White black type on officejet 8600 display

Similar Questions

• HP OfficeJet 8600: Print using black ink only

  We use our printer as a copier only.  It is not connected to a computer.  Why do the color cartridges run out of ink and we cannot print black print.  We print any documents using color.  Is it possible to turn on the black only?

  Sorry, but the HP Officejet Pro 8600 has separated from the inks and printheads and requires that all inks are available to avoid damage to the print head.

  You can minimize the ink used with the following steps:

  • Use draft mode when the quality is sufficient.  Draft mode uses about half the ink or Normal or best mode.
  • Power switch of the printer only allows to turn off the printer.  If an external switch (as a protector or output impulse) is used more ink will be used at startup.

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Officejet 8040 has us an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 6700 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  If you do ever print color laser printer would probably be a better choice.  If you occasionally print color but especially black a HPI printer as those in the first category above can be a good choice.

• HP OfficeJet 8600 Premium: Scanning to the desktop

  Hello

  I use the HP OfficeJEt 8600 Premium and I would add three computers to the scan function, so when I scan a document, I can choose the computer I would like to than the scan-to-file.

  I would like to know how to configure the folder so that it scans a folder on the desktop, titled 'Scans' against the 'Document' default folder.

  Today, I spent a few hours playing with it, following the instructions on the forum and further research on google. I could program to scan to computer 1.

  I then changed the name of the computer, somewhere in the HP Scan Utility preferences... then on the touch screen of the printer performs, under scan > not scan to computer, NO computer has appeared.

  I would like if anyone can break it down for me. How can I program it to allow all 3 computers connected wirelessly, to receive scans to their individual workstations. ALL 3 are Mac.

  SECOND-

  I want to program this tray 1 can be white paper and tray 2, letterhead. Have not spent time on it yet, but would love if anyone knows.

  Thank you

  CASS

  Hi @cass321,

  I can certainly help you to scan to your computer and edit your destination folder. I understand that you do not want you can scan all 3 of your computers when you scan from the front panel of the printer. Please take a look on the following document, you can find frequently asked questions particularly useful: HP Officejet Pro 8600 Series printer - scanner to a computer, email, memory device, or network folder.

  What about using it the 2nd test paper for paper replacement types, please take a look on the following document, I suspect it will answer questions you might have: HP Officejet Pro 8600 e-all-in-one printer series (N911) - setting up the printer to print and copy of tray 1 and tray 2.

  Please let me know if you have any other questions. I'd be happy to offer further assistance, thank you.

• OfficeJet 8600 loses its Wi - Fi connection while trying to analyze

  I have an Officejet Pro (top-of-the-line) 8600 and I use this for my real estate business.  This means that I constantly analyse documents.  I bought this printer about a month ago, and I have multiple issues with the printer 'drop offline.

  The time I noticed it most is when I will execute a function "Scan to Computer" or even "Scan to Network Folder.  When this happens and I am scanning documents, sometimes it's going to happen the first document and sometimes it won't get through 2-3 documents before the BLUE wireless light disappear and then start flashing (which means that it is again acquired a wireless signal).  Therefore, I lose my fax, and I have to try it once again.  My backup plan is to scan to a USB key, but not ideal at all (I bought this printer only for wireless capabilities).

  I notice from time to time when I'm on the computer, the icon "Scan of the computer is no longer active" momentarily (which means that the printer was offline for a few seconds).

  I made a page of configuration/network test and the signal was strong (5 of 5) and there is no problems through the test.  However, whenever I try a scan, very rarely the scan be completed and go to my computer.  What can I do?  I'll have to check, but I think I'm deconflicted regarding IP addresses (but if there is a de-escalation, wouldn't it not allow me to connect on the wireless at all?).

  Has anyone else had problems with the features the Officejet 8600 series wireless?

  For the off topic answer the first question, Netgear and 2Wire, which AT & T uses normally, should be substantially the same as, that shouldn't matter.  In addition, two router radio wireless networks that together could interfere with each other.  If you have a router that AT & T has failed, you need to get a standard modem from AT & T to replace the router modem combination to avoid that from happening.

  Now on the problem of the accutall at hand.  I see two things from the information that you gave me and which could contribute to the problem.

  The first is your encryption type.  WEP is actually the type of secure encryption leaste you can use, and can cause problems in connection with the printer.  HP printers work well with the type of WPA - AES encryption.  WPA - AES is also the most secure encryption type, that you can use right now.  If you are not comfortable change, contact AT & T and they should be able to help.

