bricks of router and question 5 2.4 GHz vs

Similar Questions

• Question about the replacement of router and new network location. Is this normal?

  Yesterday, I replaced my router with a another router of the exact same brand, model, and firmware version. The only thing that has changed as far as the router will have the MAC address.

  In any case, after that I swapped the router and plugged the network cable, I could use Internet all day very well. This morning when I turned on the computer, introduced me to all of a sudden with the Wizard "Set network location", and Windows has created a new situation "network 2". Everything always seem to work well.

  I want to just make sure that it is the expected, normal Windows 7 behavior after changing a router. I'm just a little paranoid because the network location Wizard pops up only the next day, I replaced the router, and not immediately after I plugged in the cable.

  Thank you!

  Yes. It's normal.  The delay in the command prompt is a little unusual, but I've seen this before.

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• Orbi router and satellites for a condominium of 40 units

  I am considering Orbi router and satellites for a condominium of 40 units.

  What are the limits on the number of satellites, and how the energy distribution (which carries the signal from the router to the satellite) on the signal, since it needs to go through a panel of circuit breaker between the router and each satellite?

  I guess all tests (so far) be on the side of the user to a single panel. In the case of joint ownership, each distribution panel is a subgroup of experts of the main breaker box.

  Hello JimLudden

  From what I gather from your question, you think Orbi is a power Extender line? Orbi does not work it on the power line, you can watch these Ko to get a better understanding of what can make the device.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/31031?CID=wmt_netgear_organic

  http://www.downloads.NETGEAR.com/files/GDC/RBK50/RBK50_QSG_EN.PDF?CID=wmt_netgear_organic

  DarrenM

• Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

  Hello

  Good evening everyone.

  I had a problem in Routing and remote access on windows 2003 server.  This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.

  three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24

  Three cards of the NETWORK adapter installed on the server as with the IP - next

  NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.

  NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)

  -3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.

  Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...

  So, how do I access the internet to another two network also?

  I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?

  Here is the result of the current track...

  D:\Documents and Settings\Administrateur > route print

  IPv4 routing table
  ===========================================================================
  List of the interface
  0x1 ........................... MS TCP Loopback interface
  0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
  niport
  0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
  iniport
  0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
  2 miniport
  ===========================================================================
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
  192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
  192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
  192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
  192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
  192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
  192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
  224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
  224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
  224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
  255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
  255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
  255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
  Default gateway: 192.42.161.112
  ===========================================================================
  Persistent routes:
  None

  Sorry if I'm not able to explain properly. Please let me know if you have to explain more about it...

  Thank you all.

  Mahesh

  Hello Manu,

  Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• The Routing and remote access could not start, error 214500037 (0x80004005)

  My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
  Event ID: 7024, with service specific error 2147500037 (0x80004005)
  I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

  Thank you

  Hi budhihartono,

  Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Router and Modem terms as device NAT Double - Solutions?

  Two questions I have about DSL/PPPoE

  (1) look in these forums, it is said that if you have a DSL modem, then you need to change your IP 192.168.2.1 could someone tell me why just for my own knowledge?

  (2) another question I have is what I use PPPoE if I have a DSL modem? Changing automatic DHCP to PPPoE willl solve my problem with my xbox not finding online games?

  (3) what I need to change my router in Bridge mode and is the same thing as mixed? If not how can I change due to bridge mode I've read that my router and modem are could act as a double NAT that could cause problems for the xbox?

  Any help would be welcome because I don't have any idea how to solve this

  Problem solved! Combination of mode Bridge and address static ip assigned to the xbox. Thank you guys

• First router users Questions

  It's my all first time owning and you use a router, so I have a few questions that I would ask.

  1. my router connects (with flashing lights) constantly, or should it be unplugged when not in use?  (By fear it overheats).

  2. If I stay connected to a wireless port of my router at all times (on any given computer), he eats my bandwidth even if I'm not surfing the internet?

  Thank you if you answer these questions a little silly. XD

  For a first time router owner questions are quite normal. You can't cut anything and the security post is a good tip. If your main concern is the bandwidth, you don' t want your neighbors it devours. Insofar as your LAN or LAN you can leave that as well without any problem of bandwidth. (Although with wireless operate in some connectivity issues) Try not to confuse LAN with WAN. LAN = network, WAN is you ISP a.k.a your bandwidth. Finally your WEP key (which is what I assume you enter whenever you sign out) you can leave in and click 'Disconnect' or you enter it each time

• Defining a router and 2 switches in a network

  Hello!

  I have a question, please reply as soon as possbile.

  Look, I'm new in routing, just lerning, CCNA Discovery course, there is the problem:

  

  well, I'll put in place a ROUTER and 2 switches, I have set up in terminal:
  the end result, we have:
  ETH 0/0 (from where internet is coming) - IP - 192.168.100.200
  ETH 0/1 (inside the network) - IP - 192.168.80.1

  Also, I configured the same way ARP:
  Slash rip router (config) #.
  slash network (config - router) # 192.168.100.0 / / IF I understand ARP allows data transffer beetween networks and make it visible on the other

  slash network (config - router) # 192.168.80.0

  now, if the two devices end network (PC), I ping the ping works and the package was sent and received.
  !!!! THE PROBLEM IS > why I can't ping (PC0) 192.168.100.201 the 192.168.80.2 (PC1)
  the INVESTIGATION period was made.

  There are in tie my tracert schema package. Thx for the reply and attention!

  you have the default gateway configured on the two PCs?

