Where the PhoneGap model?

Similar Questions

• WHERE can I FIND the EXACT MODEL NUMBER for MY Notepad hp2000?

  I have searached through all of the documentation I received with my laptop HP 2000 with windows 8.  I can't find the identification number complete necessary to see if it's a blue tooth enabled.  Where can I find this number?

  Hello:

  Please consult this guide to find the full model # of your laptop.

  http://support.HP.com/us-en/document/c00033108

• where to place the server models

  Hello!

  I created a site that is supposed to be secure. This is why my site server requires that all the files (except index.html) must be placed in the folder named "net_static" (js, css, images etc.) or 'net_data' (html pages). When I place the models folder in the folder "net_static", they do not work because models should always be in the root folder (so I hear). This problem can be corrected somehow? The models are needed after the publication? Thank you!

  You mean the DW models?  Why do you need to download them all?  If you use DW templates, the files should not model to be uploaded to the server to work.  Is that just a DW file uses to help facilitate the creation of the new page for you.  If this is not what you're talking about you will need to go into a little more detail on your model.

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• Difference between the D30 models: 4223, 4228, 4229

  Sorry for the newbie question, but what is the main difference between these models?

  4223

  4228

  4229

  Seems that most of the people have the 4223.

  They are all the same in terms of hardware. The difference is the way in which they are built, the components they are configured with and warranty rights.

  4223 systems many TopSeller and CTO (configured to control) systems with 3 year standard on-site warranties. TopSellers are systems preconfigured with the most popular groups of component, then make in bulk in order to lower the price. They are usually sold through major retailers. CTO systems are available only on lenovo.com and are made how you want.

  4228/4229 systems are generally pre-configured models containing less popular configs or those who tend to be more expensive. Guarantee is still generally 3 yr + OS here in the United States since it is the standard for the machines. If it's a ThinkPad so security could be drop foregoing and on-site for other models. You'll also see systems controlled through special deals with the types of machines 4228/4229. As CTO, but built in a configuration standard or ordered with a special config and in bulk for an organization.

  A later update of the platform presented on the MTMs 4353/4354 where the support boards and component system changed. 4354 s were generally TopSeller/CTO and 4353 s Pre-preconfigured/SB/Refurb/etc.

  I don't know that a much longer answer could be considered here. However, the details get pretty boring.

  (Esays: fixed typo's fault)

• Property to tell whether the process model has been run?

  Hello

  Is there a property to look at a sequence context, where I can tell whether or not the process model has been run?  I need to edit programmatically initialization step vi, depending on whether the process model has been run.

  Thanks for any idea,

  David Jenkinson

  RunState.Root! = RunState.Main

  or

  PropertyExists ("RunState.ProcessModelClient")

• Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

  Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

  Hello

  Can't find the official specs of HP. But since the following specifications

  |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

  There

  Ports:

  • 2 x USB 3.0
  • 2 x USB 2.0
  • 1 x HDMI
  • 1 x VGA
  • 1 x jack Headphone-out/microphone-in the drop-down list
  • Multi format card reader

  Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

  Kind regards.

• How to run the callback model SequenceFilePostStepFailure after step fails with the calls of the nested sequence

  Hello

  I want to appear a message immediately box on any test failure.  I thought I could use the reminder of the SequenceFilePostStepFailure model to achieve this, but when I change the reminder of process model to achieve this, I found that the recall code is executed only for the failures of step of the top level of the page sequence file.

  My test code has sequence called before mutiple files to the granularity of the basic numerical limit test that range from success or failure, so I would like to run the callback SequenceFilePostStepFailure immediately at this level.  I can accomplish this by adding a substitution of recall of SequenceFilePostStepFailure in the file of the sequence in question, but I prefer to use the implementation of reminder default template, so I can't find all the places where numerical limits tests are executed and cause the ASE of pass/fail.

  I have attached a few sequences of the example I want to illustrate the problem.

  Thanks for the help,

  Daniel

  My fault, I see now that the recall of model should I have changed is the ProcessModelPostStepFailure.  Problem solved.

• The parallel model configuration help

  This is my first time posting, but I'm a long time reader...

  First of all, I consider my knowledge novice Teststand high to low intermidiate level. I created a sequence test to aid in Teststand that call labview vi. My test sequence tests 5 units at a time in a parallel model (model in parallel sequence). From a functional point of view, everything works great for single pass and loops. However, here's my problem:

  When you select "USE Test", it brings up a window that asks you the serial number for each of the five stations. The operator must then enter a serial number for each and press OK proceed. This configuration is not valid for what I do. My test setup has a button for each of the 5 stations. The user must press the button to start the test (connects to a data acquisition). Then the serial number is read from the UUT and entered in the report.