  The second thing is the AVG software.  He doesn't like most of intra-network communications.  I don't know why since everything is behind the same firewall router, but don't like AVG for two devices on the same network communicate with each other constantly.  Fortunately you can tell him to stop obstructing communication by opening ports in the firewall to allow scanning through.  I will list the ports at the end of this post.

  Try these things and let me know what happens.

  HP printer ports
  UDP	TCP	Acronym	Definition	Used for
  137	137	NetBIOS	Network Basic Input/Output System - (basic communication)	UDP: Card printing, Photo Upload
  138		NetBIOS	Network Basic Input/Output System - (basic communication)	UDP: Photo card download
  	139	NetBIOS	Network Basic Input/Output System - (basic communication)	TCP: PhotoCard Upload
  161		SNMP	Simple Network Management Protocol - monitoring network devices	UDP: print
  427	427	SLP	Service Location Protocol (know what things can do on the network)

  UDP: Card printing, Photo Upload, scan, fax, Installation

  9100

  PDL

  page description language - print control language (how the printed page you want to watch)

  TCP: print

  9220

  TCP: Scanning, fax

  9500

  TCP: scanning

• OfficeJet 8600

  A 8600 connect simultaneously wired and Wi - fi? Mine says cannot connect to Wi - Fi when connected by cable.

  Thank you

  Hi T_Friedrich, sorry to hear that you are having problems with your Officejet 8600 of connection to the network.  To answer your question, you can have active wifi and also to use a USB connection. The printer has only an IP address if you are limited to one type of network connection. You can you WiFi, but you can't use either net at the same time.   Here is a document that will better help you with this problem.   http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=86228&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4323648

  Hope this helps with your problem.

  Thank you

• HP Officejet 8600: No photo printing

  My Hp officejet 8600 will display the text but no pictures.  He told me my printer does not communicate with the printer, I can print a text very well.

  How is the connected printer - USB, wired LAN or wireless? What program are you printing from?

  I suggest going into Word (you have one) and paste a picture into a document with text.  Try to print to it.  If it prints OK I suspect the settings of the printer for the program that you use to print photo is perhaps not properly configured.

  If a Word document with a photo and text does not print http://www.hp.com/go/tools diagnostics can help solve the problem.

• HP OfficeJet 8600 not return status and ink levels

  Hello

  I have a new one (from this summer) a model HP OfficeJet 8600 (N911a) AIO

  Just run out of black ink on startup of the cartridges provided all.  At purchesed an Office Jet Valuepack 951XL and 950XL in preparation.

  So I replace the Starter 950 black void for the black of 950xl, all ok thing prints, scans/copies fine

  But when I launched the web interface to check the status of the printer status and ink levels are in red and I can't get the ink gas monitor section.  Screen attached.

  If I try to launch the HP printer Assistant for model nothing happening!

  Any suggestions please?

  RGS

  Steve

  

  Hi all

  OK I solved this problem. But since then, I had cause to rebuild my main desktop PC is so BRAND new HP software has been installed and the question has not reappeared.

  Thanks for everyone for entry

  Steve

• Cannot Downgrade firmware on HP Officejet 8600 more!

  Hello

  In my office, I have to scan and copy legal size documents a lot a lot per day, I recently acquired this great printer Hp Officejet 8600 more

  The first day, I was able to scan a bunch of 2 faces paper legal, very impressive, but then I upgraded the printer, as always at ease with the updates, but as a result of this, I was unable to rescan legal-size paper

  I read a lot of similar problems, and I can't believe that there is an official decision, the printer can scan perfectly legal size papper, the solution is therefore downgrade the FW to an older version, but I can't, I tried with Jetadmin, with OJP8600_N911gn_1232A.exe and copy the file to upgrade *.ful directly to the printer

  And still the same thing:

  -in the printer display the message (print) for a few seconds and then back to the homescreen again
  In the computter with Jetadmin he stay on 0% for hours

  -With OJP8600_N911gn_1232A.exe and EnterpriseDU.ini modded pops up an error after 20 minutes and ask me to reset the printer

  -Copy the file *.ful to the printer, just put the screen printing on the printer 2 or 3 seconds and the back then to the home screen.

  I tried by USb cable, ethernet and same wireless

  Is a security bolt in the new firmwares?

  How can I downgrade the printer?, is urgent, I need to analyze a large number of legal documents
  And please activate the option of our own choice of risk, for a legal analysis in the next update, I am tired and disappointed...

