Portege M780 - supervisor password asked after sleep

Similar Questions

• BIOS password ask after you put the recovery CD

  Hi all

  I have a problem,

  I put inside my Satellite A210-17z recovery CD and I reboot the system.

  The system to boot to the CD and ask me the recovery, I said yes, an MS-DOS window opens. It seems that the recovery was in progress and completed.
  After my phone restarts itself and a BIOS password asked me, but I never put a BIOS password.

  You have an idea or know this password?

  Thanks a lot for your help.

  Julien

  Hello Julian

  BIOS password can be set only and the recovery procedure has nothing to do with the BIOS, BIOS password or the BIOS settings.
  Recovery CD has the task to wipe the HARD drive and install recovery image.

  I did the installation of recovery many times on different laptops (not only the portable Toshiba) and I never noticed anything like that. So the question is, does anyone else have the BIOS password value and you don't know about it?

  BIOS password can be removed by the Toshiba service provider.

• Where to insert the BIOS on Portege Z830 supervisor password?

  + Number description: +.
  I can access BIOS through F2 on my Z830.
  The installation of the system is listed, but cannot be changed.
  The BIOS supervisor password is set, and I know.
  There is no prompt like ' insert password: "."
  * Please help me find the way how to insert it.*

  (I can also run the system configuration utility.

  There is a prompt "Insert password."
  * If I insert my password it works.*
  But in the utility are some parameters (for example Intel Rapid Start) is missing.)

  BIOS version: 1.8
  8.1 Windows 64-bit

  Post edited by: micko

  Hello

  The password of the BIOS and the supervisor password can be removed in the area of security of BIOS.

  Please also check this Toshiba document.
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.
  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Qosmio G20: password asked after formatting my HARD drive

  Hello
  I have a qosmio G20, after having a virus on my computer, I decided to take my HDD in and formatted within an external box, but when I tried to install Win XP on it after reinstalling the HARD disk the computer asks me a password.
  can someone help me please...

  All the action you described confused me. Please let HDD inside your laptop and delivered using recovery DVD for the installation of the OS and everything will be OK.

• Why iMac has suddenly started asking to sleep after password?

  Hello

  I have my standard account set to auto connect. But for some reason any iMac has recently begun asking password after walking computer from sleep mode. Why is this?

  Go to: Apple > System Preferences > Security & privacy > general, open the preferences panel

  and uncheck "Require password _ after sleep or screen saver starts"

  

• Password after sleep

  Hello.

  I have Windows 8 Pro. My Lenovo desktop PC will not make me a password after sleep, even though I did everything in Power Options (for example require a password on wake up, etc.). When the computer wakes up in the morning, it asks for a password. But when he wakes up from his sleep after 25 minutes (balanced power options), it does not ask for password. I really need the pc to request password. Help, please. Thank you

  Can access the settings / settings of computer in the bar of charms

  Then the issue of users.    Make sure it says any user that wakes the computer must have a password.

  Maybe take in front of what it is now and restart.   Then change it again if necessary.

  Are you course in 25 minutes you mentioned really sleep mode - sounds like he turned off the screen and not yet reached the hour of sleep to occur.    On my Lenovo power light flashes when his sleep and full-time light up when the screen is blank.

• After capturing the BIOS with srsetupwin64.exe a supervisor password is set

  After I capture the bios with srsetupwin64.exe settings, so a supervisor password to restart the computer. I have only to capture settings in the bios with the command "srsetupwin64.exe/c /kpap d:\" The command was not successful (no file exists), I get the message:

  ERR - passwords do not match

  Err (8) - secure information could not be written

  Model: T540p (20BFS05l00)

  SRSetup version: 2.11

  BIOS version: 2.19

  It's not understanding why now a supervisor password. Now, the device is not usable. Please help, respectively according to me a replacement is necessary, but I think it's a bug.

  Concerning

  OK, the books have been ordered from a pool. And lenovo has set a password for the supervisor for the books of the pool. Now, information has arrived to the technician :-)

  Sorry for the false alarm.

  Concerning

• Utility supervisor password does not work after update Vista

  I updated my computer that I brought in October 2006 PSP AOE P100 227 to Vista.
  I noticed that the supervisor password utility does not work. I downloaded the new software for this toshiba that was released yesterday but the wissard installation continues to indicate the serial number invalied...

  How to make this work?

  Hello

  Did you choose the good laptop of form pilot?
  Your laptop is Satellite P100-227 and serial number must begin with PSPA0E-xxxxx
  Is why we choose the password since the P100 utility area (PSPA0E).
  It seems now that the 1.39.50.7C version is the most recent.

