white connector pane programmatically set

Similar Questions

• Get the reference to control of the connector pane

  I'm trying to get a reference to a control associated with a specific index in the connector pane. I see that there is a method to assign control to a terminal, but not get control of a terminal-specific. I know that I can enumerate all the controls in the connector pane, but it doesn't specifically tell me where they are.

  Edit: I see, there are private methods to get and set properties that can have this info, but because they are undocumented, and they are properties of a VI that is binary, I can't bone.

  When you read the Controls property of [class ConnectorPane], he puts back them to you in the order of terminal. There is a VI in the examples folder that shows you the order for each connector component model (visually). I don't have LabVIEW in front of me at the moment, but it should be examples\Application part Scripting\Connector Control\VI, or something like that.

• Misfortunes of connector pane

  My guard re-failing itself to a connector pane layout unwanted 6446, possibly after looking at someone else's code.

  I tried to play with the LabVIEW.ini keys and I searched on the tools > Options you are looking for something related, but whenever LabVIEW is restarted, the connector pane returned to 6446.

  Am I missing something?

  A G #?

• programmatically set the display format minimum field width

  Hi all

  I am designing a user interface for a digital ASIC assessment and I wanted to programmatically set the minimum field width of a digital control that takes a binary value. Is it possible to do?

  Thank you

  Nick

  Hi Nick,

  Yes, it is possible.

• LabVIEW allways modifies the default connector pane

  Somehow my default connector pane is always reset zo 6x4x4x6 (instead of the normal 4x2x2x4). No idea how this happens.

  I can reset it by deleting the line

  defaultConPane =...

  in LabVIEW.ini (so LabVIEW is running).

  But when you restart LabVIEW (or when you open a project containing no screws?) the line is rewritten.

  Does anyone know this problem (in LabVIEW 12)?

  (The configuration ini directive is described in the following article.

  http://digital.NI.com/public.nsf/allkb/279F064F0688C114862570900057678C

  It comes to LabVIEW 8.0, but it still works in LabVIEW 12.)

  You use G # by chance?  I think remember that it changes the default connector 6446 pane.

• Subvi value not updated when it is connected to the connector pane

  I have a legacy program that computes a frequency when a value changes of sensor (falling edge essentially), and I'm trying to convert the logic to a Subvi, so I can use it for 44 other sensors. The program first used a large number of property value node, I discovered is not good for subVis. I converted them to local variables, but I still have questions.

  As soon as I connect something to the output pane that closes the update value question. If I remove the connection in the connector pane, it works fine.

  a picture of the block diagram is attached. I tried to connect Freq and frequency of output to the connector pane, as soon as I connect it to the component connector to work properly to date do not at all.

  The VI is configured as non-reentrant.

  Thank you

  
  

• Looking for a way to programmatically set the visible front part when opens a Subvi

  I'm looking for a way to programmatically set the visible portion of the front panel, when a Subvi opens.  Did not find all the messages that are related, but I do not know how to ask the right question.  To be clear, I want to write a VI assistance programme through a list of subVIs to ensure that background images are all in the same place when to open their respective subVIs.  I hate to play manually with scroll bars before I save each of the screws...  I'm thinking I need to find the top/left of the background image location (know already do) and then to set a property of the VI FP some offset or these values, but I can't find the corresponding property. FP:run - timeposition:custom looked promising, but only affects the location of the window, and not the area of the front panel displays the window.

  I should have added that the idea of using the background image does NOT change the origin.  Therefore, always be close enough, as your controls and indicators won't move, just the image.

  I personally use the OpenG VI and the open method of front panel, when I am in your situation.

• Could not load the connector pane

  Has anyone else had this error before?  I asked tech support, but they had not seen anything like that either.

  System:

  Windows 7 Professional (64-bit), LV2010 (10.0f4 v, 32 bit)

  The repro steps:

  (1) create a new VI (any method)

  (2) right-click on the icon and select 'display the connector '.

  Expected result:

  Connector pane appears

  Actual results:

  Error message - "LabVIEW: cannot load the component connector.

  

  Workaround solution:

  Click OK in the error message.  The connector pane then charge and everything works fine.

  This happens only the first time that I open the component connector on a VI; It does not happen after that I have opened (even after the backup, etc.).  Technical support had me try the f4 patch, reinstall/repair of LV2010, and I even made a compilation of mass for good measure.  It is not a real problem (I just click OK on the error and go about my business), but I'm curious to see if anyone has seen this kind of behaviour before.

  -Daniel

  So if you have an archaic line in your file LabView.ini (maybe since way back in the days 6/7/8.x and it is simply copied to after each upgrade, then copied on new computers) and it looks like this:

  defaultConPane = 4185

  

  Then you could try to load a connector component that does not exist.  It should perhaps have been 4815, or something else.  In any case, delete said line and everything is fine.

  http://digital.NI.com/public.nsf/allkb/279F064F0688C114862570900057678C

• programmatically set the bind view variable value of object that showed to the query Panel

  Hello

  I have a case in 11.1.1.7 Jdev, I deploy my application on BPM 11.1.1.7.

