Similar Questions

• Impossible to uninstall Google Chrome. "Close all windows and try to uninstall.

  Original title: try to uninstall google chrome it says first close all windows, but can not find open windows

  trying to unstall google chrome it says close all Windows Google canfind first everything in the open wind

  I faced this problem too, but I realized what the problem was.

  Open the Task Manager and there you can find on Google Notifications running in the background.

  Put an end (END TASK) and then try to uninstall chrome, it worked in my case.

  NOTE: apart from this, you can find a few other tasks of chrome running in background.

  Usually, they would have the Chrome icon, but sometimes, in the case of Notifications, the icon is different.

• First of all this, switch to 8.1, but the store staff MS told me that they only treat 10 windows to upgrade.

  MS staff informed me that my slow pc needs to improve and its current version is vista Home premium.  First of all this, switch to 8.1, but the store staff MS told me that they only treat 10 windows to upgrade.  So, I stuck, please help.

  The audio output device also has red X on the "speaker" icon.  Please kindly help.

  I took these lines outside where you inserted in your "reply by quoting.

  "Please, help how to check manufacturer."

  "I still don't know how to change due to learning disabilities.  Please kindly help. »

  First thing to do is to see if the 8/8.1 drivers are available:

  Check the manufacturer of your particular Web site:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

   

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

   

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

   

  ASUS:

  http://www.ASUS.com/support

   

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

• ALL WINDOWS OPEN WITH 3 IN A WHITE PAGE AND ON THE SIDE STRIP IN THE MIDDLE

  I HAVE TRIED EVERY THING TO SOLVE THIS PROBLEM, EACH WINDOW, I OPEN, IT OPENS WITH A BUNCH OF 3 INCHES OF WIDE WHITE ON EACH SIDE AND THE PAGE IM TRYING TO LOOK IN THE MIDDLE OF THE SCREEN FOR EXAMPLE WHEN I OPEN YAHOO TO CHECK MY EMAILS E HOME PAGE IS DISPLAYED IN THE CENTER OF THE SCREEN WITH A 3 INCH STRIP WIDE WHITE ON BOTH SIDES OF THE SCREEN. HOW DO IT SO THE PAGE FILLS THE SCREEN WITH ON STRIP 3 INCHES ON EACH SIDE

  Hi CWALKERALA,

  1 when was the last time it was working fine?
  2. did you of recent changes on the computer?
  3 - is only Internet Explore or all windows?

  Please provide us with more information about the issue to help you!

  If possible send us a screenshot of the issue to better understand.

  You can also see question persists in safe mode or not.

  Steps to start in safe mode
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrows to select your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Restart the computer to return to normal mode

  If the problem is that with Internet explore, you can reset the default browser settings and check.

  For more information please visit the link below.
  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737
  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• First all, Windows has disappeared!

  I am not a beginner in computer science (or first) so it's really confusing me! I went to open a project today in first CC 2015 and once the project is opened, there are no windows - nothing! No editing window, workspace, program source... etc. I can see the Premiere Pro toolbar in the bar at the top of the screen mac - all windows are supposed to be displayed, but there is nothing there. I restarted the program, the computer, unplugged my other views, changed screen resolutions, click on "Show all windows", you click "Hide the first pro" and then open it again. I can't get a single window! I also tried to look at my other mac window workspaces, tried to open different spaces of work first, tried to turn on and off individual windows. Nothing. Kind of I'm stuck here because I had to go back to 2014 CC just to continue to work on projects. Help!

  (First CC 2015 - last updated October 1, 2015)

  (Macbook Pro 2015 - Yosemite)

  I think I've solved the problem. I have re-sync my creation with the cloud parameters. When the program has re-opened, the windows were back to normal.

• Pinned tabs on all windows

  When I close the firefox window that contains a pinned tab before my other firefox windows, pinned tab does not open the next time I start firefox. (I chose "show my windows and tabs from last time"). Therefore, it would be nice if it was possible for the tabs pinned to:
  be on all windows.
  be on the active window,
  or transferred to another window when the first window is closed.

