Where the last disk clone cold converter?

I can't believe how well hidden it is. Can someone buy me a clue on where is this iso?

You will find the most recent version in the modules and VMware vCenter Server 4.0 Update 3

André

Tags: VMware

Similar Questions

I know where the last call from my iphone stolen?

I know where the last call from my iphone stolen?

Not anyone here, not Apple. You can check with your operator if they used your SIM card, and you may have to get the police involved for the information about the location. If it was not your SIM card, you would not be able to.

I exported the photos in a folder that is named in the order. Now I want to export more photos in the same folder, but take the sequential numbers where the last export was stopped. Finally was Apr_409, in following should be Apr_410. Not Apr_1 (1). Any a

I exported the photos in a folder with the photos sequentially named. Now I want to export more photos in the same folder, but take the sequential numbers where the last export was stopped. So if the last photo was named Apr_409, I want the following to be Apr_410. Not Apr_1 (1). Any advice? Thank you!

Hat is not a feature of Photos.

If you want to make sure your new export is sorted after previous export, change the field "sequential prefix" in the Panel of the export to a string, which will be sorted after the original prefix you have chosen.

Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

(With the help of Win 7 32 - bit update)

I have not used a disk of 3.5 inches for many years. In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

Also, AutoPlay was disabled on my system for years.

That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

How can I be to determine:
1. What causes the error message and/or
2. How to stop it forever!
Thanks for any thoughts or ideas!

DennisCPA

Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

See you soon

Glenn

Select from the table where the last character of the string is numeric
Hello
I have a table of STREETS with a field called ADDRESS. I want to select all the records in streets where the last character in the address is a number.
Select ADDRESS of STREETS where regexp_like (substr (address,?,?,), '[0-9]');
--? means that I don't know what to put here!

I don't know if substr is the best approach to do this, because I want only the last character and the records are of different lengths.

Thank you!
Hello

If you want to use regular expressions:
```
WHERE     REGEXP_LIKE ( address
              , '[0-9]$'
              )
```
You can get the same results, no doubt more effectively, without regular expressions:
```
WHERE     INSTR ( '0123456789'
           , SUBSTR (address, -1)
           )     > 0
```

Implement the bootable disk clone

I have a basic model last iMac 21.5 "2013. It was slow so I bought a 120 GB external SSD that I use as the startup disk and now, it's great. I would now like to divide the internal drive to be a clone of 120 GB SSD (just in case) and 880 GB external for documents, etc.

What is the best way to create the clone of the SSD so that he clones per week and is bootable? I'm not comfortable using Terminal Server.

Any help would be much appreciated. I already have Carbon Copy Cloner and a billing to buy other software such as Super Duper.

Thank you.

CCC will work for external cloning internally. However the destination for the CCC drive really needs to be large and small not as the source drive.

Personally, I have a dual boot system and use CCC to back up both of my drives start at several different external drives larger.

FWIW personally I try to erase the internees, clone back to it from the outside, then try again starting and running from the inside.

who is the last disk in per_all_people_f and per_all_assignments_f
Hi friends,

I'm relatively new to HRMS. I am trying to connect to per_assignment_f and per_people_f to get the last record employee...
But I end up in multiple records are displayed...

can you provide sample sql exactly last record for account held the employee...

Thank you
ASP.
Hello

the conditon should be:

trunc (sysdate) between rt.effective_start_date and rt.effective_end_date
and trunc (sysdate) between pt.effective_start_date and pt.effective_end_date

Try this: -.

Select pt.person_id,
PT. Employee_number,
PT.title,
PT.full_name,
PT.first_name,
PT.middle_names,
PT.last_name,
nickname of PT.known_as,
PT.date_of_birth,
PT.marital_status,
PT. Nationality,
PT.national_identifier,
PT.email_address,
PT.work_telephone,
PT.effective_start_date,
PT.effective_end_date,
RT.assignment_id,
RT.grade_id,
RT.position_id,
RT.job_id,
RT.employment_category,
RT.manager_flag,
RT.payroll_id,
RT.location_id,
RT.primary_flag
of per_all_people_f pt.
per_all_assignments_f rt
where
PT.current_employee_flag = 'Y '.
and rt.primary_flag = 'Y '.
and pt.person_id = rt.person_id
- and pt.person_id = 111110
and trunc (sysdate) between rt.effective_start_date and rt.effective_end_date
and trunc (sysdate) between pt.effective_start_date and pt.effective_end_date