  I have a VO that three attributes of it was put in a viewcriteria... Let's attribute A1, A2, and A3. the view criteria is any condition "AND".

  and then I create a variable binding in the VO named b. my vo also query using this variable B.

  in the jspx, I create a query panel based on the viewcriteria. then in the A1, A2, A3 and B query pane shows.

  I can reset the Panel request programmatically using this tutorial http://www.jobinesh.com/2011/04/programmatically-resetting-and-search.html

  but unfortunately he didn't succeed for A1, A2, A3 because they are in the display criteria, but B can't reset.

  I tried to put the value programmatically using queryModel, queryDescriptor, setNamedWhereClauseParam, but this failed and it starts to makes me crazy...

  anyone here seen cases like me? and found the workaround? pls throw some light.

  Thank you

  Have you tried with VariableValueManager? http://www.jobinesh.com/2010/10/how-to-set-bind-variable-values-at.html

  Dario

• How can I save the elegant white background on the set of apps.

  I have a sony S series tablet. The set of apps was a white information with little burst above the icons. Was elegant!, now, in the last update have a horrible black background. Not all icons are very good, because it's horrible the new app tray. How do I white backt?

  Android 3.x apps tray had options to put lines and organaize apps icons, androd 4.x update this option is missing, why? Why good ideas won't anymore?

  Hello do,

  Thanks for the post.

  Options and available before the upgrade design has been the feature of the specific version of Android. After the upgadation screens, designs and new features has been added. The possibility of recovering the previous designs of Android is not available.

  Kind regards

  Tony.

• How to programmatically set the option button selected on a group of radio buttons

  Hello, I have another question for you.

  How can I set an option specifically button selected programmatically on a group of Radio buttons? I think it's very simple, but I can't find a solution.

  Thank you in advance.

  You can use the SetActiveCtrl function

  

• programmatically set the colour of the façade

  Hello

  Is there a way by which I can set the colour of the façade. I want to do it programmatically in a large number of subvi.

  Kind regards

  Pavitra

  Just in case where you struggle to find.

  

  This code gives me a dirty blue color on the front panel...

• Programmatically setting QueryDescriptor attribute values

  Hi all

  How can I set the values of the attribute in a descriptor of query programmatically? From the application descriptor, you can get a handle on a particular attribute criterion that has a getValues() but not setValues(). Is this possible?

  Also, is it possible to program a panel of query mode base on the edge of fashion and vice versa?

  I use JDeveloper 11.1.1.7

  Thank you

  Bill

  Try

  QueryDescriptor qd = queryEvent.getDescriptor ();

  AttributeCriterion test = qd.getCurrentCriterion ();

  / * Gets the key currently in the search criteria

  * You can manipulate the values here :)

  */

  String attrLabel = criterion.getAttribute () .getLabel ();

  Object attrValue = criterion.getValues () .get (0);

  To change the value, you get the list of values and set in the new list.

  Timo

• Programmatically set the itemRenderer

  Hello

  How can I programmatically itemRenderers? The reason I need it is wanting the same list to change the rendering engines based on user input.

  I tried and it did not work:

  FirstItemRenderer extends IconItemRenderer

  var itemRenderer:FirstItemRenderer = new FirstItemRenderer();
  itemRenderer.iconWidth = 40;
  itemRenderer.iconScaleMode = "letterbox";
  itemRenderer.setStyle('iconDelay',0);

  data object contains properties name, icon, and Decorator; the last 2 are embedded resources
  itemRenderer.labelField = "name";
  itemRenderer.iconField = "icon";
  itemRenderer.decorator = "decorator";
  list.itemRenderer = itemRenderer as IFactory;
  list.dataProvider = acDataProvider;

  I tried and it works, but I can't figure out how to set what I could put on like iconWidth and iconField:

  list.itemRenderer = new ClassFactory (FirstItemRenderer);
  list.labelFunction = getName;
  list.dataProvider = acDataProvider;

  
  Where getName is:

  private void getNameitem:Object): String
  {
  If (Item.alternateName) {return item.alternateName ;}
  else {return item.firstName +' ' + item.lastName ;}}
  }

  Yet once again, I need this because if the user clicks on the button 1 then FirstItemRenderer is defined as the converter for #list, whereas if the second button is clicked, then SecondItemRenderer is set.

  Thank you.

  Discover the properties of ClassFactory:

  protected function assignRenderer(event:MouseEvent):void

  {

  var newRenderer:ClassFactory = new ClassFactory (MyRenderer);

  newRenderer.properties = {height: 100, alpha: 0.5};

  List1.itemRenderer = newRenderer;

  }

• I get pop - up & white pages loaded - secure setting works very well

  I get white pages or pages that I don't ask for much. There are also tons of windows pop up and notifications that appear and who should not be there.

  After scanning your system for malware install AdblockPlus and subscribe to a list of filters.

  https://addons.Mozilla.org/en-us/Firefox/addon/Adblock-Plus/