When using 'playbackwards()' can not see movie next time I want to play.
Hi all
I'm banging my head here:
I have sound cues in an audio file that make clips interpolated to play. (They change alpha state so that they fade upward). When I melted that I also melted down from the previous image using 'playbackwards() '.
However, I need to repeat images and it seems that if I use "playbackwards()" on a clip from the movie, I don't see when I try to play()' it back (to the front again of reading).
If I do just the previous image invisible when she shows the following image, the previous image will show next time I need to play... Just, I can't use 'playbackwards()' to this topic if I need to replay this clip from movie.
Here are some of my code:
Cue point
function onCuePoint(event:CuePointEvent):void
{find the movie clip asociated with the string name of the wand in the BO
for (var faceImg: * in faceImgs) through all mdImgs //run
{
If the signal sound string faceImg string name = name
then dissolve until the MC faceImg and dissolve to the bottom of the current faceImg, if there is avar newFaceName: String = faceImgs [faceImg];
If (event.name == newFaceName) //Find the faceImg MC which is the name of landmark
{
dissolve until the new faceImg
faceImg.visible = true;
faceImg.play (); face dissolves upward
trace ("" faceShowing: "+ faceImg");
dissolve in the current faceImg
currentFaceImg.playBackwards ();
currentFaceImg.stop ();
currentFaceImg.visible = false;
trace ("previous Img:" + currentFaceImg);
The new faceImg becomes the "current" faceImg
currentFaceImg = faceImg;
}}
}
I posted the folder with the FLA in question (and sound cue files, etc.) here:
http://home.Comcast.NET/~samiri/Director/TEST_soundCues.zip
Any help is greatly appreciated.
as mentioned in the message 5, you must finish this loop:
Stop();
function playBackwards (): void
{
addEventListener (Event.ENTER_FRAME, enterFrame);
}function enterFrame(e:Event):void
{prevFrame();
{if(this.currentFrame==1)}
removeEventListener (Event.ENTER_FRAME, enterFrame)
}
}
Tags: Adobe Animate
Similar Questions
-
I have an archive pretty extensive e-mail that I keep in one of my email accounts on my laptop XP in a folder that is named "Inbox_Store". I'm migrating to a laptop 8.0 to win and that you copied my e-mail profile on according to the instructions from the Web site. I see, and you can use email accounts 3 that I had, but I do not see the mail folder structure I had previously in one of the E-mail accounts. Any help would be greatly appreciated.
How do transfer you the former? Have you used any tool?
I use ImportExportTool and it can export and import with subdirectories intact
https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/ -
using Mail can not see the previews
Once we have closed the it, we do not seem to raise the window split to display previews of emails from the point in low bar using the classic in OSX 10 11.6 display (or on another Mac 10.11.4)
You must click and hold on the point and make it to lease Midway to the top of the screen before you let go.
It goes same for the unconventional view, except that you have to slide right in to the middle of the window.
-
I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please
Hi debg25514049,
You will not be able to export your PDF to PPT using the service Adobe export in PDF format.
You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.
Kind regards
Nicos -
When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?
Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."
-
Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.
There is no serial numbers for products Creative cloud,
Sign out of Creative Cloud App and sign in the back once
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
If the trial warning still appears, then make sure your hosts file once entries
Log, activation, or connection errors. CS5.5 and later versions
-
I downloaded yesterday 4 services including target word Cup side bar, but can not see.
I activate 4 services, Goal.com , Saavan sidebar and Pocket which I down loaded yesterday, but only can not see.
You can update to Firefox 30? There's a new toolbar button in Firefox 30 to make it easier to show the sidebars. If you want to try, you can use either:
- button "3-bar" menu > "?" button > on Firefox
- (menu bar) Menu help > about Firefox
Firefox should check updates when you open this dialog box.
Or, stick to 29 of Firefox, you can see the view menu. If you do not ordinarily classic menu in the top bar display, you can press the Alt key or press the F10 key to temporarily show. Try:
View > sidebar
and check the desired box it.
-
Skype to the Japan number - call is OK but call the receiver can not see my number
Hi all.
Today I received number of Skype to the Japan, receiving another appeal is OK but when bringing in another receiver can not see my number. I went to the caller identification settings and cannot see the Japan in the list, while number of Skype to the Japan cannot do that, right?
Thanks for reading.
Update: I received Skype confirmatiom. It is correct. Caller ID cannot be used in the Japan.
-
Microsoft Visual C ++ Runtime Error - can not see the path of the file.
When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.
All it says, this is:
Runtime error!
Program: C:\Program F...
How can I extend the above so I can see the path of the actual file?
Also going to go for a 2 for 1 here...
Immediately after the closure of the runtime error box, I get the message that search settings stopped working. I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place. I run Windows 7 Ultimate.