Hope this fixes your problem

See you soon

Select the last disk in the history table
How to select the last record in a history table? the example data is
< p >
Product EffectiveDate

prod1 01/01/1980

prod1 01/01/1990

prod1 01/01/2000

prod2 02/02/1980

prod2 02/02/2000
< /p >
< p >

The expected result is

Product EffectiveDate

prod1 01/01/2000

prod2 02/02/2000
< /p >

Assuming that there is a single line with max (effectivedate) for a given product
```
SELECT product, attrib1, attrib2, ... , max_effective_date
  FROM (SELECT product,
               attrib1,
               attrib2,
               ... ,
               effectivedate,
               max( effectivedate ) over (partition by product) max_effective_date
          FROM history_table)
 WHERE effectivedate = max_effectivedate
```
should work.

Justin

Published by: Justin cave on October 30, 2008 18:32

Formatting changes

ask the last disk in per_assignments_v

Hello
I would like to ask how to query the per_assignments_v table to return only the last record.
When pointed out that it will create another record whenever you update from the form.
Thank you
Rey

Hey Rey,

The feature you're looking for is called follow-up Date.

Check-

https://blogs.Oracle.com/manojmadhusoodanan/entry/date_tracking_in_oracle_hrms

Basically all _F tables store data for a period of time, so you always get data from a timestamp.

SQL, you include sysdate between effective_start_date and effective_end_date for all the joins of tables _F.

Hope that helps,

See you soon,.

Vignesh

interpolation again to continue where the last tween left?
I have a clip with a tween on its X position on mouse over. This point will go up in the air on mouse... then fall and bounce on mouse over. For example, this could be a ball. My problem is that if if I mouse over this ball to lift into the air and then the mouse on... He'll do the interpolation any rebound but if I smile back on this front ball of the mouse on the Tween is complete interpolation will access the end and does not work properly. I have my sure there must be a post any on this already, but I was unable to locate a (sorry)... What I need to happen is for the mouse on interpolation from there where the mouse on tween left to. If the ball is wriggling on it will start to fall and then if back quiver on it immediately back into the air from where the mouse on tween left of... does that make sense? its really hard for me to explain this. Maybe an example is necessary. ( http://videos.sonicelectronix.com/cbennett/ball/ball.html )
I think on the mouse on the balls that must depend on the mouse Y and mouse out in the X position, the ball must fall. There are probably a few things that I do wrong here but if someone could point me to please you in the right direction would be great! Thank you
```
import fl.transitions.Tween;
import fl.transitions.easing.*;

var bounceTween:Tween;

this.addEventListener(MouseEvent.MOUSE_OVER, ballOver, false,0,true);
function ballOver(e:MouseEvent):void{
     bounceTween = new Tween( e.target, "y", None.easeNone,148,50,5);
}

this.addEventListener(MouseEvent.MOUSE_OUT, ballOut, false,0,true);
function ballOut(e:MouseEvent):void{
     bounceTween = new Tween( e.target, "y", Bounce.easeOut,50,148,20);
}
```
Make one Tween to pick up where another left you normally specify just the starting point than the current value of the object: e.target.y rather than a fixed value. I don't know if you can send the object like a movieclip in this case.

