Error: A parity error was detected on \Device\Ide\IdePort0 at system startup

Similar Questions

• What does "a parity error was detected on \Device\ide\idePort0" mean and how can I fix?

  I have a Pentium 4, XP SP3, 2 HDs installed, and I don't think I have SCSI but in my registry, it shows the HDs and two CD - RW and DVD drives listed under SCSI and there is no topic such as IDE, Atapi or AT (the area I'm talking about in the registry is: \HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\) so I don't know what is happening in this area...? Anyway, everything else refers to above devices IDE or Atapi etc..

  As well as the above parity error, I noticed a little more that I will add here:

  "The driver has detected an error on \Device\Harddisk0\D controller" (this is an ALL NEW HD)

  "The device, \Device\Harddisk1\D, has a bad block" (it's second HD giving the same error msg, the last HD failed and this is used)

  "The device, \Device\CdRom0, has a bad block" (this is my CD - RW drive, which seems to work very well, it's the DVD player that is not working properly)

  "While validating this \Device\Serial0 was really a serial port, a fifo was detected. The fifo will be used. »

  All of these errors are coming together for the most part. Please help as I just replaced a hard drive failing during the summer, now it is looking like another is a failure, but I want to know if something else in my computer can cause drives to fail, or causing errors in some way, or any other information anyone can give me to help before you start the process of replacing a HD failure (again!)

  Thank you... Denise

  Hi groovydee,

  Method 1

  I suggest you reinstall the controller and chipset drivers by contacting the manufacturer of the computer, check to see if it helps.

  Method 2

  If the previous step fails, then you need to check disk scan on the hard drive to scan and difficulty of bad sectors on the disk.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: While running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this area if all the data available in this area may be lost.

• While in "Event Viewer-System", "an error was detected on device\Device\Harddisk2\D during a paging operation what is this error,"D"drive" is a dvd - rw drive empty on the front of our Tower? :

  We had the people that our PC reconstruction after an accident some time ago, say "it seems that the Windows swap file was somehow moved on the disk"D", and it should be on the main 'C' drive.  Microsoft sent us an email with instructions on how to reset the Windows paging on 'C' drive system and to reset the minimum and maximum space allowed for it.  We did it, but the ' warnings are still there. " The "D" drive is a drive of dvd - rw empy on the front of our Tower.  Most of the time it is empty, as it is now.

  What are they and how to fix it?  I'm 73 years old and still learning.    Grandpa

  Hello

  Check to see if that helps!

  http://www.techsupportforum.com/forums/F16/event-ID-51-nf68i-an-error-was-detected-on-device-device-Harddisk0-d-during-a-PAG-273585.html

  http://support.Microsoft.com/kb/244780/en-us

• Backup associated with repeated warnings ID 51: an error was detected on device \Device\Harddisk1\DR1 during a paging operation (or \Device\Harddisk5\DR5)

  I just found out about 7 000 event ID 51 warnings in the event viewer.

  These warnings began when I started using an IEEE 1394 external drive for backup. I can't say if the more than 7,000 warning messages started after formatting, or when the backup began.

  About 5,000 messages occurred during the first backup which lasted several hours, back on February 24.

  All of them had: an error was detected on device \Device\Harddisk5\DR5 during a paging operation.

  Managed backup done this night here and as far as I know. (I don't look in the observer of events at this time.)

  The next day, at 11:00, the messages have started, but this time in bunches of a dozen or less within one or two seconds. And they all change to this:

  An error was detected on device \Device\Harddisk1\DR1 during a paging operation.

  Since then, the warnings occur sporadically. The backup program ran on 28 February, and produces over a thousand more. A group that's happened when I tried to back up the registry to a subdirectory on the drive yesterday.

  What is strange, is that the drive seems pretty much OK. Backup completed without error. I can copy files to it, and then copy it.

  Given that these are warnings, is this correct? A driver problem?

  the drive is using 6.1.7600.16385 (win7_rtm.090713 - 1255)

  I formatted just before using it for the backup. These are the old years, but we never had any problems with it before.

  Any ideas on how to understand what is happening?

  You can also try changing the driver firewire to INHERIT one. (Device Manager, Bus IEEE 1394 controller, software update driver, browse my computer, let me pick from a list... Choose the line of inheritance in it.