  Thank you

  Hello BHVampire,

  Welcome to the HP Forums!

  I understand that you are unable to scan legal size paper after upgrading the firmware using the Officejet 8600 more. I will do my best to help you! I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• Rotation TIFF files overview reverse colors (black becomes white and white black). Is this a bug?

  Rotation TIFF files overview reverse colors (black becomes white and white black). Is this a bug?

  Of course, sounds like it.  However I don't see this behavior on a test screenshot.

  Bug Reporter https://bugreport.apple.com/

• Cannot find Scanner Actions tab HP OfficeJet 8600 more software selection

  I recently bought the HP OfficeJet 8600.  I am running Windows 7.  I try to add folder selections to the printer for analysis at the folder option, and I want to configure the scan to E-mail option.  I was able to add a folder, but now I can't find the stock selection to scan in the menu when I run the printing software.  I don't see the following selections.

  HP printer Assistant (do nothing when you press on)

  Setting preferences

  See what's printing

  Customize your printer

  I saw the selection of Actions of Scanner option once when I launched the software, but now I see that the above four choices.

  Any suggestions?

  Hello

  Uninstall the software in the Start Menu folder.

  Then download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3 & CC = US & DLC = in & LC = on & os = 4062 & Product = 4323648 & sw_lang =

  Now you should see all of the features in the new software.

  Shlomi

• Comics on Officejet 8600

  I understand that you can select what comics print in the application of comics on the Officejet 8600. How this is done? We cannot find the option to choose what comics, to turn on the app thank you in advance.

  Hi katfry90,

  I can't wait to hear that you have questions.  This can be completed by turning on printing and updating the parameters you want through your ePrintcenter or HPconnected regular account.  If you would like more information your product, click here.

  1. connect to Eprint account

  2. Select Apps

  3. Select the comic strip

  4. Select manage

  5. desired tick comics

  6 hour and days of addition check of

  7. click on continue and follow on-screen instructions

  I hope this helps!

• scanning duplex hp officejet 8600

  Hello!  I was wasting a ton of time trying to figure out how to scan duplex using HP officejet 8600.  Is there a driver or software, I need?  Now when I go to my settings of the printer in the Control Panel, it only shows my printer and fax. I don't really see an option to change the settings on my scanner.  Even if I can scan.  I want to be able to use the high plateau of the loader page to scan both sides.  (I plan on my teaching books everything on a USB for easy access and sharing.)  "This is the main purpose of me to have bought this printer.)

  Help, please!

  What model 8600 Officejet do you have?  The Officejet 8600 more and Officejet 8600 Premium have ability to scan double-sided, the Officejet 8600 standard does not.  You can check from the Panel with the copy settings - most and Premium have an option to make the copies face 2:1 or 2:2 for the original and copies, the standard version has options for 1:1 and 1:2.

  If you have the Officejet 8600 Plus or Premium, what operating system are you using?  How the connected printer - USB connected LAN or wireless LAN?

• Cannot sweep of the MAC Book Pro using OfficeJet 8600

  I have used my OfficeJet Pro 8600 to scan until last week.  So I rebooted the software of HP and I still can't analyze.  I tried the Apple via AirPrint (version 2.0) drivers, still does not work.  Prints well but will not scan.  10.10 OSX is loaded but it worked for weeks after that.  The strange thing is that analyze the Mac of my wife (an old portable) with OS x 10.10 using version 1.0 of AirPrint.  Ideas?  I tried all the resets of the queues, etc.

  Hi @Cap1007

  Welcome to the Forums of HP's Support. I understand that you are no longer able to scan using your printer Officejet 8600.

  We know that this is not a hardware problem that you are able to scan the older Mac Help. your wife I included the document Mac OS X: Scanning Software done is not open or stops responding .

  Please let me know the results.

• HP Omni 120-1050xt: screen goes to red, green, blue, white, black after upgrade to Windows 10

  When the PC is idle, the screen turns red, green, blue, white, black, and every time I need to turn off the machine. He said "best driver for your device is already installed" - Intel HD Graphics. I tried to uninstall, install.

  Greetings,

  HP not support your PC when you run Win 10.

  I suggest that use the "Go Back " process win 10 ASAP.

  If this is not possible because of your graphics problems you'll have to do a restore to factory HP.

  I can help you more with this if you wish.

  If the upgrade was forced on you there are ways to stop the involuntary update.

  Let me know if you need further assistance.

  Jay

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!