  Please post back if it works or not.

• Passwords have been forgotten, and there is no supervisor user. When changes must be made, it is always ask the supervisor password, but there is no room to even try to type a...

  I tried to get an answer to this problem of Acer, but they were completely useless.  This hard drive is almost to the maximum, programs should be removed... once again, without this supervisor password, it appears that nothing can be done.  This computer is a little older than a year.

  Sorry, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".

  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Portege Z830 - Bios password change/remove

  When I started my new Portege Z830, it gave me the opportunity during the entire upward, to put a bios password.

  I did, but I am now regret, as I have to present two passwords, bios and windows, can start to do something. As I need the BIOS one, how in the system to edit or delete, now that I don't have access to all of the screens?

  Thank you

  You can delete it in the BIOS options directly or using Toshiba tool in Windows supervisor password utility.

  I recommend to proceed to a complete stop and restart after laptop enter the BIOS settings and delete here.

• Need help with the supervisor password

  Dear support,

  I would ask you for help. I have a Toshiba Tecra M5 laptop and 4 years when I install it for the first time, I wonder "supervisor password". I entered my private password and everything was fine. Now, I want to change my internal HARD drive. After upgrading the HARD drive I wonder the supervisor password in a black screen directly after pressing the power button. The problem is that the suppervisor password was entered in windows mode using some Czech special characters "?" (the password is containing these characters). The portable wonder for the supervisor password using a 'back' as intrface - black screen and the blinking cursor and I'm not able to enter these characters Czechs. Can you help me how to do? I'm not able to work with my laptop.

  Best regards, Jan

  Hello

  you have the old hdd to replace to remove the password and replaced by a new one, at this time there?

• Satellite L300: Supervisor password problem

  I just bought a Satellite L300 and installed all the drivers from the Web from Toshiba website.

  I created the user password in the wizard from Toshiba and once I configured the SUPERVISOR PASSWORD.

  But when I tried to enter in the Bios after reboot, the work of doesen't password and in the window when trying to change the user password, it also asks supervisor password and it still says: PASSWORD INCORECT.

  What can I do?
  And why this has happened?

  Hi mate,

  I think that in this case only an auhtorized service provider can help you. If you ave you forgot your supervisor or typed wrong password it can only be removed from an ASP.

  Here, on the site of Toshiba, you can find a list of the ASP s:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Just talk with them a little and they will help you! :)

• 110-1050CA: 110-1050CA supervisor password reset

  My netbook ask supervisor password when starting. How to reset?  After 3 enter press it shows an CNU9287RM3 error code.  Help, please

  @Mini1

  Enter: e9lo7uxb4f (3rd character is a lowercase L)

  Kind regards

  DP - K

• Lenovo G450 blocked supervisor password

  Dear Sirs,

  I tried to remove the supervisor password in the BIOS by writing the old password, pressing 'ENTER' button twicely, then restart my laptop. After that I still see the request of password, but it is not related with my old password and password empty. So my laptop data bloked.

  I want to get suggestions and hear, it's a common situation or what I had done inproperly? If so, then why IBM does not preclude any statement and that pacriculary can help me the IBM support?

  Recently, I posted this problem, but it was closed by the moderator because of "this subject is not allowed to be discussed here, as described in the forum rules. I understand and thank him for the proposed support link, but I have found no support contacts throw in my country (Ukraine). I ask everyone to consult me to keep the rules!

  If your information is under the rules, please answer me by ruslan.voroschuk (at) mail.ru!

  Thank you!

  The problem has been resolved in itself!

  The problem is inspired by leaving it on the 'request password' in the BIOS menu. So after having erased the password of my laptop continues to ask me the supervisor password, I had put forward and remembers correctly.

  But my supervisor password has some symbols such as ',' and it's up to 7 symbols length. I was confused when I heard noises by entering the password and stopped my attempt. After you have entered the correct password not taking into account the annoying sounds, I've unlocked my phone!

  Topics on the fourm causes of 'noise' show me the right way.

  Sorry to put on a misunderstanding!

  I liked my G450 and your nice forum!

  Thank you all!

• Portege M780 + Win10 - is it possible?

  After the upgrade of my Portege M780-10R to win 10 pro or AUDIO and SCREEN TACTILE functions operate.
  I searched updated drivers, but there is nothing that win7 or an earlier version.
  Do I have a possibility to do things to work in winning 10 pro 32 bit?

  thanx

  M780 is not compatible with Win10. The touch screen is not a standard touchscreen device.