• event ID #51, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC0000188

  2 weeks ago I started to do, the driver has detected an error on \Device\Ide\IdePort0 controller, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC000018. Event ID #51, #11 bottom line I check the disc, I restarted computer sometimes the logical disks and primary transmission is up to leave after a certain time.  About 6 months ago I bought a new car because I had the same problem.  I had checked, adjustment, cables, power, bios, software update settings, BIOS and decided he could be the player.  I used manufacturing software troubleshooting - the drive past all the test.  I used the S.M.A.R.T. test - it past.  As I said I check disk found nothing.  However, I deleted and brought another drive.  Now, I get the same indications listed above.

  Hi Robert,.

  I'm glad that you posted the request in the Microsoft community. If I understand correctly, you get an error message indicating boost loan session interrupted because of an error.

  Here is an article that talks about the error you are getting. Go through it and check.

  Here is an article on Ready Boost. Have a look at.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Windows crashes every 10 minutes for abt 30 sec / 2 min with «the pilot detected an error on \Device\Ide\IdePort0 controller»

  History/context: This problem started happening on my Dell Vostro 220, while he was new (May 09), on Windows Vista that it came preloaded with. I figured a SATA controller and a defective Dell replaced both my HD (& SATA cables) and Mobo. But ongoing problem - then Dell suggested to set access drive in AHCI mode in the BIOS. I did and in HD and installed also XP. Problem persisted. XP errors in the journal system came as '\Device\Ide' and '\Device\Hd0' sometimes sometimes. Reference Dell insists that it is a driver problem Windows. Since then, I still formatted hav clean and installed with Windows 7, what I use now. But the problem persisted.

  System:
  Dell Vostro 220 with Intel Core 2 Duo E7400 @ 2.8 Ghz, 4 GB of RAM (3 GB usable), running Windows 7 Professional 32 bit. 1 x DVD Writer TSST Corp TS - H653F ATA hard drive WDC WD2500AAJS - 75M0A0 ATA

  Symptoms:
  On bad days, it happens every 5-10 minutes; other times 30 min. Locks up system / freezes during 30 sec to 2 min during which I am able to move the mouse cursor, but do not click on anything anyone or do anything else. When Frost "thaws" if I check the Logs of error in the system log I still see the "EventID:11" error "Source: atapi ' 'driver has detected an error on \Device\Ide\IdePort0 controller. Sometimes (not always) I also see a spike in the graph of CPU use if I check right after the "thaw", but I was not able to determine what process as I am looking after the fact. Normally, there are 4 SATA Ports on the motherboard. 0.1 were used for HD, DVD. If I unhook the DVD drive altogether and connect the HD SATA cable to the port marked 2, I get the same errors, but "\Device\Ide\IdePort0" becomes "\Device\Ide\IDePort1".

  Other note (s): During the installation of the OS, Dell has a "Intel Matrix Storage" listed as critical on their site, but when I try to install it, it says "no compatible hardware not detected" and install exists.

  Also, interestingly, if I take the HD (in blue) to the total of SATA cable and try to connect SATA cable from the DVD recorder to the orange (originally) between individual ports Mobo and HD, I get a mobo error - flashing 3 light and "beep" as soon as I turn on. It disappears if I go back to blue SATA cable from the Hd for HD

  Hello

  As you have informed us that you are always faced with the question after installing Windows XP and Windows 7.

  I suspect that the problem is somewhere in the material or the SATA ports on the motherboard. I suggest you to contact the manufacturer of your computer for help, because they will be in a better position to help you.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ATAPI - event ID:11 - the pilot detected an error on \Device\Ide\IdePort0 controller.

  I'm getting following error in my event log Watcher:

  Log name: System
  Source: atapi
  Date: 2009-11-01 01:18:38
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hendrim-PC
  Description:
  The driver has detected an error on \Device\Ide\IdePort0 controller.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      53536
      System
      hendrim-PC
     
   
   
      \Device\Ide\IdePort0
      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000
   
  

  Anyone any idea what is the cause?

  I replaced all the cables and hard drive but I get the same error (wasted money).

  When you start the PC and get "PIO MODE" in computer/manage/Device Manager / IDE ATAPI controllers ADA / ATA Chanel X/properties/Advanced is the cause, your PC is frozen.

  My "temporal" solution for this problem is:

  1 - Turn off the PC.

  2 - pick Up and the hard drive cable through the same port of the motherboard

  3. start the PC and the control in the advanced settings box-> "Ultra DMA Mode 6"; right now, you can work without problems.

  * If you can trade your motherboard (all under warranty) DO!

  -. - We are all waiting FOR you than get Microsoft a solution to force the departure to the top of "PIO MODE" to "ULTRA DMA 6"

• A fatal bus error was detected on the function of the peripheral bus component 0 7 0

  Hi all

  I'm trying to diagnose a hardware problem with my Dell PowerEdge R410. The problem occurred after a kernel patch and reboot linux security (I'm under Ubuntu 14.04 and I'm on Linux 3.13.0 - 100-generic). Initially, the machine would crash when starting in the BONE, but I managed to do always start too.