Cannot change the size of the virtual disk in a converted VM

Hi, I have converted many physical machines into virtual machines using the VM converter. All off them were converted using the minimum for their HDs size so that the conversion process minutes last as little as possible. Because now there are in all readers of 'C' for all virtual machines only 1 GB of free space I want to resize their virtual disks. The problem is that I can resize them to a larger size, but Windows does not allow me to expand the volume inside Windows. When I want to expand the size of the Windows volume shows me a message saying "the selected volume is a system disk or a boot disk, or it was created in an earlier version of Windows, a basic disk. It cannot be extended.
I am attaching two files. The first is the configuration of the VM. The second is the error that appears inside of Windows. The message is in Spanish cause that Windows is in that languaje, but I have translated from English in the previous paragraph.
Is anyone of you know why this kind of errors appear? Does perform a work around? It seems that the problem is because the converted Convert the HD as a base virtual HD. In this format (Basic) Windows does not allow to expand. You have to change its format in Dynamics to develop, but when you try this error appeard.
The first work-around, I thought to do is to make a picture of this disc with Ghost and try to paste this image into a new hard drive for the virtual machine, but I don't know if it will work.
Thank you.
Warlock.

I have had success in utility Dell ExtPart help to resize on the fly without interruption of service to initialize volumes (drives C :). Other methods such as attaching the drive as a data volume to another server or using GParted require at least downtime of this virtual machine and often down more than one time. With ExtPart, I was able to avoid it completely.

Check out this blog for more information post:

http://blogs.kraftkennedy.com/index.php/2009/06/30/expand-virtual-machine-boot-volumes-with-no-downtime/

Where the last installation program LV2010 Run-Time Engine?

Sorry for this absurd question, but after a half hour of roaming the site I can't find an installer LV2010 RTE.

Would it not be this difficult?

Could someone tell me please in the right direction?

Thanks in advance!

http://lmgtfy.com/?q=+LV2010+RTE+Installer

Sorry, but I love this site sometimes. I found the search function OR be so difficult.

Or click on Support Services & > NOR drivers > software > LabVIEW Run - time Engine

Where the last stable 64 bit Linux firefox (I don't want 32-bit)

Some windows don't related answers please

Hello Hal9King,

http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/latest/Linux-x86_64/

Thank you

VMware converter restarts the physical server after cold clone

Hey
This can already city, but I can't find any discussion about it. I do a few P2Vs using the bootable disk to Vmware converter 4.1.0 cold clone. We have not all KVM/IP switches, I visit the server room to check the status of the conversion. The problem I have is that once the converter is completed, it randomly restarts the physical server, I converted (does not seem to happen to any of them). Of course, I don't want the physical server switch on again as changes could be made to it. I don't see any option in the converter to tell him not to restart or even stop that would be ok?
Has anyone encountered this problem and maybe a solution?
See you soon

This is a very dirty hack that will do what you want

Edit the coldclone.iso and delete the file... \I386\bootfix.bin.

If you delete this file from the CD will not be asked to "press any key to boot from the CD" - instead, it will always start in the CD.

So this also means you must change the boot sequence for the physical machine BIOS to boot from the CD-ROM.

Then - even if the CD Coldclone restarts for unknown reasons - it will never restart under the original system, but raise the CD.

___________________________________

VMX-settings- VMware-liveCD - VM-infirmary

Get the last disc based on the date
Version of database

Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE Production 9.2.0.8.0
AMT for HP - UX: 9.2.0.8.0 - Production Version
NLSRTL Version 9.2.0.8.0 - Production

data and model table

CREATE TABLE EXAMPLE
(
UNIT_ID1 VARCHAR2 (15 BYTE) NOT NULL,
COLL_DATE1 DAY,
ATTRIB_CODE1 VARCHAR2 (4 BYTE) NOT NULL,
UNIT_ID2 VARCHAR2 (15 BYTE),
COLL_DATE2 DAY,
ATTRIB_CODE2 VARCHAR2 (4 BYTE),
DATE OF AUDIT_INSERT_DATS NOT NULL
)

