circle' still rotating, for more than an hour so far.  Message says not to put off, but nothing happens.  Where should I go from here, if I am not in power down?

  A few times just to give up and put off, I look at the HD indicator, if it goes 30 minutes without blinking I give him a strong power off, if the HD is flashing I will usually let it run all night

• Laptop 15-AD129DS: installed Win7 on 15-AD129DS-lack of Driver: Acquisition of PC data and Signal Processing controller

  I recently installed Windows 7 on my laptop HP 15-AD129DS.  In the Device Manager miss me the driver for PC Data Acquisition and Signal Processing controller.   There is also an unknown device without driver right below in the section "other devices."

  I understand that this ususaly installed with drivers from the chipset.  But it didi not install in two different tests when installing Win7.  The Intel site seems to be of no assistance, or their driver utility.

  Can you lead me to the correct drivers?

  Thank you in advance,

  Mark

  Hello:

  Have you tried this driver?

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• then restart the laptop but when installing loading file comes portable stop and start again, then window 7 starts with the non-genuine version

  * O.T. > genuine os

  I real operating system of Windows 7 when I get the window update 10 at that time there I download laptop is restart but when installing password file loading then laptop stop and try again and window 7 is then start with no authentic version what to do to get a license back I know product key unique for this window I don't strip license the back of the laptop or not just any what CD what do I do

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• I have installed Compatibility reporter my Skype add in would work. Now every time I have start fire fox I get and error componets.classes['@softage.ru/skypeFfextesion;1 "] is not defined." How can I not this error? Thank you

  I used to use Skype to call directly from firefox. Double click on the number. It has stopped working. Support told me to allow the compatibility reporter, but now, I still get the error that I explained in the question

  This is an indication that the Skype extension does not work properly.
  
  You can force an extension to install, but this does not mean that the extension works, you need to delete Skype and wait for an update.

• I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit

  I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit. My question is this...

  "My laptop HP550 with a 1.8 bicoeur processor will accept A Windows 7 64 bit operating system or should I stay with a 32-bit operating system." Any help will be greatly appreciated

  Yes, you will be able to run Windows 7 64 bit on this system, but it may not be quick.

  -Your processor supports 64-bit.

  -2 GB or more of RAM is recommended for the 64-bit version of Windows.Check your.

  You need to install Windows 7 64 bit only if you have a reason behind choosing him over 32 bits. Personally, I would recommend that you use the 32-bit Windows.