  I see the following errors:

  --------------------------------------------------

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on the function of the peripheral bus component 0 7 0.

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on an element at location 1.

  ----------------------------------------------------

  I'm having a hard time figuring what component, it exactly. Here is the result of lspci:

  ------------------------------------------------------------------------------------------------

  00:00.0 Host bridge: Intel Corporation 5500 IO Hub port ESI (rev 13)
  00:01.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 1 (rev 13)
  00:03.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 3 (rev 13)
  00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 7 (rev 13)
  00:14.0 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub System Management records (rev 13)
  00:14.1 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub GPIO and Notepad records (rev 13)
  00:14.2 PIC: Intel Corporation 7500/5520/5500 / X 58 control status of e / Hub and RAS records (rev 13)
  00:1 a. 0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
  00:1 a. 1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
  00:1 a. 7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #2
  00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
  00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
  00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
  00:1d.3 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
  00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #1
  00:1E.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
  00:1F.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
  00:1F.2 IDE interface: Intel Corporation 82801JI port (ICH10 Family) SATA IDE Controller #1 4
  00:1F.5 IDE interface: Intel Corporation 82801JI port (ICH10 family) SATA IDE Controller #2 2
  01: 00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  Serial Attached SCSI 03:00.0 controller: LSI Logic / Symbios Logic SAS2008 PCI - Express Fusion - MPT SAS-2 [Falcon] (rev 03)
  04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)
  Fe: 00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture generic Non-core records (rev 02)
  Fe: 00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture system address Decoder (rev 02)
  Fe: 02,0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
  Fe: 02.1 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 0 (rev 02)
  Fe: 02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port link 0 (rev 02)
  Fe: 02.3 Host bridge: Intel Corporation Xeon 5600 Series mirror Port link 1 (rev 02)
  Fe: 02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
  Fe: 02.5 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 1 (rev 02)
  Fe: 03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
  Fe: 03.1 Host bridge: Intel Corporation Xeon 5600 Series Memory Controller target address decoder built-in (rev 02)
  Fe: 03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
  Fe: 03.4 Host bridge: Intel Corporation Xeon 5600 Series integrated Memory Controller Test Registers (rev 02)
  Fe: 04.0 Host bridge: Intel Corporation Xeon 5600 Series memory controller channel 0 control integrated (rev 02)
  Fe: 04.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 0 address memory (rev 02)
  Fe: 04.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller 0 (rev 02) grade channel
  Fe: 04.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 0 control thermal (rev 02)
  Fe: 05.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 controls memory (rev 02)
  Fe: 05.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 (rev 02) memory address
  Fe: 05.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 row (rev 02)
  Fe: 05.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 control thermal (rev 02)
  Fe: 06.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 controls memory (rev 02)
  Fe: 06.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 (rev 02) memory address
  Fe: 06.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 rank (rev 02)
  Fe: 06.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 controls thermal (rev 02)

  ------------------------------------------------------------------------------------------------

  So, one of the components seems to be "00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 hub of e/s PCI Express Root Port 7 (rev 13)", but I'm not clear as to what this component is
  and what it connects too. Crack, "a fatal bus was detected on an element at location 1." seems too vague. What is slot 1 in this case?

  My questions are:

  What components apply to critical errors?

  I have to do things in the following order:

  -Unplug the power cord and hold it for 20 seconds
  -Firmware updates
  -Try reinstalling components
  -Replace parts

  PS. I'm no longer under warranty

  Thank you

  Dave

  Hello

  Location 1 must reference slot PCie 1. It is very likely the slot in which the PERC controller is. Your order of troubleshooting is correct. If it's the only occurrence, resettlement and the firmware update are probably enough.

• Windows backup default - Eventvwr shows error on \Device\Ide\IdePort0 controller

  Hello

  I'm at my wits end. I got the error 0 x 81000037 when you run backups windows recently. I am backing up to an external USB drive.

  I went through the entire analysis point fix, I run scans antivirus complete and deleted all quarantines and I have now deleted all audio-visual products. I tried to back up selected folders, clean boots and I'm still not able to run a backup. However, I'm now not only this error code, but others.

  Looking at the event viewer, it seems that each backup error is preceded by 11 on atapi event: «the pilot detected an error on \Device\Ide\IdePort0 controller»

  I don't know what it is, but I wonder if this is what is at the origin of the problems, and if so, is this a problem with the external USB HARD drive or internal one.

