When you save an image in PS CS 6 and go into Lightroom 5. The original and the modified image are at the end of the line upward.

Similar Questions

• Anyone know if you can use FTP, when you save, just save the selected file and not all images and cs

  Someone knows If you can use FTP, When you save , just Save the selected file and not all the images et CSS includes ...

  What?  Can you please rephrase your question in order to understand what you're asking?

  If you ask how a file on the remote site via FTP without FTPing any dependent files?  That the answer is Yes, you can do this by changing the SITE > dependent files: option in the PREFERENCES to enable the option "prompt on put/check-in."  The next time you download a file, you will be asked if you want to also download dependent files.  If you say NO and check the don't ask again option, then you will always simply load the file and not the dependents. You can change it back at any time by changing the preferences of this setting.

• When you save the files, it also gives the ability to save to Invu.

  Original title: modifying the file save options

  I use Invu to watch the old images.  I no longer use it for the new scans.  When you save the files, it gives me the option to save in the normal file type such as Word, Excel etc.  It also gives the ability to save to Invu.  How can I get rid of this option without uninstalling Invu?

  Hi EmRaggy,

  It is not possible. When you set the file, it will display all related programs to open the files installed on the computer.

• Why the colors mix into the paint after you save an image?

  After I recorded a new image in paint, some colors are distorted and mixed together. They have pants air. If something was originally a solid color, for example a pink box next to a blue zone, when I open it after that I have recorded the two colors of the boxes would be sort of a model gardiant and partially mixed between them. Is this normal? Is it possible to stop him?

  Hi wishbigmoc,

  By default in Microsoft Paint save setting is jpeg.  When you save a JPEG using paint quality is very low and it is not an option to change the quality setting.  You can change the option record under when you save your 24-bit Bitmapor PNGfiles.  Using one of these options will allow you to keep the quality of the original file, but save the file size will be much larger it would be if it was saved in jpeg format.  There isn't really anything else you can do insofar as going to save the file as a jpeg file.  you still going to lose some of the quality.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you save the file GIF grace to save for Web how can I save the original?

  Hello.

  When you save the file GIF grace to save for Web how can I save the original?

  I need the original and not optimized.  Help, please

  ilyag58620179 wrote:

  But I need to GiF animation file

  And by definition, a GIF image is optimized! A GIF is not the same size of the PSD file, and you are mistaken in thinking that you want it to be. If you are trying to achieve the slightest loss of quality, regardless of the size of the file, then you need to adjust your settings to save for Web.

• Crashes when you save the eps file

  Don't know how to solve this problem. Saw the comments on changing the time zone, but I can't seem to find where to change this setting (within AI? or are they referring to my computer settings?) Have also tried to install the new Adobe CC 2014, but even that one goes down. Also, I rebooted the computer, but it's always the same problem.

  Thanks for any help.

  Try to "Place" instead of "Import".psd files  When you place the images, you have the possibility to link the files and then again when you save as > EPS.  You have probably inadvertently incorporated the .psd files.  The right method of importing image files using the file > place command.

• Is it possible when you save the psd file to put an automatic jpg file saved at the same time?

  My job is to prepare images for print viewers and window facilities.  My clients need to approve in advance the photos before printing.

  I generally save my psd files, but because the files are very large in this format I usually save another copy in a jpg file which has a much smaller file size.  This makes it possible for me to add to a presentation and and send them to my client.

  Is possible when you save the psd file to put an automatic jpg file saved at the same time?  Or that I always have to do it manually?

  Use the Image Processor in Photoshop or install the free Dr. Brown Services.

• When you save the Photoshop elements 11 catalogue, which is saved exactly?

  When you save the catalog, which is saved exactly?

  Title of the message was edited by: Brett N

  Rolf - Jürgen wrote:

  When you save the catalog, which is saved exactly?

  Two things:

  -all your images

  -your catalog (the database and its associated files like caches)

  The catalog is physically located in its own folder; You can find its location in the menu help/information system.

• I get an "OLE" instead of a Bitmap image when you drag an image from Firefox to CorelDraw X 4, how do I prevent this?

  I get an "OLE" instead of a Bitmap image when you drag an image from Firefox to CorelDraw X 4, how do I prevent this?

  First, drag the image on the desktop, and drag it to Corel Draw. If your dragging directly from firefox to Corel Draw, only copied link.

• I use the helper downloader (ver. 2.2) when you save a video of WWII, during the reading period, I get some equidistant points from the screen and Flash

  I use the helper downloader (ver. 2.2)
  When you save a video of WWII on my Windows 7 Desktop, during the period of the video, I get points at equal distance between the screen and flashing arrow as well. What is the problem with my download?

  [email protected]

  Which may be caused by a problem with the codec that is used by this video and who is not taken care of correctly.

  You can open this video in another video player to see if it works there?

  What kind of video is it?

• When you save the labels, they save as bmp files

  When I try to save the groups tags that I am, they want to put in the form of bmp files. I just started having this problem Sunday morning March 6. When you save them before they were very good. I have never changed a setting or anything like that, so I don't know what the problem is. But it seems that I have to run a disk clean every time I save one in order for the next to be saved with the file extension, what it is, such as PNG or GIF. I hope you can help me with this situation. Very frustrating. I have Windows XP.

  Shivers58)

  Hello

  I suggest you to set the file on the file type associations and check if the problem persists. Click on the link below.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  I suggest give us the steps to recreate the issue on our systems so that we can have a better understanding of the issue.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I get an error code 0 x 80070017 data error cyclic redundancy when you save.

  Original title: Trouble when backup Vista basic

  During the backup, I get this message... Verification of data error: 0 x 80070017 cyclic redunancy. The backup fails. Any advice? Thank you...

  Hi Arctical,

  ·         When you save the backup?

  ·         Has it worked fine previously?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• error code 0 x 80070017 data error cyclic redundancy when you save

  I get error code 0 x 80070017 data error cyclic redundancy when you save. Publication solutions (error checking - automatically fix files) have not worked. Help!

  Hello

  1. When you save the backup?

  2A it worked fine earlier?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  
  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  
  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• error 0 x 8007002 when you save to an external drive

  trying to save vista windows on an external hard drive.  It maintains fail with the error code 0 x 8007002.  I tried the updates, etc., is not yet back up. Any ideas?

  Error message when you try to restore from a backup complete a Windows Vista-based computer: "the system cannot find the specified file. (0 x 80070002) »
  http://support.Microsoft.com/kb/951002/en-us

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-us Note: for senario #2 you must set Windows Explorer Tools/View tab:

  (1) show hidden files, folders or drives
  (2) remove the checkbox «Hide empty drives...» «, «Hide extentions...» "and"Hide protected operating system..." ».
  3) click on "Apply to folders", then click "OK" to exit.
  Normally the 'Contacts' and 'Research' folders are created during the installation process of Windows before setting the time zone option. The "AppData" folder is re-created when the Windows Vista to Windows 7 upgrade process.

  Also: Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  J W Stuart: http://www.pagestart.com

• When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Just as the title says:

  When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Hello

  It is normal in the Windows Photo Viewer Photo to adapt to the frame is checked.

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture