Whence the reference industry Insight?

Similar Questions

• How to get rid of the reference lines on the front panel

  I forgot how I created a couple of horizontal and vertical lines on the front panel. It seems that the original on the front lines. When I move my program to another monitor with a different resolution, the layout is messed up because of the reference lines cannot change the resolution. Everybody respected this before? How to get rid of them?

  Attached are the 2 creen shot of facades.

  Thanks in advance.

  Ah, I figured out. I accidentally selected the "scale with objects pane" from the context menu of a button in the tab. This is whence the reference lines.

  Thanks for all your guys help and advice.

• Duplicate the reference: how to unify?

  I have references in doubles, that that is the same image on the disc has more than one reference entry in Aperture.

  If I delete the reference to Aperture 2 1 and then proceed to empty the Recycle Bin to open the disk file ends up in the trash of OSX. Once you empty the trash OSX the file of the disk is lost.

  At this stage the 1 reference I did not remove is an orphan IE: the reference points to nowhere (file not existing)

  How is - that someone is supposed to do to remove 1 of the 2 reference without deleting the file from the disk?

  Thank you

  I select one of the versions in Aperture and using ' file > consolidate. " Select this option to copy the reference file when you are prompted. Then, remove the second version, a reference to this file. Now you can move the the first image is again referenced.

• Say I have use a bookmark to access a web page. Subsequently I have manually delete the reference on historical Panel - also removes the current bookmark. Never happened with vn!

  Sequence of operations leading to the problem:

  !) Existing bookmark to go to the requested web page.
  (2) later, the I delete manually the reference panel historical at this bookmark - command 'delete '.
  Search 3) via the bookmark panel list some time later, I noticed that the bookmark I would have used previously was deleted. I did not went to the Bookmarks panel and deleted explicitly point. The deletion is certainly due to him removing point of reference in the history panel.

  This behavior started recently - and I think with FF for Android exit 31 or 32. Certainly is not happened with versions before clearing the historic bar on historic Panel were introduced. I am now on version 32.0.3

  Question being entered on desktop machine so 'guessed' version info irrelevant, so I've manually entered version info, etc. below...
  

  Thank you, Rob.

  HI dislexic_wobmat,

  It seems that this problem is fixed in the next version of Firefox beta.

• Whence the fullscreen mode option is saved?

  I develop program, what are the uses WINAPI do start the IME mode by mozilla firefox. I have seen that when you press the F11 (full SCREEN MODE) it is still on mode full screen after restart mozilla. So whence the option / mode information full screen are saved?

  In the file localstore, rdf , in the profile folder.

• Pavilion m9417c - FK536AA: search for the reference numbers

  I ran into a bit of trouble trying to find the correct references for parts to repair this specific computer.

  Where can I find product diagrams that show the reference numbers? Is there another method to find the reference numbers?

  Thanks a lot for any assistance!

  Hello:

  Here is the list of HP PartSurfer replaceable components in your PC with their corresponding reference numbers.

  http://PartSurfer.HP.com/search.aspx?SearchText=FK536AA

  As you can see, most of them is no longer available at HP, so you'll have to find them on the secondary market.

• Whence the ICD file located in a CVS of Linux RT system camera?

  Whence the ICD file located in a CVS of Linux RT system camera?

  Location of the camera ICD file can be found in the following in a Linux RT (CVS) system directory

  / var/local/natinst/niimaqdx/Data

  See you soon,.

  RUCHI

  / var/local/natinst/niimaqdx/Data

• How to get the reference clock 10 MHz off PCI-5922

  Hello

  I'm evaluating PCI-5922 for the my request.

  In my application, PCI-5922 will get agilent signal 33250 function generator and the two instruments will be triggered at the same time with the same trigger signal.

  Is it possible to get out of the clock reference (10 MHz) off PCI-5922? If possible, the synchronization may be easier.

  I expect to get answers of experts!

  Zeehoon

  Hi Zeehoon,

  Before send you the unit for repair, please try one more thing.  The reference clock will be released not in fact until the task or acquisition is started or has committed at least.  Try to add a NO-SCOPE function commit after the property node where you set the reference clock output.

  Jennifer O.

• Cannot use the references in Subvi cluster (error 1055, invalid references)

  Hello

  I'm going through a lot of that through a cluster to a Subvi.

  The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.

  In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.

  What I am doing wrong?

  Attached you will find three files:

  The mainVI: Main.vi

  The Subvi: Single_Cam_RefBased.vi

  The def of the type for the cluster: RefClusterTypeDefinition.ctl

  Thanks in advance,

  Marcel

  SteveChandler wrote:

  The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.

  I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)

  COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...

  

• Close the reference (for a more specific class)

  I'm feeding a control reference to the node "to a more specific class.  When I finished, I understand that I have to close the order, but what I also close the reference that is the output of the node "to a more specific class?

  This is the same reference... There is no need to close the two.  And if you approve the automatic cleanup of references LabVIEW, you really do not need to close, as the references control must never be matched and will be automatically cleaned when your VI is inactive.

  For more information, here is a blog that just now, I wrote that talks about closing reference.

• The reference must be closed on a reading-file error or not?

  Dear users,

  When I read a file, a reference is created one should close, when no longer used, should I? Here is a minimal example to my next serious question: should I close the benchmark on reading-file error or not? Is there a created in the case of "the file does not exist"?

   

  See you soon,.

  No, when used in this way, the references created by the file read and write functions should not be closed - thought that he would have no negative effect if you did.

  In addition, you do not want or need the structure case around a reference close the function.

  Mike...

• Is the reference of the register of necessary shift in architecture of producer/consumer?

  Hi guys,.

  I was just wondering if the producer/consumer architecture is necessary register wired shift to the reference of the queue or the notifier. Is this necessary?

  I think that it isn't, because it's quite a tunnel but could anyone who thinks that the shift register is necessary, explain to me why it is necessary?

  In each of the samples I found the reference to the queue or the Notifier is connected to a shift register, I tried to wire it to a tunnel and it works well, then, what is the best implementation?

  Thank you in advance.

  Thank you guys for your quick responses...

• Open the reference vi from Labview Labview 2014 6 conversion

  Is it possible that someone can help me to convert this VI written in Labview 6.1 so that I can work in EXE in 2014 of Labview.

  I have to open this vi of 6.1 until 2014, but it does not run. The reference open vi that those do not work in program exe. Anyone know how I can replace this function...

  Thank you!

  Error 7 is file not found.  So your dynamically called VI isn't in your executable.

  In to build for your project executable specification, there is a "Source files" section.  On options for the screw is always 'include '.

• History of clear waveform using the reference

  Hello

  I would like to clean up the history of the wave I have in my hand Vi. I'm passing his reference to a sub - VI. I'm not able to find ownership of historical data among the other properties of the property node. Behold that I have:

  

  Thank you.

  -H.

  And I think that your graphic reference is wrong. Have you copied the reference of the hand? In your hand, you have connected a data type? Since it has a variety of data that can be wired, you must do this so the history is the correct data type.

  And what you're trying to do with the True constant wired for all at the end of the Terminal loop? The loop only runs once.

• Measurement of Phase difference of audio - learning how to set the reference

  I'm trying to measure the difference in phase between two audio inputs. (Left and right channel of my sound card)

  Both are free running 1 kHz audio samples that come in and out of phase.

  When the samples are in phase, everything seems to work fine and shows no phase difference.

  However once that signals start to emerge from the +-10deg phase the result keeps jumping around.

  It seems to be the fact that it is changing the reference to determine the phase.

  When I view the phase of the output of a channel is a sawtooth waveform, from 250deg and then wraps round to-110deg

  What I want, it's an entry set to 0 degrees and see the other inputs of difference of phase against it.

  Is there a way to give a signal as being the reference or another strategy?

  Thanks in advance for any help.

  PLEASE NOTE THAT THE acquire.jpg IS ACTUALLY THE VI.

  It wouldn't download like the vi. Please rename extension to acquire.vi to see.

  Finally managed to find the problem.

  Red rooster, I tried to replace your entries simulated with audio inputs card his real world and things turned out horribly.

  It doesn't seem to be a translation between the two. (Perhaps because of my understanding of Labview garbage)

  LabVIEW uses the internal reference of the DAQ cards in order to make phase measures.

  That's what all use the phase VI of measure and which lack of cards not NI - DAQ.

  That's what I thought that missed me first place but there's no way I can see simulations your own.

  To work around the problem, I used zero crossing detectors in order to compare the time ahead or lagging behind the benchmark for the calculation of phase.

  I got the core of the detector from somewhere on the forum but have lost the actual page. (my apologies to the author who deserves the credit)

  Anyway, hope this hepls someone.