Restore the HP Slate 7 hd 3403 are

Similar Questions

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Unable to run the check disk due to having to restore the system

  When you start the system, it shows that disk needs the consistency check, but then it shows that the drive can be controlled due to the recent installation so system restore first. Although, when you try to restore the system, it is said there are disk errors that should check and may need repair in which it said restart your computer for this. When the computer is retsarted, it shows that the drive needs verification but still, says system needs to restore. So I can't run a check disk or restore the system. Help, please!

  Hi mustakimahmed,

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you are not able to start from desktop due to errors in the disk check and not able to perform the system restore too.

  Try these methods and check:

  Method 1: Run the check disk in windows recovery (winre) mode. Follow these steps:

  (a) open command prompt.

  (b) use the following procedures:

  To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed: cannot run Chkdsk because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2:

  If method 1 fails, because you are not able to perform the disk, or restoring the system check, you may need to contact the manufacturer of the hard drive to get help. As the drive that you are using may be corrupted.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• How to restore the tablespaces only 4 while cloning with RMAN?

  Hello
  How to restore the tablespaces only 4 not all areas of storage in one database to the new database of cloned all cloning with RMAN?

  I don't think it's possible to restore only 4 storage space for the database 'auxiliary '. Instead, you can use the "SKIP TABLESPACE" cloning while clause.

  You can exclude the tablespaces that you don't want the database duplicate with the SKIP TABLESPACE clause. You can exclude any tablespace except the SYSTEM tablespace or tablespaces containing rollback or undo segments.

  Refer to this http://docs.oracle.com/cd/B14117_01/server.101/b10770/rcmsynta28.htm

• I did the update of firefox Windows 10 and now, my favorites are GONE! It says: failed to process the backup file. When I try to restore the "old" library.

  Firefox did an update to 'work seamlessly with Win 10'. When Firefox is restarted, ALL MY FAVORITES HAVE DISAPPEARED. I went to the library and tried to restore the bookmarks. It won't! I have a system of computer backup, but no. CLUE where to find my favorites. So frustrated. I have used Firefox for a ton of years and never had my favorites disappear.

  Chick.Merkel said

  Firefox did an update to 'work seamlessly with Win 10'. When Firefox is restarted, ALL MY FAVORITES HAVE DISAPPEARED. I went to the library and tried to restore the bookmarks. It won't! I have a system of computer backup, but no. CLUE where to find my favorites. So frustrated. I have used Firefox for a ton of years and never had my favorites disappear.

  Well well... after Google search more, I discovered that there was a 40.0.02 update. I did and now my favorites are back.

• After that I restored the backup Thunderbird using Mozilla Backup, any of my accounts table. I checked that they are in need of backup, lift the mail.

  I backed up my 24 Thunderbird using Mozilla Backup. I did what I had to change one of my accounts. After making the changes, I decided to restore the backup I took. Restore seems to work and I checked the profile is correct and e-mail accounts are in the mail folder. However, when I run Thunderbird, only the Local folder is displayed, any of my email accounts. I really need to get this working I have very important data in the email. Thanks for your help.

  Did you change the path where the mail files?

  And, you use local folders in the GUI of TB to store messages?
  Did not have that clearly in your post.

  According to what you actually did Re: evolution of the accounts, & if the backup has been restored in the way (profile) accounts (and the profiles.ini file) think they are in. if the profile is now in a different path, you will need to change the path in the file profiles.ini to reflect the correct path.

  Also, sometimes after restore or do other work, the *.msf files in e-mail files get damaged or simply confused. The .msf files are in the same folder as the Inbox, sent, etc.. They are the index files - not electronic mail storage files. (the mail storage files do not have extensions).

  Often, when the email that actually exist in the mail files does not show in the accounts, remove only files *.msf in each acct mail storage file will correct it. This is the easiest step to try, but again - it depends on actions leading to the question.

  They will be recreated when TB restarts & apparently can "fix" themselves, to redisplay stored messages. Unless something on current storage files is corrupted.

  http://KB.mozillazine.org/Disappearing_mail

• The ' organize bookmarks page has changed and the column that lists all bookmarks has shrunk and only the folder icons are visible - their names have disappeared and is not visible. " How to restore the names?

  Records on the page "organize bookmarks" show only icons - names of bookmarks disappeared. Impossible to tell what bookkmarks they are. How to restore the names that were once next icons?

  You can place the mouse pointer on the border between the left and right panes and drag the border with the left mouse button to the right to this wider left pane.

  If this does not work or stay after you restart Firefox, then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I asked firefox to block an image on my blog, but firefox has blocked all images on the blog, there are no images in posts, pages, the theme, each image have been removed from the blog. Is it possible to restore the images.

  Hi, I was working on my wordpress blog that uses the theme "Intrepidity". I wanted to remove a header image I added to the header but could not find a way to remove, so I click right for an option. the option I took was "do you want firefox to block the image? I clicked Yes, and this is the last time I saw a picture on the blog. Firefox has deleted all the images in the blog, even the side bars are gone, the header is not more, every single photo on the post, pages disappeared. The blog is just a shell now. Is there a way I could have restored the blog images. This is the name of the blog:
  http://www.weightlosscontrolreviews.com/

  With the display site, click the site identity button (for more details about what it is to see the How do I know if my connection to a Web site is secure? article), and then click more information. This will open the page info dialog box.

  First, select the permissions tab, make sure that 'Load the Images' is set to allow (default selection should work as well)

  Then select the media tab, and then click the first item in the list. Use the down arrow key to scroll the list. If any element has the option 'Images of block of (field name)' selected, deselect the option.

  This should hopefully solve your problem, but see also the problems that cause to not show images.

  Some add-ons can also block images, for example, if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block images.

