white spots in first cs5

Similar Questions

• Small white spots on the screen (no pixels dead) of RMB

  This week, when I opened my MacBook on the screen, I saw on the white spots screen 12 ". At first, I thought maybe would it be a beat on the screen but a quick wipe down and a thorough inspection of different angles confirmed that it was something else. I closed and turned back RMB. The small bright white spots were persistent, although only perceptible in the middle of a dark background, or when the Sun is reflected on the screen.

  Everyone has the same problem or knows what is the best solution for this problem? I don't have a case at Apple yet, because I am in doubt if Apple repair this under warranty on the other I need to get in touch with my insurance company.

  

  It reminds me of all the problems with the Retina on the MacBook Pro screens (you can search "Staingate" in Google). If the MacBook is under warranty, you must make a backup of your data and take it to an Apple Store or dealer, so that you can get your MacBook repaired.

• White spots on my 6s gray rear space

  Please help me to remove this small white spots on my 6 sec back.

  Nobody here knows what they are, take it to an Apple Store

• Portege Z830 white spots - refusal of warranty

  I have a Portege Z830. For several months, I have 2 white spots on the screen. I went to the service company official for the Bulgaria - Stemo Ltd. - which examined the computer and told me that I did this white spots by myself.

  It's amazing! I leaned on the screen with a screwdriver trying to make a white spot imagined.

  Seriously, impossible user by all means to make this white spots. It is a malfunction of the display and the refusal of the Stemo to replace or repair, it is not understandable.

  I am adding photos of the screen with visible stains.

  Please help or just take in mind the reaction of the Stemo.

  URL: http://i.imgur.com/J4sOSjm.jpg
  URL: http://i.imgur.com/hYSIBaB.jpg

  Indeed, the screenshots show two points of light on the screen and it looks like display malfunction.

  Usually if the warranty is valid, hardware problems (if it's not your fault) should be fixed free of charge.

  So I hope that someone will get in touch with you to clarify this matter.

• Qosmio X 870-white spots on screen

  My Qosmio X 870 is 8 months old and have noticed white spots in the middle of the screen (more about half higher and mainly in the Center and go to the right of the screen).

  They are pretending be worse. When I go to a dark wallpaper that they stand as stained spots - more than anything else. I notice the most when I'm brighter games as tasks and it starts to get boring. I read on another page that it would be urgent foam top but not sure.

  Any ideas - would like to have an idea before I take it to be fixed.

  >... would have an idea until I get it fixed.
  I don't think it's so important. Is your laptop must be fixed so don t waste your time and contact as soon as possible the nearest Toshiba service provider.

  Laptop warranty valid so repair should be free.

  Good luck.

• White spot in left corner when Hibernation inexplicable

  Hello

  If I spend my yoga with Windows 8.1 in hibernation mode and restart it, I have on the desktop of windows (also on the execution of windows programs) a white spot on the top left corner. The place appears on the start screen and modern applications of Windows. If I have normal shutdown and restart the spot is also not visible. Does anyone know about this problem. I found similar problems via google about Windows 7 where it was a problem of AERO. But it does not work for Windows 8.1

  

  Take WinLister:
  http://www.NirSoft.NET/utils/winlister.html

  See what's inside a list corresponding to this area.
  Will probably take place (0,0) and size (4.4) or something.

• White spots on the screen

  IAM having white spots on the screen.

  It therefore appears as a white light spot when the screen has a light background. On a screen darker it disappears completely. The spot is a few millimetres in size. My system is lenovo Z50-70.

  should I have to replace the screen?

  

  as long as you don't have more than three dead pixels, lenovo warranty covers the replacement if they do not change the conditions.

• I have asked before: RE: white spot on desktop

  This is the error message.

  Line: 30

  Char: 3

  : Error loading the DLL

  Code: 0

  URL: File:///C:/Program%20Files/Dell%20Support%20Center/sscommon/common/inc/ss_shellinclude.js

  It seems to have something to do with your Dell Support Center.  What is the make and model and the product Tag of your computer?

  In the meantime, we may be able to get rid of the white spot (which is probably a hidden Dell notification).

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Look for anything that is related to Dell and when you find unxheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The white spot should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, will have to wait for the information on your computer to find the right download for trying to solve the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• white spots on the screen of the touchpad

  I just got a 32 GB touchpad. I noticed that there are some white spots on the screen. One of them near the top left of the screen is very notciable but only on a clear background as white and light gray. The special white spot appears brighter than the background (slightly bluish). It is about 2-3mm in the Center and extends the region approximately 10 mm. Also, anyone notice the same thing?

  I would not bother to repair unless the white spots get more over time. I wonder if this is a sign of failure. Thank you.

  P.S. shapes of white spots appear similar to these well-known yellow spots on ipad 2.

  OK, answered my own question. After some Internet research, I am convinced the white spots (or stains specifically) are "pressure damage. It could have happened during the Assembly process. Some have said that this kind of problem could get worse with time (as one of my LCD monitors). In any case, I discuss with CS and they will repair screen touchpad for me.

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• How can I place first CS5 CS6 initially bypassing the CC formula?

  How can I place first CS5 CS6 initially bypassing the CC formula?  I just downloaded first CS6 but need an update of the serial number to use it as I currently have CS5.  Where can I get the CS5, CS6 upgrade?  Thank you.

  Try this phone number +.

  Creative cloud now includes the features of Creative Suite Master Collection and Design Premium

• When I use magic bullet in first cs5.5 it takes time to make

  Hello

  I have Dell laptop I7 16 GB intel hd graphics 4400 and I use in first cs5.5.

  When I edit the video and use the magical effect, he takes like 8-12 minutes to return shoots of 5 seconds.

  I can't really work with that.

  I know that my graphics card is not so good, but I suppose that the memory card and the processor is enough for video editing...

  I tried also to use in edius 7.5 and the same problem.

  I saw some videos on youtube and they explain to change the setting sequence at 640 X 480 and then when I export to return to full hd, but I guess that the video quality is also change.

  I really exhausted problem...

  Thank you.

  Some plugins like Magic Bullet are a lot of resources and the configuration of your computer is not powerful enough to cope better than that.

• I can't get the first CS5 for import running under Windows 10 .mov files.  MOV files will play on Windows 10 direcstly

  I can't get the first CS5 for import running under Windows 10 .mov files.  MOV files will play on Windows 10 direcstly.  Can anyone help?  I tried quicktime player loading but it will not work with Windowws 10

  You need to find an older version of Quicktime, from Apple, to be able to install on Win10

• I first CS5.5 and I want to send sequences of Speedgrade. Is this possible?

  I am trying to color the images BMPCC grade and have not been able to find a way to link the images of first CS5.5 Speedgrade. Is this possible?

  Direct link became possible in CS6 AFAIK. Before this date, you need to first export and import images in SpeedGrade.

• Get rid of white spots on the old photo

  Hello

  What would be the best way to get rid of white spots on the attached picture?

  Thank you!

  

  Most of them can be fixed with the Checker task tool. The brush can create problems you may need to use the clone tool. If the task is small blur can also be used. Which is kind of how works the filter spot and scratch.