When the computer starts I sterted, thunderbird (was used for years). All my email accounts and messages disappeared! What should I do?

Similar Questions

• How can I configure numerical Lock ON when the computer starts?

  I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

  Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

  Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

  PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

  THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

  HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

  .
  
  Bob_in_PGI

  I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

  I now have Windows 7 64 bit.

  There must be someone who knows how to do this.

  Bob in PGI

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• Node Manager does not restart the WebLogic servers when the computer starts

  Hi all
  
  I'm testing the new WebLogic Server version as well as of new forms and reports. I don't have much experience with WebLogic (using the Internet Oracle 10g Application) bare with me for a moment.
  
  I'm using Node Manager to start admin server and all the other managed servers. I also installed nodes as a Windows service manager and configured the boot parameters to include Xrs-/-Xnohup, as stated in the documentation and everything seems to work fine until I restart the server. Node Manager service starts and according to his diary, he plays startup.properties of each server, but it does not start them. Am I missing something here? I found myself in an impression that Node Manager must restart the server in case of reboot system, if the server was running when the computer has been restarted.
  Even though I don't have much experience with WebLogic, I'm not a beginner. I managed to migrate (for testing only) all the business application (more than 1000 forms and reports) of iAS 10g to the new version in two days. Application works very well and I only have problems with servers to start when the computer starts using Node Manager.
  
  Test environment:
  Windows 2008 Standard 32-bit
  RAM: 2 GB
  HARD DRIVE: THE 140 GB
  CPU: 2xXeon

  # nodemanager.properties
  ...
  CrashRecoveryEnabled = true
  ...

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Software HP C4380 printer causes delays when the computer starts.

  I don't know what triggered the problem. I had unplugged the printer and reinstalled. Now, when the computer starts, it hangs for 2-3 minutes seeking a device to the USB location 0. That remove the HP software solves the problem. I installed with the latest HP drivers and tried to use only the printer drivers without the scanner software. If I avoids the HP software, Windows installs with a Jungo win driver that causes the same result. It could have been an update of my Windows XP Home SP3 in the meantime I demolished the printer and reinstalled, but I can't follow any other changes.

  Now the printer is useless because of this problem. HP forums suggested disabling a program of tracking of HP under Services.msc, but who has also failed to solve the problem. Any suggestions?

  check the clean boot state, this might help you http://support.microsoft.com/kb/929135

• How to remove temporary files, waiting to be written to disk when the computer starts? __

  How to remove temporary files, waiting to be written to disk when the computer starts?

  Hi Reasman,

  Welcome to the Microsoft answers site!

  To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

  You can manually delete the files that are stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• Windows Defender will stop when the computer starts

  Windows Defender goes off when the computer is started and occasionally when the computer is running. I bring up the Control Panel icon, click on restart and restart the program. I had this problem for a week but have not added new software for a fortnight. Everything ran happily until a week ago. I am running Windows Vista Home Basic on a Packard Bell Imedia 3312 UK computer, purchased in April 2009

  Are you by chance using AVG 9.0 for your antivirus package? This version of AVG 9 automatically extinguished Windows Defender. Microsoft® Security MVP, 2004-2009

• Black screen when the computer starts.

  Original title: Windows startup

  Since today, when I start my computer (windows 7), he crosses to the Welcome to windows screen, then goes to a black screen with just the active mouse - no office. I used ctrl-alt-del and looked at the running processes. There were 2 'runonce' process running, and when I stopped one, it is loaded on the desktop. This happens everytime I turn on the computer. Is there any solution for this?

  Hello

  Thank you for visiting Microsoft Community.

  From the description of the problem, I can understand that your computer goes to a black screen after login. I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you right click the mouse on the black screen. Do you get the options?
  2. What is the brand and model of your computer?

  Especially this problem appears due to lack, corrupt or incompatible display driver problem, however, there may be other causes as third-party programs collide, virus/malware etc as well attack.

  You can try these methods mentioned below and check if it helps:

  Method 1: Please follow the suggestions listed in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Method 2: I suggest you to run Microsoft Safety Scanner to search for viruses and malware and remove if necessary.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Windows 7: no start button or taskbar when the computer starts

  Original title: Black screen and the taskbar and the start to the Start button

  At the start, I had a black screen with no tasks or start bar button. Just the pointer and remote area was visible. (I have a dial-up connection and sometimes when I start remote poster on his own area right after the desktop). I could not access the boot menu. I don't know how he has become black because I left after that I turned on the computer. I pressed the power button. When I did I got the light blue screen that says it would close down and he stopped normally. When I rebooted I had no problem and he has not done since.

  I not made any changes to the computer except change the desktop wallpaper several times for a long time.

  Can someone tell me what is the problem with my computer so I can fix it so this or something worse will happen?

  Thank you

  Hello misha38,

  After proofreading by the wire, it looks more like a hardware/driver problem. Have you tried updating your video driver from your computer manufacturers Web site? Please visit the website of the manufacturer of your computer to locate and install the correct driver.

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FF opens without me it starts when the computer starts with unwanted Bing or tabs tab

  When I start my computer, sometimes FF starts by itself and there are tabs Bing 1 or no longer desired. It seems to occur only when the date has been changed, never for a second time on the same date. Please answer in simple and plain English.
  Thank you
  Bernadine

  
  

• Bluetooth is no longer automatically when the computer starts

  I have the battery Bluetooth version 2.01.21.1. It was working fine. When the laptop booted, the bluetooth mouse was connected automatically.
  All of a sudden the icon will automatically appear in the system tray and I so manually connect the mouse every time
  It is still listed in the desktop Start menu, and it is always checked at startup in the msconfig.
  How can I fix it?
  Thanks in advance

  Hello Andrew

  Try to remove preinstalled Toshiba BT stack and after mobile download page restart install the most recent version of Toshiba.

• HP 8620: Printer in offline mode when the computer starts

  My 8620 Officejet is offline.  It is connected via a cable to my 360 spectrum HP network.  When I turned off the computer and start that he even once, the printer starts in offline mode - for example, when I got to print from Microsoft Word (Office Pro 2016), the printer is 'offline' in the Word print dialog and I get a message from Windows system, saying printer offline - and nothing prints.

  I can solve it with the help of HP print and Scan doctor.  But if I closed the computer and start it up again, it is new offline.

  I can fix this by going to the printer by pressing the button on the front power off and then restarting it - the document in the print queue print immediately.

  Also, if I start the Server Web part, select 'Tools' and then click 'Print a self Test Page', the page prints as usual. However, if I then go back to Microsoft Word, the printer remains offline.

  HP Printer Wizard starts well and the analysis of function of Document or Photo works very well.

  It's just the feeling that is not.

  Any ideas gratefully received.

  Thank you
  Philippe

  Hi @Philip4,

  Welcome to the HP Forums!

  I noticed that your HP Officejet Pro 8620 keeps going offline. I'm happy to help you!

  Please, try the steps in this guide, "offline" Status Message printer (Windows 10), as well as this guide, the printer is not maintaining the wireless connection.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these guides help!

• asks to reinstall hpzjrdoi.dll when the computer starts?

  How to install this to get rid of it, when I start computer. Do I need this on my computer. How can I get rid of it if I do not need. Thank you, Charles Harrison
  Operating system: Windows XP

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html