White balance presets

Similar Questions

• SOS... I don't know what is happening, but when I import the photos to LR5, looks like I have a "Preset" which I did not and the white balance becomes 'custom '... You have an answer that I can solve this problem? Thank you.

  SOS... I don't know what is happening, but when I import the photos to LR5, looks like I have a "Preset" which I did not and the white balance becomes 'custom '... You have an answer that I can solve this problem? Thank you.

  Possibly, you have made changes to your 'by default develop settings'. The default WB in Lightroom should be "under the shot" to view this selection has recently imported a file raw in the develop Module, click history in the left panel, click on the first import. (see screen capture) and then see what settings have been applied to import for the white balance it must be 'in the know '.

• Manual white balance

  Is it possible to do a white balance with a white card with the F55? I found only 3 presets and a memory.

  Two ways:

  The old way--set it to memory. Press MENU-> Camera-> white-> automatic White Balance.

  The new way - set it to memory. Then, press camera. The Panel buttons three side albums should show "Color bars", "White car" and "Auto Black." If this is not the case, press the camera again. Press Auto White and then run. More time to describe, faster to do!

• Canon 5 d Mark ii Images with the value of the white balance fixed. When they are imported into Lightroom, the value is different.

  If I take a shot with the fixed value of 5200K WB (5 d Mark ii) and import into LR 2015.2.1, happens to 4850K. No presets or applied adjustments.

  No idea why? How can I solve this problem?

  Rich

  All raw converters use four multipliers of white balance RGGB tinted and embedded in the raw file EXIF data to set the white balance and 'calculate' the temperature values displayed inside the module development LR WB.

  Scroll down to the "White Balance" section of the DCRAW tutorial PDF here: GUILLERMO LUIJK > TUTORIALS > DCRAW TUTORIAL it's all so raw converters all the rest of the white raw file and 'calculate' the temperature and tint values.

  Here is a Canon 5 d MKII CR2 file with the White Balance adjustment 'in the know' behind closed doors:

  (Data EXIF Maker Notes)

  

  The setting "As Shot" WB in LR shows a Temp of 4800 reading, which should produce a slight visual difference that the planned in-camera closed 5134 parameter, correct?

  

  However, with the LR settings file, "As Shot" above the white balance CR2 is the JPEG file in camera perfectly on my Canon 5 d MKII (raw + JPEG file format). It's just that Temp readings do not, because they are "calculated" four RGGB multipliers. Each raw (LR, opening, C1) converter will probably show the values of temperature and tint different, since they are derived by using "reverse engineering" of the manufacturer of exclusive camera raw data structure and camera sensor response file.

  Keep in mind that the spectral response of the camera is affected by changes in batch. A Canon 5 d MKII body can produce slightly different WB as one another using the same exact settings. Rather than depend on private clos or LR presets use a good white balance card or the ColorChecker Passport to 'calibrate' LR white balance settings standard shooting conditions (daylight, cloudy, Flash, etc.). For critical projects draw card of the white balance at least once for each unique lighting condition. You can then determine the correct inside the LR setting and settings of synchronization of the World Bank through all the images taken with this specific lighting.

• picture change the white balance that has been implemented in the device after its import in lightroom 5

  My pictures change the balance of whites and the global settings that have been implemented in the unit after its import in lightroom 5. Met someone with something like that? Thanks to you all.

  Alex

  Screen 1 - this is what it looks like right after the import. The white balance is correct and just need a few changes.
  

  

  
  

  Screen 2 - However, In a few seconds it turns into this by itself. This can also happen when editing is finished, if I remove the image in Lightroom.
  

  

  Screen 3 - in order to restore it to a certain extent I have to select the predefined filter called 'Zero '.

  

  That means that you have inadvertently applied a preset import to have checked in the preferences of your Auto adjustments:

  

• The imported images are given 'flash' like the white balance

  Given that I've implemented LR3 and played among others with presets, all of my (RAW) images to import are transformed to the white balance 'flash', as stated in the right column of the library and as can be seen in the picture.

  The images out of the camera with a wb-info than that set to the camera during the filming of the picture, so no problem with the camera. So I suspected a few preset, but impossible to find. Then I imported the Photoshop 4 files and elements, and exactly the same thing happens: they immediately convert to the flash WB. Yes, there is a settings file that is shared by all three programs?