Insert into SAMPLE
(UNIT_ID1, COLL_DATE1, ATTRIB_CODE1, UNIT_ID2, COLL_DATE2,
ATTRIB_CODE2, AUDIT_INSERT_DATS)
Values
('W039712008646', TO_DATE (OCTOBER 8, 2012 00:00:00 ',' DD/MM/YYYY HH24:MI:SS'), 'DP', 'W039712008646', TO_DATE (OCTOBER 8, 2012 00:00:00 ',' DD/MM/YYYY HH24:MI:SS'),)
'PP', TO_DATE (OCTOBER 9, 2012 11:10:56 "," MM/DD/YYYY HH24:MI:SS'));)
Insert into SAMPLE
(UNIT_ID1, COLL_DATE1, ATTRIB_CODE1, UNIT_ID2, COLL_DATE2,
ATTRIB_CODE2, AUDIT_INSERT_DATS)
Values
('W039712008646', TO_DATE (OCTOBER 8, 2012 00:00:00 "," MM/DD/YYYY HH24:MI:SS'), 'DP', NULL, NULL,)
'DP', TO_DATE (OCTOBER 9, 2012 11:11:02 "," MM/DD/YYYY HH24:MI:SS'));)
Insert into SAMPLE
(UNIT_ID1, COLL_DATE1, ATTRIB_CODE1, UNIT_ID2, COLL_DATE2,
ATTRIB_CODE2, AUDIT_INSERT_DATS)
Values
('W039712008647', TO_DATE (OCTOBER 8, 2012 00:00:00 "," MM/DD/YYYY HH24:MI:SS'), 'DP', NULL, NULL,)
'DP', TO_DATE (OCTOBER 9, 2012 11:15:18 ',' DD/MM/YYYY HH24:MI:SS'));)
Insert into SAMPLE
(UNIT_ID1, COLL_DATE1, ATTRIB_CODE1, UNIT_ID2, COLL_DATE2,
ATTRIB_CODE2, AUDIT_INSERT_DATS)
Values
('W039712008649', TO_DATE (OCTOBER 8, 2012 00:00:00 "," MM/DD/YYYY HH24:MI:SS'), 'TP', NULL, NULL,)
'TP', TO_DATE (OCTOBER 9, 2012 11:15:39 ',' DD/MM/YYYY HH24:MI:SS'));)
Insert into SAMPLE
(UNIT_ID1, COLL_DATE1, ATTRIB_CODE1, UNIT_ID2, COLL_DATE2,
ATTRIB_CODE2, AUDIT_INSERT_DATS)
Values
('W039712008650', TO_DATE (OCTOBER 8, 2012 00:00:00 "," MM/DD/YYYY HH24:MI:SS'), 'RD', NULL, NULL,)
'RD', TO_DATE (OCTOBER 9, 2012 11:16:10 ',' DD/MM/YYYY HH24:MI:SS'));)
Insert into SAMPLE
(UNIT_ID1, COLL_DATE1, ATTRIB_CODE1, UNIT_ID2, COLL_DATE2,
ATTRIB_CODE2, AUDIT_INSERT_DATS)
Values
('W039712008653', TO_DATE (OCTOBER 8, 2012 00:00:00 ',' DD/MM/YYYY HH24:MI:SS'), 'CX', NULL, NULL,)
'CX', TO_DATE (OCTOBER 9, 2012 11:17:23 ',' DD/MM/YYYY HH24:MI:SS'));)
COMMIT;

-----------------------

unit_id W039712008646 has two records. I need a query to get the last disk based on audit_insert_dats. Any help is appreciated.
I tried to use max (audit_insert_dats) but not able to get a record
user_anumoses wrote:
unit_id W039712008646 has two records. I need a query to get the last disk based on audit_insert_dats.

You can use the ROW_NUMBER() analytic function
```
SQL> select *
  2  from
  3   (select a.*,
  4     row_number() over(partition by UNIT_ID1 order by AUDIT_INSERT_DATS desc) rn
  5    from sample a)
  6  where rn = 1;

UNIT_ID1        COLL_DATE ATTR UNIT_ID2        COLL_DATE ATTR AUDIT_INS         RN
--------------- --------- ---- --------------- --------- ---- --------- ----------
W039712008646   08-OCT-12 DP                             DP   09-OCT-12          1
W039712008647   08-OCT-12 DP                             DP   09-OCT-12          1
W039712008649   08-OCT-12 TP                             TP   09-OCT-12          1
W039712008650   08-OCT-12 RD                             RD   09-OCT-12          1
W039712008653   08-OCT-12 CX                             CX   09-OCT-12          1
```

Where the last disk clone cold converter?

Similar Questions

Maybe you are looking for