Who is responsible for the boot image HAVE?

Similar Questions

• Who is responsible for the background - Polska Nature photographer

  Who is responsible for the screen - POLSKA NATURA backbround photographer

  Hi Frank,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you want to know who is the responsible substantive photographer of POLSKA NATURA screen on the system.

  Certainly, I understand your concern and will try my best to help you.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. What exactly is the problem you are having on the system?

  2. Do you receive an error message? If Yes, what is the exact error message and the error code?

  3. You did changes to the computer before this problem?

  In order to have a better understanding about the issue, I suggest you to provide us with the photos screen if possible. Please see the article below.

  How to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Please provide the above information for assistance.

  We will be happy to help you.

  Thank you.

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• have toshiba LL850 want to resize image for the background but have tried most things and still does not

  I have a Toshiba L850 and try to mount an image for the background.  Have you tried the resolution of the screen to pull the lever, but still does not.  Can someone go through the steps for me please.

  Hi June,

  What version of Windows is installed on the computer?

  The articles below show you how to change the background image and set the Position of the image in the Center that it adjusts automatically on the screen.

  Items are for Windows 7 The steps are similar to Windows Vista and Windows 8. However please let me know what version of Windows is installed on the computer and I'll give you the steps for this operating system. When the computer restarts, you'd be able to see the name.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background

  I hope this helps. Get back to us if you need more help.

• Apple is responsible for the content published by the members of this community?

  Hello world!

  I was wondering if Apple is responsible for the content shared by members of this community? IM asking just out of curiosity, does not intend to prosecute anyone who

  Thanks in advance!

  Read the terms of use that you agreed to when registering.

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Select all images, ensuring that you are in the develop module. Auto-Sync lights up and then just delete the graduated filter. You will need to activate the graduated filter tool and click on the PIN for the filter you have defined and then press the delete key. Then, you want to disable automatic synchronization. Now, just highlight the image you want to add the graduated filter and do your thing with her.

• Rule of CSS style for the background image

  I'm doing a tutorial "Create your first website" and set up a CSS rule to add a background image.  The rule indicates in the CSS styles, but it does not appear in Design view.  I re-read the instructions 100 times.  Any ideas what I am doing wrong?

  Here's my DSS rule for the main image:

  #main image {}

  background-image: url (.. / images/main.jpg);

  background-repeat: no-repeat;

  position: relative;

  height: 376px;

  Width: 968px;

  }

  Thank you!  This is a duh moment where you finally see what is obvious.  I should have taken him.

  I appreciate your help

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• How do I set the background image for the menu I have the DSP in Muse

  I design a layout and I want to bring converted of the PS to dream. Anyone know how I can do this.

  I am trying set high and the low image of the menu in muse.

  I would like to know how I can do better.

  Thank you

  Kristina

  Hi Kristina,

  You can disable the image that you have pasted above and also to create a toggled State for all menu items. In fact, there are 4 States: Normal, rollover, mouse and mouse down, but you will use usually two images because some States share the same image. Next, you need to use the menu widget and provide your cutting of images for all States in this widget. Check this link http://www.adobekb.com/building_your_first_website_pt4.html to this section all about:

  

  See you soon,.

  Mario

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• When I start a new program, I receive program is not responsible for the messages and it just stops. I am running windows 7 on an IMAC

  I use an IMAC with an Intel I-5. I installed Windows 7 and not OS - X. Had to install drivers for the mac hardware that works with Windows 7.

  Computer seems to work very well. However, sometimes when I start a new program I get the message "the {Progroam name} is not responding" then I have plenty of wait, continue, or stop smoking. When I select Exit the message says "Windows is looking for a solution to the problem" is at - it something missing on my PC that creates this freezup?

  Isn't a normal Windows behavior?

  I asked the moderators for this move to the space of discussion of Boot Camp.

• Who is responsible under the law of the consumer?