  I checked the same files on my lap - top with LR3 and there LR shows the WB settings that I put on my camera. so the problem is with the settings on my PC.

  Someone has an idea how to get rid of this setting?

  Rob

  Rob,

  Could you define a default camera containing Flash WB by chance at a given time. In the LR develop Module, choose expand/Set Default Settings and click 'Restore Default Settings Adobe'. If you used other default settings applied consciously (as a non-standard camera profile), you will need to give them.

  Gossweiler beat

  Switzerland

• Adding photos to change the white balance

  When I add photos in Lightroom 3.2 from my hard drive, thumbnails have the original white balance, but imported and all images have a yellow tint.  My develop settings are set to None.

  It is difficult to understand the details that you have given to date, what is the problem. From my experience, there are three possible reasons:

  1. corrupt monitor profile. The fact that the photos seem to 'well in Windows' does not mean that this reason may be excluded. Most of the applications in Windows are not color management and cannot be overturned by a screen maybe corrupt profile. And even if they are, they might not behave in the same way as Lightroom with some of the ICC v4 profiles.

  To prove that this is not a matter of profile, make sure you remove the monitor profile form display properties or replace it with along with the sRGB profile. Or, after a shot of creen tinted yellow to image in the development with the visible histogram module. If the historgram has the yellow tint also, then - it's profile.

  2. develop predefined import or custom default to develop. Check if you do not apply a develop preset import, or if you have applied a default of custom development. Select an affected image that has not been adjusten in Deleop somehow (the + / badge is missing on the thumbnail) and check each slider on each Panel is equal to ZERO or to the default position. Check if wihte balance is set to "As shot" rather than "Custom".

  3 Lightroom rendering is very different from your camera. Yet one thing that's confusing beginners is how Lightroom rendering is very different from what they see on the LCD screen of the camera or camera previews incorporated which appear briefly after importation, before Lightroom manages to make its own version of the RAW file. I guess that is not the case here, since you say you are having the same problems of JPEG files. But, just in case where, thanks to upload a file raw for us to consider here.

• iPhone 7 problem of camera Auto White Balance

  Hi guys, got my new iPhone 7 and had been shooting a lot of pictures with it. I noticed that all my whites in my photos appear yellowish and sometimes yellow in my photos may appear to be white / or with deep shades of yellow. I had attached 2 photos I took of a white wall in my office. 1 was captured by immediate shot in the camera application, while the other was shot after the camera go off focus. Not sure if it is a problem of software with the White Balance automatic camera or a hardware fault. I hope to hear advice from the community!

  

  

  I have iPhone 7 more on her white balance seems also more hot (more yellow) than the iPhone 6 s more.

  Friends with iPhone 7 also reported the same problem. Photos of the iPhone 7 more looks unnecessarily hot and yellow tinted.

• white balance and other options change

  Hi, I've been away from taking pictures for awhile (focusing on FCP - X & videos). I've noticed recently that Apple has moved things from iPhoto to Photos. Whatever... My biggest concern is how I color balance and make the picture white balance? I've lived everywhere I thought it would be, but not luck. Can someone advise me on how to make these pictures? If this isn't the case, I can do them in iPhoto and continue to use it, or I don't expect too much from Apple?

  I always iPhoto V 9.6.1 addition Photos V 1.3

  If there are tutorials or somewhere you can direct me to know how to deal with this change, I would be very happy.

  see you soon,

  Jack

  Photos done editing capability than iPhoto.  However, you must go in the adjustment mode in the edit window and click on the button Add blue.  Then check all the items in the list:

  

  and click on Save as default down.  Now, you will have the following in the setting mode:

  

  The function address is in the mode of culture.

  

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Can anyone recommend an app for white balance?

  I would like white balance to the photos of items for my online store. Can anyone recommend an app that can make white balance?

  On Photos white balance is not sufficient to your needs?

  You can set it to balance the color using neutral gray as a sample or a skin tone.

  

• Camileo H10 - White Balancing does not work

  I bought this recorder in December 2008. I tested some records inside, outside and I found, that White Balancing does not work.
  I can put it in automatic or manual, but all videos are little pink. Is this a firmware problem or is it a bad piece? Where can I get the new firmware?

