which slot to put the Samsung SM951 ssd in

Similar Questions

• HP Jet 11-d000nd: can I put the 32 GB SSD in the stream HP 11-d000nd with a SAMSUNG 840 EVO 500 GB SSD?

  Can I put the 32 GB SSD in the stream HP 11 - d000nd with a SAMSUNG 840 EVO 500 GB SSD?

  No, upgrade to the 32GB of internal storage mem is not possible.

• Advice on moving 1.5 to SATA 2 HARD drive and put the Samsung SSD on SATA 1...

  My plan is to make a DVD of W10 MS

  Power off

  Unplug 1.5 to boot/storage HDD SATA 1

  Connect Samsung SSD SATA 1

  Turning and fresh install MS W10 on SSD and let it update

  Then, can I plug 1.5 to SATA 2 HARD drive and make it just my storage via disk management?

  What steps/tips to make this an easy transition?

  Paul

  It should not matter if you use SATA1 or SATA2, but there are always exceptions.

  I got a motherboard with two different SATA [Intel & Marvel] controllers with different speeds. It is unusual, so the safest bet is to use the same SATA connector for your new SSD that you used for your old HDD.

  Since you have two bootable disks, you may need to go into EUFI/BIOS and set your boot order to boot from the new SSD first.

  You should be able to access the files on the old drive without problems, but I've seen on occasion where you will get an "Access denied" error due to 'permissions' problems, especially if the original/OS disk has been protected by a password. If you have any questions, you can create a linux live boot disk "to access your files.

  Instead keep you the old drive as is, with an operating system and boot volumes on it, you must backup/move your important files to your new SSD then remove all volumes on the old disk, create a volume, and then format to use as a data/backup drive.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• HP 15 r225nl: how to put the hdd to ssd (steps)

  Hello. I need to improve my HDD, ssd, but the coverage (and keyboard) are difficult to disassemble. I removed all the screws from the bottom of my laptop, and then the screws under the keyboard but the coverage don't go out, especially the cover close to the battery and in the corners. So, I'm missing a few screws? Are there other screws under the rubber? I'm afraid of breaking something

  Thank you very much.

  Jpolidor.

  Your manual here.

  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/7486447/model/7669199/manuals/

  Choose the other.

  Start on page 53.

  Tip remove the CD/DVD there are 2 screws that must be removed.

  REO

• How put the 2nd HDD/SSD in XPS 17 L701X-... There is no support!

  I would like to replace my HDD for an SSD, but I want to continue to use the original HARD disk. The XPS 17 has two positions of HARD drive, but only one of them has the bracket. Where can I get a second tranche? None is listed in the list of items on the Web site.

  I'm fine with another type of support that adapts, but so far I paint a white when searching for it.

  >

  This is the part you are looking for.

• Die only lead to T3500 - can I put the new (soon to be OS drive) in the second slot?

  T3500 with single drive

  Windows 7 pro 64-bit

  Original Dell drive (Seagate) is dying, according to Seatools. Cannot get Seatools for DOS to boot so can not do follow-up proposed by Seatools.

  The disk OS must ALWAYS be in the first place?

  Or can I leave the player dying in the first slot and put the new in slot 2?

  I saved the player dying on a disc USB external, and done the checkdisk for several hours.

  New drive (WD) Acronis, so hopefully I can just clone the old drive to the new. But I could always use wise counsel on this part as well.

  You need not connect by USB disk. Connection to a free SATA port will be much faster. You need a cloning utility that you can put on a CD or a bootable flash drive, then just select the origin and destination drive.

• AuroraR5, how many slots m2 on the motherboard?

  Anyone know if there is more than one slot m2 on this motherboard? So, it is the standard Toshiba M.2 NVME 256 GB that comes with the system. But I want to add a Samsung 950 Pro 512 GB IS for more space to contain my steam games.

  Thank you.

  Edit: Read the Samsung 950 SSD Pro is not compatible? If anything, I'll buy one of the most compatible. Just need something that is 512GB :)

  Hello

  Unfortunately, there is only one slot m2.

• Samsung 830 SSD 256 GB compatible with ThinkPad X220i?

  I am considering buying the Samsung 830 SSD 256 GB of disk, but want to make sure that it is compatible with my X220i ThinkPad. I'm sure it is, but I just want to be absolutely sure before you go ahead and spend the money.

  With compatible I mean, physically, he'll be back in the TP without problems. Thank you.

  According to PSREF, the X220i requires an SSD with these specifications, "SATA 3.0 GB/s, 2.5" wide, 7 mm in height. "All the new SSD sold today run at SATA-III (6 Gb/s) but not all are 7.0 mm thick. As long as the Samsung 830 is 7 mm thick (as opposed to the old 9.5 mm) then it should work perfectly.

  Some manufacturers, for example Crucial M4, sell the 7mm and 9.5 mm variants of the same model. If Samsung is similar so make sure that you get the right variant.

• Put the new upgrade of Windows 10 on my 500 gig SSD and make the main drive (C :)

  Original title: Windows 10

  You want to install (upgrade) new Windows 7 Pro 64) Windows 10.  No problem.

  Here's my question and need help.  I want to put the upgrade of Windows new 10 on my 500 gig SSD and make the main drive (C :)  Just got new PC and the SSD is not yet installed in the new machine.

  Is there a way to do this?  I can install the SSD drive in the pc without problems.  But the pc is set up with the C: drive in the primary.  As I understand it, the update will work, but it will not be for the SSD.

  Suggestions?  Is this possible?

  Windows 7 installation will have to be eliminated if its currently on a separate disk. Which means you have to start over.