  AM currently in the 2nd year of contract through Virgin for an iphone6 more. After the display update was compromised with gray lines that appear periodically and become unresponsive. reboot would temporarily solve the problem, have tried all the other Inc. factory etc. It took to the Genius Bar at Apple who took apart and says that the phone is in good condition, no signs of misuse or damage it. They said that for them to replace it, as one does not buy the phone at home, it would cost £229, but through consumer law, could cost us nothing, but it must be by point of sale, i.e. Virgin. Now next to the phone to Virgin, first phone call went well, saying: it could be repaired by the consumer's right and they fix it but suggested another fix. Fix did not work and we telephoned again only to be told that as he was out of the year, had nothing to do with them and to Virgin arrange repair through Apple would cost US £260. A Manager promised to call me back Monday. The question, because this issue isn't our fault, will the way consumer right, who is in charge, Apple or Virgin as both say it's the other?

  Thank you very much

  Have you already checked the version of guarantee for the United Kingdom on this issue?

  https://www.Apple.com/legal/warranty/products/UK-Ireland-universal-warranty.html

  Apple has a one-year - limited warranty, after this period of warranty they offer allows you to replace the phone if you are willing to pay for service 'Off-guarantee', which is a reduced price for a new device.

  Model	Screen repair	Farm service	Maximum fees out of warranty
  iPhone 6 sec more	£ 126,44	£ 66,44	£ 256,44
  iPhone 6 Plus	£106,44	£ 66,44	£ 256,44
  iPhone 6 s	£106,44	£ 66,44	£ 236,44

  copied from the pricing of the Service - Apple support iPhone

• Who is responsible for this file S-1-5-21, bak. How can I remove it entails?

  I have a file C:\$Recycle Bin S-1-5-21-1036034521, as well as 3 other series of numbers or letters, I understand that there is a bak. file. I want to know how to remove/place restriction, do something to prevent this file in my system. This file contains a virus/malware/spyware/hacker, I don't know exactly what. This file has caused me to destroy two windfows CD (XP/Vista) operating systems. I have 8 hard drive I can't use, because whoever it is, has made this possible. I also have three mothers who are inoperationable because of this file. My system has so many back doors, it's unreal. IAt, once I have hadf (Microsoft) help me to try to get rid of what I had. This file name has requested special connections in my system. This file, at the same time, place themselves in the properties, in an area of heavy, in giving himself, special previlages. I even went as far as the evolution of operating systems. I was using Ubuntu, until I realized, that was someone else on my system, not to mention I... This file is the use of systems as a means of entry volume, it also has the system volume jump to Windows XP SP 3, he jumped into other applications. IE Ccleaner, it's how I know. C Cleaner is on 4.39 kbs, when I check the size of the file c cleaners, he says now its 4 439 MB. You can indicate what sound files are been, because the file sizes have changed. Finally, I have three towers of substitute, to replace those that are damaged tyemporarily. I would like to place one in operation. But until I can figure out what to do about this file, I am skeptical. My system has been down for almost six months. My question is why this issue requires special log ons? Are you the microsft this? If it's you, what I've done wrong.  Once I get my system running again, if I need help, can someone help me if I find this file again. I'm not the only one who has this problem with someone trying to use the special connection and the same file name. It started about six months ago. I've been a problems, real player was suspended, then other programs started hanging. So I have sent e microsoft for assistance, which I thought was microsoft. Was real someone else. I have authorized him to my computer, it then my, life has been (). You know the word I want to use. Help, please!

  Hello

  1. When do you have the problem started? Have you added or deleted programs?

  2 have you tried to do a system restore to an earlier point of time?

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  I also suggest you to check the properties of the file.

• How to add the Boot Image (x 64) & Boot Image (x 86) in the deployment of the operating system in SCCM?

  A few reasons that I deleted these 2 options OSD a few days back, but when I tried to recreate these images make me some error messages.

  Error: Package information

  Name: Boot image (x 64)

  Version: 6.0.6001.18000

  Error: errors

  You cannot import these boot images. Only final boot images are supported. For more information, press F1.

  This question is a bit Advanced for response Forums.  I suggest you try the Microsoft Technet Forums (if it is more applicable to your situation):http://social.technet.microsoft.com/Forums/en-us/categories.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.