  Thanks for the reply

  Hello Bunak

  Toshiba has released the new update and you can find it on Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads
  On the drivers download page please choose the criteria for follow-up:

  Product type options
  Family digital Imagin
  Range of digital video cameras
  Camileo H10 model
  OS operating system practice
  Type of driver Firmware update

  So here you can find the update to Firmware version 1.1. Last modification date is 12/02/08.

  In order to provide the best quality, update Firmware for Camileo H10 results with feature upgrade as follows him.

  1 give input MIC (improve the volume of MIC)
  2. set the focus window (improve the AF)
  3 tune AE to avoid exposure
  4 tune matrix color and saturation (performance of color)
  5. set the noise filter (improve the noise level)
  6. grant WB (improve the AWB)
  7 change the string from the user interface in CZ

  Here the steps how to upgrade the F/W (Firmware):

  First of all, there are two different language version of the UI (User Interface) of the EU & UK and EEMEA version. Please select the appropriate according to your language file instead.

  -EU & UK F/W version 1.1 include: English, Deutsch, Español, Português, Italiano and French, Dutch
  -EAST F/W version 1.1 include: English, Czech, Greek, Hungarian, Polish, Russian, Turkish, Slovak

  * Files of F/W 1.Copy to an SD card *.
  -Format SD card. Make sure that the FAT file system is selected before formatting.
  -Copy the F/W (zburnT_C10.run.elf and DCIM folder) files in the root directory of the SD card
  (PS: there is another folder and file in the DCIM folder, please, do not change the content of this)
  DCIM folder)

  * 2. Firmware Update (Please make sure of course he didn't is no battery inside the unit and the power adapter is not connected to the camera) *.
  -Open the Panel first
  -Insert the SD card which has the F/W files
  -Insert the battery (make sure that the battery is full), then plug the power adapter to the camera.
  -Press the shutter button when the message press shutter to update to start the update process. During the F/W update of the LED will keep flashing. Do not remove the battery or disconnect the AC adapter during this operation, otherwise the camera will be damaged.

  * 3. Update has been completed *.
  -The LED will stop flashing once the firmware update completed (Please make sure that the flashing stop light)
  -Restart the unit remove before adapter, the battery and the SD card in camera in order to avoid the firmware update again.
  -Upgrade of the F/W was over.

  Please follow these steps and let me know if everything is Ok now.

  Good luck!

• Camileo H20: How to save white balance settings

  Hello

  Just got this camcorder and find my way round with him.

  My question is when you replace the night mode settings and the balance of whites etc, when you close the screen and open it again to continue shooting, mode returned to the automobile and so has white balance settings.

  The other settings would you like the way I did it is to say HD or 720 etc is this right.

  Also use indoors under 60w lamps is non-existent.

  Thank you

  Hello zackwolf,

  Yes you are right. A few changes like the white balance and so on go to settings by default automatically, if you close the screen.

  OK - the other settings would you like the way that put you it is to say HD or 720, etc..

  Maybe a new firmware would solve that problem, but I know there is no update of the firmware available for the moment.

  Best regards

• PMW F5. Problems of the white balance on the configuration of the memory.

  When I dial in a white balance in memory as 6300K to shoot outside, looks Pink for me. Anyone else having the same problem?

  Yes, I thought the same thing on a F55 ended so predefined shooting. Bit starnge?

• Set white balance

  Please tell us how to change the the White Balance on my HP 2311 x two monitors.  Must be in the Panel configuration (display?) or color management).  Use of DataColor Spyder 4 to calibrate two monitors for Photoshop 5

  Hello

  You probably already found the settings of brightness, color and contrast in the menu of the monitor.

  HP has this utility model adjustment that might be useful.

  Windows 7 has a calibration depending on the view. Press F1 and type of calibrate.

  Perhaps your best option for calibration is to use the Control Panel's video management function to refine the monitor color contrast, brightness, gamma, hue and digital vibrance.

  HP 2311 x is not a professional quality monitor.  You can or cannot get your results using 4 Spyder.

  A professional ISF Certified will be the best calibration equipment and know how to get into the hidden service menus, if this access is available.