  Is this possible? This is for a future version? Thanks in advance for the answers.

  You can have different sets of tabs pinned on each open window.
  
  Better is to get used to using Firefox > quit to close Firefox and not the X close in the title bar to make sure to close all open windows at the same time.

  • Tab initializer App: https://addons.mozilla.org/firefox/addon/app-tab-initializer/

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• BLUE SCREEN OF DEATH, random restarts, pink shadow on all windows

  Windows 7-64 bit

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8009AA44E0
  BCP2: FFFFF88011E1293C
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Very well with the color normal and all Windows start. Then all my startup program loading, turn it to this http://postimg.org/image/ylmfzypz5/. Then, whenever I click on something, the discoloration worsen until everything is pink, then it restarts randomly. I try to start in safe mode, which was fine and remove and then reinstall the driver of my gpu. The same problem. I don't know if this mess with her or not, but since yesterday, I had installed 8.1 and randomly it froze, restart and then got stuck in a restart loop when the screen goes black and restart after the first screen with option. I did a clean install of windows and it's still does not resolve so I tried to install windows 7 instead. Now this problem pop up.

  No new material ore removed material, no new drivers installed, problem just pop up and I've never seen before.

  Please help, thanks

  Here's my dmp files

  https://www.mediafire.com/?1bjwjiyy46ijceu

  https://www.mediafire.com/?m0ozxx4fddr97eh

  https://www.mediafire.com/?smdgxid3tsjmmfa

  I strongly recommend that you update your system with the latest service pack available before proceeding with the following steps.

  Steps to take before installing Windows 7 SP1 and Windows Server 2008 R2 SP1 starting from Microsoft Download Center
  http://support.Microsoft.com/kb/2505743/en-us

  Learn how to install Windows 7 Service Pack 1 (SP1).
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-7-Service-Pack-1

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932).
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842

  Troubleshoot installation of Service Pack 1 (SP1) for Windows 7 or Windows Server 2008 R2.
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-installing-Service-Pack

  ===============

  Now, the details of the accident.

  The debugging session: 18:56:35.235 Sun 7 September 2014 (UTC - 04:00)

  116, error checking {fffffa8009aa44e0, fffff88011e1293c, 0, 2}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
  Probably caused by: nvlddmkm.sys (nvlddmkm + c 15393)

  SYMBOL_NAME: nvlddmkm + c 15393

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 53b4446a

  FAILURE_BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys

  BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys

  STOP 0 x 116: VIDEO_TDR_ERROR troubleshooting (also for 0 x 117 of STOP errors
  http://www.SevenForums.com/crash-lockup-debug-how/63320-stop-0x116-video_tdr_error-troubleshooting.html

  Uninstall and reinstall clean NVIDIA Display driver.

  ==================

  Make sure that the display and all the other drivers, including the BIOS are updated the most recent versions available. Start with those listed below.

  Important *.

  This could be the cause of these problems.
   
  Bugcheck 1000009F, {4, 258, fffffa8009743680, fffff80003f9a510}

  Failed to load image \SystemRoot\system32\DRIVERS\asmtxhci.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for asmtxhci.sys
  ERROR: Module load completed but symbols can be loaded for asmtxhci.sys
  Probably caused by: pci.sys

  Image path: \SystemRoot\system32\DRIVERS\asmtxhci.sys
  Image name: asmtxhci.sys
  Timestamp: Wed Dec 08 05:14:06 2010 (4CFF5A6E)
  CheckSum: 00069A 15

  Driver Description: Asmedia USB 3.0 driver.
  http://www.ASMedia.com.tw/Eng/e_products_list.php?item=83&cate_index=0

  Note: Looking for an update from the manufacturer of your motherboard (linked below) support page as your first choice.