  I would first disconnect the hard drive with your Windows 7 installation.

  Install the SSD drive, then install Windows Pro 10 on this subject.

  Download and create a bootable copy of Windows 10 Pro:

  How to download official Windows 10 ISO files

  Demarrer start from the installation media, and then select the SSD during installation:

  How to: perform a clean installation of Windows 10

  Reconnect the hard drive, then format the installation hard disk.

  Option to consider:

  Create an image of the installation of Windows 7 system restore it on SSD, and then upgrade to Windows 10.

  How to pass Windows 7 to a bigger hard drive - books...

  Disconnect the hard drive, connect the SSD drive, then restore image and then upgrade to Windows Pro 10

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check out the YouTube video below:

  How to properly set up the SSD as boot drive and the HARD drive...

• Better way to clone the hard disk SSD evo 850 samsung

  I want to clone my current HARD drive to SSD samsung. The problem is that the OEM partition (100 mb) is not cloned with the Samsung tool. What is the best way to keep that partition? Should what tool I use? If I do a fresh install of windows 7 with the Dvd from Dell, it will recreate this hidden OEM partition? Thanks for your advice.

  I've used easeus http://www.easeus.com/disk-copy/ succesfully maintaining OEM partitions and recovery.

  I used it to cram a 750 GB HARD drive which had plenty of free space on a 250GB SDD while preserving the OEM partition with the diagnoses.

  I used a USB to Sata adapter and it was really easy.

  It goes without saying, but... BACK UP DATA THAT YOU CARE ABOUT THE FIRST...

• Satellite U845W-S400 - how to open the laptop to put it in an SSD

  Hi all

  I would like to know how to open the laptop to put it in an SSD.

  There are 6 screws on the bottom, and I guess that some under the keyboard.

  I don't have a guide but to know for sure where they are before I start prying things open and could even damage it.

  Any help would be really appreciated since I couldn't find anything on the web.

  Kind regards
  Robin

  Stand by.
  You may have a defective stupid question but not SSD inside, or you want to upgrade HDD with SSD?

• Can I put the SSD on my Z Satellite series?

  Can I put the original (128 GB) SSD 256 GB?
  I can screw the back cover?
  Who has experienced this?
  THX,
  Erik O.

  Since the SSD is not accessible to the user you can void the warranty if you open Notepad.

  The SSD can be improved, but you need an SSD 1.8 "mSATA. A standard 2.5 "SATA SSD does not.

• I have a laptop Windows 7, which says it's the upgrade. It puts in place upgrade now page for more than 5-6 hours.

  * Original title: upgrade Windows 10

  I have a laptop Windows 7, which says it's the upgrade.  I leave work on the upgrade to Windows 10 on 2 different days and no luck.  It puts in place upgrade now page for more than 5-6 hours.  Any help?

  Jeff

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to do the ph

  I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to make the phone number in the clickable query. I know the code to do it well not in a query. What is the code?

  As far as I saw, most of the smartphones will automatically recognize it these days, as long as the number is written in a format of regular phone number. This format also allows to make images or text other than a telephone number in a tap to call the link.

  Looking at what you have presented I guess it would be something along the lines of...

  urmcell>>">urmcell >

  When the location of the link and the link text would be the same variable.

  I've never worked with Intelliclick so above is a wild guess. They would be those who need to ask themselves if there is a way to fill in the address of a link like that.

• put the HARD drive in the optical drive stock

  Hi all

  I'm sorry if this is redundant, but I couldn't find the answer to any where or through telephone Support from Lenovo.

  I received the W530 with stock 500 GB HARD drive, but I want to replace it with the Pro of 840 Samsung SSD and put the HARD drive in the optical drive. I just restore the image from HARD disc for my SSD orginal (now in the original HARD drive box).

  At first I thought that I just leave the HARD drive in the original Bay and use the optical drive for the SSD, but since I use the SSD for the OS, and I want to use the DVD player sometimes, I thought I should put the SSD in original HDD bay and the HARD disk in the optical drive.

  I'm sure I've read that a lot of people did it with success, but I do not know much about computers and have never done nothing wise hardwear. I tried to put the HARD drive in the caddy Newmode U.S. optical drive, but it wouldn't fit (the screw on the caddy heads are too big). I think it's because the HARD drive still has the metal casing on it. I am worried, however, that if I remove the caddy, it voids my warranty, and above all, I am wanting to make sure it is the correct and safe way to the stock HARD drive in the optical drive.

  I put the rails HARD original on the SSD drive rubber because it is in which Bay but you have no other rails to the HARD drive in the case of the optical drive, and I don't even think he would fit in.

  So, it's OK to remove the carriage on the stock of HARD drive and put it in the optical drive without any kind of rails or protection (but attach it to the optical drive with the supplied screws caddy)? I think that's what I have to do anyway with the SSd, if she had to go into the optical drive.

  I am also an upgrade of RAM, but the keyboard under the bottom access RAM screw is stripped, so I can't remove the original RAM (it is under keyboard) and use the optimal 0 and DIMM slot installation 1. Any ideas?

  Thanks for your time, and once again, sorry if this is very basic.

  Change hard drives and memory do not void the warranty.

  The DSS must be installed exactly as the original HARD drive was, with rails caddy and rubber.

  The HARD drive in DVD case must be inserted with the 4 screws with the caddy, nothing else.

  To remove the stripped screw, you must use the small (jeweller preference) needle clamp with extreme caution, or slowly drop the screw head to create a new location. The second option is more dangerous because it produces small deposits of metal. If you can't do it yourself, ajeweller could do this easily for you.

  Good luck!