  Can anyone help? I'm desperate to save my files.

  Hello

  You might face this question when the competent services for backup are not running, you can also face this question when the chipset drivers are corrupt. Make sure you don't have any other external device connected to your computer outside of the mouse and keyboard. I suggest you to make sure that the following services are running and set to automatic.

  Shadow copy volume

  • Windows backup service
  • Engine block of backup Service level
  • Windows event log
  • Task Scheduler
  • Click Start, click in the start, Search , type services.mscand then press enter and then check the benefits described above, one by one.
  • You can follow the steps in the link below and check if it helps you.
  • Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  • http://support.Microsoft.com/kb/973455

  You can also consult the steps proposed by Stephanie Podder dated 8 June 2013 , the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/event-ID-11-source-ATAPI-the-driver-detected-a/1c45a710-596f-468C-970D-74858d0a96b6

  Let us know if you need additional help from us.

• Satellite P300-156 - driver detected on \Device\Ide\IdePort1 controller error

  Hello

  I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I get 11 event IDS in the event log system "the driver detected a controller on \Device\Ide\IdePort1. error" and suffer with very poor performance with this player.

  The drive is new and works fine in other systems and even works ok if I swap bays my P300-156, but the problem with this is that the drive does not fit in the other Bay, as it is quite thick. The player in question is a Samsung HM100UI 1 TB 2.5 "Sata. I also tried other readers in this Bay, and they work well too.

  I am using windows 7 ultimate and the Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, the 7.0.0.1013 driver version. Have tried different drivers and the AHCI/IDE mode. Also tried a new installation and the problem persists.

  Am at a loss why this disc problems is there anything else someone can suggest to try?

  Thanks in advance.

  > I also tried other readers in this Bay, and they work well too.

  This means that you had problems with the other drives in the second span?
  If Yes, then I guess some problem of compatibility between the P300 and the HARD drive

• Pavilion 500 - C60: new office reads, "ERROR: no boot disk was detected or the disc has failed" at startup.

  Just bought Pavilion 500 - C60, running Windows 8.1 64-bit and am doing everything on old HP running Windows Vista Home Premium SP 2. Has not gone smoothly from one thing to another, but I think everything comes together. A couple of days, began to receive the error message at startup or, if I COULD do so that it starts would go for awhile and then would get an ERROR message, requiring restart. Usually after obtaining the error message several times, the computer would then initialize. Tonight, I couldn't override the error message for anything! When you press power button / stop, I hear (HD) running for a few seconds, everything is silent, and then the error message appears on the gray screen dark in white letters, BACK very and sinister looking! Any suggestions? Had the computer about two months and it has not been easy.

  Not good!  Check all the connectors and the hard drive to make sure that they are correctly wired in place. Make sure that your cable is not reversed.

  Contact the seller if still under warranty for repair.  This could be the hard drive or motherboard and the problem lies the only diagnosis from a repair facility.

• Error no audio device installed"on my system

  Why I don't get error message "No audio device installed" on my system when I have not made any changes?  Can't listen to music, DVD, etc.

  Why I don't get error message "No audio device installed" on my system when I have not made any changes?  Can't listen to music, DVD, etc.

  ============================================

  The following article might be worth a visit:

  Error in Vista: No Audio output device is installed
  http://support.HP.com/us-en/document/c01695430

• Acer-V5-573PG not detect bluetooth devices

  Hello experts.

  1. I've upgraded to Windows 8.1.

  2. install the latest driver for bluetooth (Atheros 8.0.1.316) of http://us.acer.com/ac/en/US/content/drivers.

  3 Bluetooth detects attached devices at first then suddenly not connected after a few seconds. I tried to send and receive a file, it works fine.

  4. in windows 8, whenever I connect it is a window will open where you can view the files from a device connected to my PC. This disappeared in windows 8.1.

  5. can I search the web for solutions and tried applying thos mentioned here:

  a. http://community.acer.com/t5/Notebooks-Netbooks/Acer-V3-571G-Bluetooth-not-working-on-Windows-8-1...

  http://www.wiknix.com/solved-Bluetooth-device-not-working-in-Windows-8-1/ b.

  6 restarted my PC, tried (a.) above, press Fn + F3 once on at logo and the spinning of Acer points.

  7 activate my bluetooth... NOW BLUETOOTH CANNOT DETECT ALL DEVICES MORE.

  8. don't restarted my PC, tried (a) above, press Fn + F3 two times, not good, rebooted, tried 3 times, still no good!