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Why my xbox getting kicked out of router and sometimes subsistence have limited connectivity

  I have an Xbox 360 that works on all other routers very well so I know very well that this is not my wireless card. When sharing the internet threw a computer to the same router there is no problem. the computer uses a wireless card. so I do not understand why the computer share internet with a xbox there is no problem with the router but the Xbox connection it itself using a wireless card (and the Xbox is still closer to the router to the computer) has horrible problems such as disconnection without reason. and sometimes the connection and all I can do is communicate with fried but nothing else. and this is a new router because the other was replaced because he was falling packages. This new router is now a RT-AC66R. It's actually pretty cool, I can walk like three blocks away and still have the wifi on my phone. My xbox is about ten feet away from him and the computer is about fifteen feet away. and now my new problem is that I can run is no longer an Ethernet cable to the computer to share internet. because the computer sees the xbox but xbox does not see the pc. or rather the xbox has failed the test of pc. and also, I can share is no longer my internet with another pc. I changed the map from one pc to the other wireless and connect the pc with the wireless card without problem. and this is supposed to have an incorrect ip address. and if you return it the problem are the same now that with the wireless card works, but cannot share internet with each other. and before there was no problem of internet sharing. but I could see the other pc also not one way or another. I solved this problem and now the PC can not only see each other they can copy cut and delete files on the other pc and the media. but it's when I can share is more of the internet with the xbox. and now the xbox can not see ether pc. and I thought that was the problem, so I disabled the sharing and then it still doesn't work. I have even made the system restore and that did nothing. I have been reading forums for two days now and no help no one has the same problem as me. a pc is Windows 7 Professional and the other is running Vista Edition family Basic. Please someone anyone help me im going nuts. I'm about to get a switch, so I don't have to keep switching the ethernet cord so I can have only two things in line at a time. I have also in the future will get a long enough cord to plug the switch directly to the router. but don't have the money to do it right now. I live in a motel and already got in trouble for my landlord to reset the old default router so I could do better for my system. then I told her that it was dropping packets. then he replaced. and set up a cage to stop me reset it. but all I have to do is with my finger tilt it upward and I access to the reset button. I have to pay for the internet service and am really frustrated because I tell him something is wrong, but he thinks that his fine because he bought a new router. But if my xbox is still having the same problem do you think it might be the cable from router to the modem Ethernet. but the new router does not drop to all packages and it works beautifully when he wants to. Sometimes it stops just to put a signal and it will stay like that for hours. even unplug for 30 seconds and in him plugging back in does nothing. or do you think it is because it has only a limited number of ip addresses available and put them to save to say ten days instead of one. because by resetting my wireless card and other peoples computers also reset the wireless card when they have problems connecting or it ask for a new ip address. that such use then upwards of all spaces allocated for the connection? I don't know it's just a theory of reading the forums if it's wrong to death someone please let me know. also, I asked another question about the before samething but DK if I explained myself well in the issue of ether, because I'm so tired that I have a bad typeing it drives me crazy I want to just reset the router by default so that I can access it Web page. so, if you can help me that would be awsome is the other post.

  I have a network administrator who do not want to enjoy internet that we pay to help please

  I have trouble getting my computer to share its internet connection with another computer and an xbox. I had their work and now the xxbox. I had their work and now the xbox can even see the computer and the other computer which is running vista and continues to indicate the ip address is incorrect. I live in a hotel and already had introuble for reset the router to the default password, so I can fix the parameters. but now he baught a new router and put a cage around him so he can not be reset to zero and the computer sharing wireless internet runs 7. and the xbox can sometimes connect to the router but keeps having started from, or sometimes it says that some live content xbox is not available. I know this isn't the xbox wireless card because it works on all other routers very well. and as I shared a connection with the computer vista very well before now, it won't work at all. can someone help me please?

  Hi the dArKsTaR,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to connect connectivity Xbox Wireless.

  Try these steps and check if the problem persists.

  Step 1:

  You can try the steps described in the links below and check if they help to resolve the issue.

  Xbox 360 Wireless Controller: Controller disconnects or is unable to connect to your console

  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/Xbox-360-top-issues/wireless-controller-disconnects-frequently-or-cannot-connect.aspx

  Xbox 360 Setup

  http://support.Xbox.com/en-us/pages/Xbox-360/get-started/console/default.aspx

  Step 2:

  If the steps in the link above does not help then you can post the question on the link for assistance on the number below.

  With the help of my console

  http://forums.Xbox.com/xbox_forums/xbox_support/f/7.aspx

  Alternatively, you can contact the technical support team of Microsoft XBOX that the issue may be with the material.

  http://support.Xbox.com/en-us/pages/contact-us.aspx

  http://support.Xbox.com/en-us/?XR=shellnav

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Bridge mode... Router and TC

  My internet does not work if I have my xfinity on bridge mode router and my TC on mode bridge?

  Bridge on the modem/router and Bridge Mode on the TC will not work.

  Xfinity modem/router must be configured as a modem only simple only (in bridged Mode), and the TC must be configured in router Mode of DHCP and NAT

  or

  Xfinity modem/router must be configured normally as a modem/router, and the TC must be configured in Bridge Mode

• Why apple card app does not show the routes and directions between two places in India in an iphone 6 s more?

  map does not show the routes and directions

  This feature is not yet supported in India.

  http://www.Apple.com/in/iOS/feature-availability/#maps-directions

  In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.

  Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.

  http://www.Apple.com/batteries/maximizing-performance/#iOS