Error information:
Signature of the problem:
Problem event name: APPCRASH
Application name: SearchSettings.exe
Application version: 4.5.0.2
Application timestamp: 4e04ab86
Fault Module name: MSVCR90.dll
Fault Module Version: 9.0.30729.4940
Timestamp of Module error: 4ca2ef57
Exception code: 40000015
Exception offset: 0005beae
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Information additional 1:9956
More information 2: 995611374799875ff43c42d4b1b84d70
3 more information: 3d4b
Additional information 4: 3d4b4db0455ea2295d172b959897673cMaybe just download a new MSVCR90.dll but I would like to hear what you have to say.
Hello
· Did you the latest changes on the computer?
We must first identify to identify the program that is causing startup problems.
Step 1:
Check if the problem persists in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Restart the computer to return to normal mode.
If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
Step 2:
I suggest that you put the computer in a clean boot state and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
Hello
I want to know when we can not see XML
Thank you
If you look closely the XSLT generated in JDeveloper contains a code snippet XML commented code on the top, which contains the locations of source and target schema. This code snippet is used by Jdeveloper to show the XSL in designer view. But if you deploy the same XSL to the SOA server and extract the code again, you would lose these extracts xml, because on the server, they are nothing more than comments. In case, you want to redisplay the XSL in graphical mode, you must give those commented extracted XML into XSL.
Hope this helps :-)
-
Hi all
I CREATED THE TRIGGER TO CHECK NOM_ELEMENT BEFORE UPDATE ON THE T_ITEMS TABLE IF AN ANOTHER NOM_ELEMENT LIKE NOM_ELEMENT CURRENT OR NOT, IF AS AN ANOTHER NOM_ELEMENT DON'T SAVE UPDATED CURRENT NOM_ELEMENT.
MY NO IS:
1 - I CREATED the FUNCTION CALL CH_UNIQUE_ITEM_NAME
CREATE OR REPLACE FUNCTION CH_UNIQUE_ITEM_NAME
(NUMBER OF P_ID, P_ITEM_NAME IN VARCHAR2)
RETURN NUMBER
AS
NUMBER OF X_COUNT;
-FUNCTION "CH_UNIQUE_ITEM_NAME" TO CHECK NOM_ELEMENT LIKE OTHER NOM_ELEMENT OR NOT.
BEGIN
SELECT COUNT (ITEM_NAME)
IN X_COUNT
OF T_ITEMS
WHERE ID! P_ID =
AND UPPER (ITEM_NAME) AS UPPER (P_ITEM_NAME);
RETURN X_COUNT;
END CH_UNIQUE_ITEM_NAME;
2. I CREATED TRIGGER CALL TRG_CH_UNIQUE_T_ITEMS
CREATE OR REPLACE 'TRG_CH_UNIQUE_T_ITEMS' before FIRING
UPDATE
ON T_ITEMS FOR EACH LINE
DECLARE
NUMBER OF X_CHECK;
BEGIN
SELECT CH_UNIQUE_ITEM_NAME (: OLD.ID,: NEW.) NOM_ELEMENT) IN DOUBLE X_CHECK;
IF (: NEW.) NOM_ELEMENT DISLIKES: OLD. Nom_element AND X_CHECK > 0)
THEN RAISE_APPLICATION_ERROR (-20007, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX");
END IF;
END;
NOW WHEN I UPDATE ANY ITEMS FOUND ERROR "ERROR / T_ITEMS in the TABLE is changing, function of triggering/can not see ORA-06512.
Please help me TO RESOLVE THIS ERROR. I TIRED TO SOLVE...
Thank you
You don't realize that you have just set a UNIQUE INDEX of several columns?
create unique index index_name_uq on table_name( user#, upper(item_name) );
In addition, a GUI Design point, (using the terms of the APEX) that you want to validate the data before submit you.
(use a Page-level Validation)
MK
-
Trigger that avoids "is changing, function of triggering/can not see ' error
Version Oracle 11.2.0.2
I have a problem where I try to avoid duplicates in a table using a trigger. Data looks like:
EQUIP LO ACCT
---------- -- ----
1000000000 0
1000000001 0
1000000002 0
1000000003 0
1000000004 0
Equipment = equipment identifier
Location = location number
Acct = account associated with the equipment
I need avoid the same account to have 2 pieces of equipment are allocated to the same location.