  How could I go how to reconfigure it? I'm not looking for someone solve my problems for me, I just need a little direction. I looked at the parallel sequence model and I may not know where to go with it.

  Help, please

  Ryan

  TestStand 4.2

  LabVIEW 2009

  In the parallel model, you will see the Pre DUT reminder.  Inside of there, you will find the steps that call the dialog box you're talking about.  The best option is to replace it in your file of the client's sequence.  Then write your own code that dictate the required operators to go direction.

  It's just the description the General "point you in the right direction."  Please let me know if you want more details.

  Kind regards

• Equivalent of PreUUTLoop for the parallel model

  I am building a test sequence to test two DUT in parallel, on a station where some of the facilities will be shared.  I want to initialize all the equipment BEFORE the start of the exectuion of tests and even more specifically before the individual PreUUT of each execution taken step.

  It was logical to my approach "Initialize hardware" in the "PreUUTLoop" sequence reminder in an original design that used the sequential model. It must only be done once.

  Is there a reminder of similar sequence in the parallel model in which I can move step 'initialize hardware "?

  I put in the SequenceFileLoad callback.

• With the help of control and simulation module; e to get the time the MISO model Manager

  Hello

  Please can someone show me how to find the response time of the system below using the module control and simulation?

  (y (k) - 1,7407 y (k-1) + 0.6236y (k-2) + 0.1782y (k-3)) =-0.0932 u(k-1) + e (k)

  where there is out, u came and e is a white noise.

  I tried to enter the CD construct MIMO model, then connect it to CD response time. * s vi.

  But what I really need to enter the model coeffs every time? and I still don't see the answer!

  Help, please...

  Kind regards

  ruser

  Hello

  you have the correct image... I used the Toolbox ID sys (Assistant)... to estimate the system model...

  and I tried all week last get the model of my system in labview for use the control on this module.

  Alhamdulillah...

  I ended up doing... I saved the template to a file from the Toolbox id sys... (my model is in discrete form) then I loaded it in labview using load file pattern...

  so now I in labview...

  now for control parts... ..

  Thank you again...

  ruser.

• Help! I can't find the number/model number series/number for my printer!

  To fix a printer problem, it is often very important to know exactly which printer you are using and usually just 'Photosmart', 'Envy', or 'Laserjet' is not enough to narrow the possible diagnosis. Same different generations of the same model can use different hardware or software. While HP put this info in several places to find this info can sometimes be difficult or close to impossible if you don't know where to look, or what you are looking for. Watch this video to locate all of the above.

  If you need help to try one of these links on your specific printer family:

  Deskjets

  http://support.HP.com/us-en/document/c01105883

  Want to series

  http://support.HP.com/us-en/document/c01105892

  LaserJet

  http://support.HP.com/us-en/document/c01230412

  Officejets

  http://support.HP.com/us-en/document/buu04090

  Photosmarts

  http://support.HP.com/us-en/document/c01105892

  PSC

  http://support.HP.com/us-en/document/buu04090

  If you have any questions or concerns do not hesitate to ask!

  Good luck!

• XML with a member does not properly in the data model

  I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

  QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
  

  I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

  This problem is closely related to this question, where a solution QML is given.

  Hi Mitch99,

  Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

• The relational model engineer

  Hello

  When you perform an engineer to the model of relationship I get an exclamation point for some entities where the difference lies in the translation of names and table name, I guess. See attached screenshot. I assume that this is because the bug in the translation of several terms of the plural name (singular) is not yet fixed in Oracle Data Modeler Version 4.1.2:895. This is a correct assumption, or is there something else involved in this.

  

  Robert

  Hi Robert,.

  We have multi word term (any) and you need to define a separator for such construction and dash is a default separator. It must therefore school-unit and plural school-units.

  Of course, you can use a space as a separator, but who could bring confusion because it is a default separator for the names of Word multi in the logic model.

  If it works for me if the separator for multi terms (or multi term words) is correctly defined in the glossary.

  Maybe it will be much simpler to have:

  School, schools

  Unit, units

  then the school unit will be transformed into school_units - plural is taken only for the last word - unit in this case

  Philippe

• Entity displayed in the browser, but not displayed in the logic model

  Hello

  In a drawing, I got myself in a situation where two entities are identified in the logic model of the browser, but are not as on the logical schema. I have created the entities, but removed later. However, when I engineer the logic of the relational model, two tables based on the entities are created. I do something wrong, or is this a bug, entities having not correctly deleted for some reason any?

  Kind regards.

  John.

  Hi John,.

  There is a problem in version 4.1.1 of maker of data if some entities or other objects are deleted from a template that has already been registered.  On the next saved position, the saved definition only is not updated correctly, and deleted items reappear on the loading of this registered version.

  This will be addressed in the next version.

  In the meantime, the workaround is to use save them as rather Save to save your template.

  David