  9. (b), but it still does not work. I can't detect all devices.

  10. I tried to uninstall the bluetooth driver on the Device Manager and to uninstall Atheros Bluetooth + WLAN on programs, rebooted and then install Atheros. Still, it cannot detect bluetooth devices.

  11. system restore I've tried, on the normal mode and mode without failure, but system restore always display an error on not access the file because of the antivus... but I've already uninstalled my antivirus and disabled windows defender and firewall.

  Help, please.

  Now, I solved the problem. The problem is actually the old version of bluetooth suite could not be uninstalled when you uninstall in the devices or uninstall atheros bluetooth Manager suite + wlan in windows uninstall program. I solved the problem by following the instructions on this link: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/unable-to-uninstall-atheros-blu...

  And then install the following bluetooth 8.0.1.316 I got to asustek site.

  Thank you by the way.

• The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1

  Intermittent crashes. The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1. How can I find this device? This is probably a hardware problem?

  I look at intermittent crashes, where my cursor becomes an hourglass and the system does not yet meet the ctrl-alt-delete.  In the case of a newspaper, I find

  Event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1.

  How can I determine which physical devices this is associated?  This indicates a hardware problem, or driver or firmware may be the source? The system has worked very well for a few years.  I'm not aware of any change in software that took place recently, although I have had by force, remove and reinstall iTunes earlier.

  I run SMART on all players controls and run diagnostics.  I ran chkdsk on the one I found the culprit, but not mistakes.

  Just in case it was a deadlock linked to memory, I tried to use the Diagnostics memory Microsoft on floppy, but it would not write on the disk (even if I could format and copy the files freely).

  Hello

  Go to your configuration and see which drive is for each port; 1,2,3,4...

  Then go to the Device Manager and look at how many SATA controller you have and how many ports for each, then start count from 0 to IdePort0, 1, 2, etc. for each SATA controller, so if you have 4 ports for each SATA controller, here is how you came from:

  IdePort0 1 -, 2 - IdePort1, 3 car - IdePort2 and road 4 - IdePort3 in the order of road by car

  I hope it helps

• The driver has detected an error of the Comptroller on \Device\Ide\IdePort3

  Hello

  I'll try to explain my problem as best as possible in chronological order then please bear with me.

  I have Windows 7 x 64.
  So last week my PC have been freezing every two days. Sometimes every day. Black screen during the games, navigation or doing any activity. Each window has frozen, the screen went black. ctrl alt del did not work no response to any entry, the only option was to restart.

  Once restarted, the system would freeze again almost immediately, and again after another reboot. Only solution was physically turn off the computer, turn off the power and wait.  After some time (5-10 min) I turn the power on and system worked very well.

  I went to the observer of events and found "the pilot detected an error of the Comptroller on \Device\Ide\IdePort3." It took place in a series starting with a per minute, then after a few minutes, two or three that occur within one minute, the frequency of this error would be gradually go back even to 10 per minute and that's where the system would freeze.

  Looking at the event viewer I thought, hold for a second I have 3 discs (Disk0 - new SSD, Disk1 - new HDD, Disk2 - old HDD) so maybe that ideport3 refers to the CDROM which I disconnected but the error has not disappeared.

  Check the BIOS settings and deleted everything that had no boot from the internal storage (so: floppy USB - disk, CDROM,)-which did not help either.

  In the Act of desperation, I unplugged my old disk (Disk2) for 6 days I have not known of IdePort3 errors and system will work very well.

  After 6 days, to my embarrassment, error returned.
  This is the story of the appearance of the error:

  10/05/2015 19:56 - after that, I unplugged old hdd
  16/05/2015-09:35
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:35
  16/05/2015 14:36
  16/05/2015 14:36
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015-17:28
  16/05/2015-17:29
  16/05/2015-17:31
  16/05/2015-17:33
  16/05/2015-17:33
  16/05/2015-17:34
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:37 - after this system error stopped

  Here are the details of the error

  -
  -
   
    11
    2
    0
    0 x 80000000000000
   
    107016
    System
    Odin
   
   
  -
    \Device\Ide\IdePort3
    0000100001000000000000000B0004C004000000850100C00000000000000000000000000000000001000000000000000000000005100000
   
   
   
   
  Let me know if you all the news and thank you for your time in reading my number.

  I bought the card mother-GA-Z68X-UD3-B3 3 years ago. There can be no IDE ports. It has 6 SATA ports.

  Here an explanation somewhat losely formulated to work on the port that could be the culprit. Since you have 6 SATA ports, why not play the game of elimination with them?