• Sometimes I lose the animation that windows are when I minimize/restore the

  When I "restoration" or "minimize" the windows on my pc, I don't get the animation, they used to do. It is as I have disabled. but I did not.

  I tried a system restore but it appeared after a few days. I checked if the programs that I have installed are causing it, but this isn't because I use the same programs for months.

  in order to obtain the return of the animation of the window minimize/restore must do a reboot of the system, or to change the windows, from the basic to aero again theme for example.

  all the solutions, because it's very annoying.

  Windows vista ultimate sp2 with latest graphics card drivers and all day.

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Well I reinstalled it and now everything is ok.

  If you need information about the configuration of my pc, tell me.

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

• If I want to return to an earlier position on a folder. He will restore the files in each of the subfolders that are associated with?

  If I want to return to an earlier position on a folder - it will restore the files in each of the subfolders that are associated with?

  Original title: restoration of files

  Hi Andy,.

  Thanks for the reply.

  I suggest you to visit the links below and check if it helps.

  Previous versions of files: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  For reference:

  Restore a previous version of a file

  http://TechNet.Microsoft.com/en-us/library/cc778220%28V=WS.10%29.aspx

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• All the members (but 1) are removed from the entity dimension in planning and deployed to essbase. -What are the data deleted in essbase so? / The data can be restored by restoring the entity dimension?

  All the members (but 1) are removed from the entity dimension in planning and deployed to essbase.

  -What are the data deleted in essbase so?

  The data can be restored by restoring the entity dimension? EPMA the entity dimension is still in tact.

  It is unclear what exectly arrived, but looks like a change was made in the dimension entity planning (not EPMA) and then deployed (successfully).

  In essbase, we see that the entity dimension has only one member left for the appropriate plan types, as in the planning.

  If you remove members and then push that yes the essbase data is deleted, if you need back then you will need to go back to your restore process.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• BACKUP QUESTION: Why is it when I backup the Lightroom Catalog (Edit |) Settings of catalog...) only the *.lrcat file included in the ZIP file... While the *., lrdata file, the preview files, ARE NOT INCLUDED?  When I restore the file *.lrcat from a backu

  BACKUP QUESTION: why is it that when I backup the Lightroom Catalog (Edit |) Settings of catalog...) only the *.lrcat file included in the ZIP file... While the *., lrdata file, the preview files, ARE NOT INCLUDED?  When I restore the *.lrcat file from a backup, WHERE ARE THE PREVIEW FILES that should be included in the ZIP to the top.  If *.lrdata (Preview file) are so important, why are not included in the zip?  [email protected]

  CraigLevine wrote:

  OK, so that's my scenario:

  • QUESTION: WHEN I USE THE [Sub-master] .lrcat, on the new computer, don't need to inculde also files .lrdata [Sub-master] on this external drive?
  • If .lrdata [Sub-master] is regenerated automatically, where he gets all the work (from the preview files) that I did, when I was working, using the .lrdata [Sub-master] when he was on the local disk.

  Thanks again for staying with me on this.  I don't know that your answer will solve my confusion. -Craig

  [email protected]

  Questions 1)

  Not because the LRDATA file is fair previews, what LR displays on your screen for a faster loading of the image and will be recreated. The previews only stored in the folder LRDATA is the basic overview created at time of importation for the display of thumbnails and previews of 1:1 for images that you have actually looked in the Loupe View or I guess that appears in the develop module.

  He get all the data to create the image themselves file extracts.

  If you have several files on your system that have pictures in them and you select one of them that you have not looked at in a while, you will notice LR creation of previews for these images, there will be 3 white dots in the upper right corner of the thumbnail. It's LR creation of previews for the thumbnail view. If you scroll quickly in the grid view, you'll notice a few thumbnails of images are gray, until you stop scrolling, then the upper left tile will come in clear view and the white dots will appear on the other images. It's LR creating previews for those of other images. Once LR created the preview of thumbnails that are on your screen, white spot will disappear. If you scroll down again, you will see more white dots

  If you switch to another folder that LR begins again create preview images in this folder. The total number of previews created and stored based on caching of the preview you have in the catalog settings dialog in the management of the files tab.

  If not, you need not the LR Previews.lrdata folder. Whenever LR is not very good this folder with a catalog he recreates it to store previews in.

  

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• I have accidentally moved my images directory in the Finder. He disappeared, but when I run iPhoto - pictures are there. How to restore the directory?

  In the Finder, I tried to copy my photos on a USB directory. I dragged rather than copy it. Now this isn't on my USB but it is not visible in the Finder. When I run iPhoto I can see the pictures, but I can't access it now as single files. How to restore the directory of pictures or find all my photo files.

  IM El Capitan 10.11.6 running.

  Thank you

  Stem

  Move it to where it belongs - in your folder. If you don't know where it is so, look for using Spotlight.

• I have Outlook Express with 2 identities, but all emails are going to the 2nd identity. How to restore the original identity?

  A month ago I received an error message trying to download emails to my primary identity.

  "An unknown error has occurred. "Account: 'mail.optusnet.com.au', server: 'mail.optusnet.com.au', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133.
  However, all emails are going into my 2nd identity.
  How can I re - define these identities?

  A month ago I received an error message trying to download emails to my primary identity.

  "An unknown error has occurred. "Account: 'mail.optusnet.com.au', server: 'mail.optusnet.com.au', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133.

  However, all emails are going into my 2nd identity.

  How can I re - define these identities?

   
   
   
  1. The error message indicates a corrupt Inbox.
  2. Messages if even received any at least in the second ID, in tools | Accounts, you also have the first account ID listed. First fix the Inbox.
   
   
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
   
  To avoid this in the future:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3