for example
EQUIP LO ACCT
---------- -- ----
1000000000 1 1234
1000000001 1 1234
1000000002 0
1000000003 0
1000000004 0
I can't create a unique index for this table that when there is no assigned equipment (first example) I couldn't have uniqueness through the location and number. So, I wrote the following:
CREATE or REPLACE TRIGGER TEST_TRG before update of test WE acct
Old SEO AS OLD AS new NEW
for EACH LINE
DECLARE
v_chk number: = 0;
BEGIN
Select count (*) in the test v_chk where acct =:new.acct and rental =:new.location;
IF v_chk > 0 then raise_application_error ("-20001, ' multiple devices at the same location not allowed");
END IF;
END;
/
.. but of course that I'm shot in the table that is being updated, I get the error of mutation:
setting a day of test set acct = "1234", location = '1' where equip = '1000000001'
*
ERROR on line 1:
ORA-04091: table xxx. TEST is changing, function of triggering/can not see
ORA-06512: in "xxx. TEST_TRG', line 4
ORA-04088: error during execution of trigger ' xxx. TEST_TRG'
I tried this split into two pieces where a trigger calls another procedure to perform the check and write error, but results were inconsistent and end-user demand does not pick up the error for a reason - it seems to process the transaction very well even if the update was not made at the table level.
Are there other ways in addition to a trigger to achieve?
Thank you!
Adam
Monty77 wrote:
... I can't do this, acct is not a null value, it is ' '. Right or wrong it is not editable as integrated in application logic.
Thank you!
Adam
Then also consider this value in your index of function according to:
create table test
(
equip the varchar2 (10),
location varchar2 (2),
ACCT varchar2 (4)
);
CREATE a UNIQUE INDEX TestLocationAcct_UK ON Test
(case when the ACCT is not null ACCT AND! =' ' then location |) « ; » || end of the ACCT);
Insert test values ('1000000000 ', ' 0',' ');
Insert test values ('1000000001 ', ' 0',' ');
Insert test values ('1000000002 ', ' 0',' ');
Insert test values ('1000000003 ', ' 0',' ');
Insert test values ('1000000004 ', ' 0',' ');
Update test set acct = "1234", location = '1' where equip is '1000000000';.
Update test set acct = "1234", location = '1' where equip is '1000000001';.
Error on line 1
ORA-00001: unique constraint (SYSADM. TESTLOCATIONACCT_UK) violated
Kind regards.
Al
Name of the index has changed to testlocationacct
-
Can NOT see the data store after ESXi update host?
Hi all
We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage. Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system. After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing. Can not see that again.
Please help me to recover my data with the virtual machines in her store.
Thank you
Nadine
ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?
According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.
-ben
-
Can not see a virtual machine server connection mode
Hello
I'm testing VMWare View and I have a problem. I installed the ESX, vCenter and the view connection server. I have installed a virtual Windows XP machine and installed VMWare Tools + Agent and can not see this virtual machine when I want to create a "individual desktop" under "Desktop and pools. The connection to the vCenter works very well.
Any ideas?
Concerning
Are the other machines available when you try to add an invidiaul machine? I was wondering if you virtual center connectivity is working properly.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
Import photos no problem can not see the photos on iPhone
I upgraded my MacBook Pro to El Capitan. Since moving from iPhoto to Photos (even before I updated the operating system) when I plug my iPhone 5 to import pictures in the selected library I do not see the photos appear in the import window so that I can select for imports. I literally had to email it to myself, and then import it into the e-mail. I work with different libraries within pictures, so I excluded it only love the library system. Same result, can not see the photos. Also, I have unplugged and replugged in and tried the other USB port to rule out hardware, while the Photos could force them to see the device as new, and that does not work either. I tried something another user who had to open Image Capture to see if she could see all the pictures on my phone and it doesn't work, I found (theory was that opening would make Photos recognize as well). However the Image Capture wouldn't add a USB scanner so I think it's not worthy of trust. Photos only setting I have enabled is the automatic update to iCloud. Otherwise, I don't know what another parameter to seek that could block it.
When the phone is connected USB the phone reboot - many have found this will clear this problem
LN
Maybe you are looking for
-
Auto unblocking does not connect to Apple Watch
Mac OS can not the Apple Watch checked all setting and still does not... its a pain in the tip of the ideas of troubleshooting?
-
My PH Photosmart 210 has Touchscreen
My touch screen of the PH Photosmart Plus 210 to copy or scan does not. Could you help me, please!
-
Key Windows Win7 on my Satellite L500 is not readable
Hello the first excuse my bad English, please. :) I bought my L500-208 years ago with Windows7 64 bit.My activation key is more completely on the bottom, but its not really readable. I've always had the Bill includes Bill of the license key (Windows7
-
HP All in One Photosmart C7280 scan issue with Snow Leopard
Hello I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP websit
-
W510 does not detect 16 GB of RAM
Hi, I bought Thinkpad W510 a month ago and then I updated memory up to 16 GB. My laptop detects only 8 GB of RAM. I tried to change the RAM, but it detects only the RAM into the slots on the keyboard. It does not detect the RAM which is at the back.