  Identification information of the machine [of Smbios 2.7, DMIVersion 39, size = 1265]
  BiosMajorRelease = 4
  BiosMinorRelease = 6
  BiosVendor = American Megatrends Inc.
  BiosVersion = 4.6.4
  BiosReleaseDate = 12/03/2014
  SystemManufacturer = BIOSTAR group
  SystemProductName = TA970
  Family = None
  SystemVersion =
  SystemSKU = None
  BaseBoardManufacturer = BIOSTAR group
  BaseBoardProduct = TA970
  BaseBoardVersion =

  BIOSTAR Group TA970
  http://www.Biostar-USA.com/app/en-us/MB/introduction.php?S_ID=623#DL

• First of all: I install Nik Collection, which asked: LR4 has to be the host. I said yes. After this disepear LR. I couldn't open it. LR and Nik C where to uninstall. Then I downloaded the CC version. But it is said, that he can't run on my PC. I have Wind

  First of all: I install Nik Collection, which asked: LR4 has to be the host. I said yes. After this disepear LR. I couldn't open it. LR and Nik C where to uninstall. Then I downloaded the CC version. But it is said, that he can't run on my PC. I have Windows 10. What should I do?

  MVH

  Steen Kruuse (Denmark)

  [personal information deleted by Moderator]

  Hi Sassolino,

  Please refer to the below thread:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Let us know if that helps.

• Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  This looks strangely like the good old 'false monitor via Windows Update profile'. If the selector of color shows the cream when it should be white, that's all.

  We won't know until the OP comes back with more information and perhaps a screenshot, but in the meantime (since I'm away from my main system) I can try to locate my standard screenshot of one of the countless other threads I posted it that...

  ah, it's here (last posted barely two weeks in Lightroom):

  

• Why first changing the Windows 7 display settings?

  Hi all

  I am running Windows 7 on a brand new i7, two monitors and a nvidia Quadro 4000. I have most of the Windows display settings (Aero-stuff) turned off to speed up Windows performance.

  When I opened the first, first changes the windows settings - something - display. Both monitors flicker black and the Windows taskbar change color and opacity, as if someone had gone in the command menu customize and changed my look colors and display.

  The question is this - because the first is changing my display of the Windows desktop, other programs are still using the previous (correct) display settings. Causing other programs to crash whenever I try to alternate between them. It translates into me being able to run the first to him alone, which significantly slows the multitasking.

  WHY FIRST CHANGE MY SETTINGS IN WINDOWS?

  Better yet, how can I stop this? I can't find any project, General or sequence settings that give any hint.

  If I need to change the settings of Windows customization to match first is to choose himself, it's good, but I still need to know what are these parameters, so that all programs use.

  Thank you

  -Matt

  I use a full Win7 Aero desktop computer on my Quadro 4000.  I had a problem similar to yours; "Aero" turned off when Pr and then open 'Aero' turns after the release of Pr.  If you go to the NVIDIA Control Panel, under Management 3D settings, on the global settings tab, select a color deep for 3D applications and assign the disable.  Then check that Pr uses this setting by looking at the Pr entry on the program settings tab (if the Pr does not list programs you can Add this).

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• What is the command of shortcut for all windows get the information from the computer?

  What is the command of shortcut for all windows get the information from the computer?

  instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

  just a command for windows xp, vista, 7 for system looking for information....

  original title: what is the SHORTCUT COMMAND to get information from the computer system?

  Hello BlackSecret,

  The keyboard shortcut to get to the top of this information is Windows key + break Attn.
  
  
  Who does what you ask?

• There was a new threat for IE, and on May 1 2014, microsoft announced a one time fix for all windows XP systems

  There was a new threat to IE, and may 1, 2014, microsoft announced an a time difficulty for all Windows XP systems, but I can't seem to get the updates of windows to work. Anyone out there who can help me, need to pay you for this download

  Hello Barry,.

  Update IE KB2936068 updated my copy of Windows XP this morning with no problems. And no, I didn't have to pay for the download.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10?

  Original title: Dee

  I have an old Dell Inspiron 15 with Vista Home Premium and want to switch to the window of 10. Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10? Or could it be the Windows 10 Pro?

  The free offer of Windows 10 is not available for Vista.  You need to upgrade to Windows 7 SP1 or Windows 8.1.