who to get places in device 8520.

Similar Questions

• How can I get all my devices on the same page?

  I have 2 computers, a 6plus of iPhone and iPad old.

  They are all linked to the same account. The office often does not get used, but the laptop, phone and iPad get used every day.

  My favorite feature is the ability to scroll in iBooks. So, I try to use it for all my books, PDF files, etc.. But for the life of me I can not all sync them upward.

  The shelves are different, recent books are different, the pages they open up to are different. It starts to become very frustrating. I have sync collection and bookmarks on all my devices. So what can I do?

  If you run 9.3, things can be out of sync because it seems to be a problem (or questions) with 9.3 and 9.3.1 and iBooks iOS. Sync does not work for many people.

  But if you are using older versions, so I would say that, while the pages they open to should be the same, and the rays should be the same, the list of recent books (all books) syncs between devices. I think it shows just what is recently accessed on the device (I think). In addition, the books on the shelves will differ if one of the books was added manually - all manually added ePub should be added by hand for each device; EPUB synchronize between devices, if they are not the iBookstore. And shelves sort in order from one device to another, even if they have the same books on them (unless you are sorting by titles, authors or maybe categories - I think that those who would get the relatives).

  That's based on my own inveterate iBooks for recent years. Bookmarks, notes, highlights, the location of the page - those should all sync without problem, but (except in 9.3.x, at the moment).

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• BBM how to get the old device PIN

  Hi, I just get new android devices, but when I connect my PIN Changed to BBM for Android with the same BBID, and it hurts, all media to retrieve my PIN?

  Change of PIN code for each hardware device, cannot you re - use the PIN of the old appliance.

• In the 8530 Simulator, everything works fine, but not installable in Simulator 8520 or physical devices 8520

  Hey guys,.

  I wrote my application and everything worked very well in the Simulator. Then I got to know that the 8520 does not support GPS and I developed all the time to the 8530 because I thought the people here have the 8530, but they are not, but I think that this is not a problem because of the located to get the location of the cell site towers using.

  I checked all my imports if they are compatible with the 4.6.1 OS version and they are.

  http://pastebin.com/3rDjTvgH

  later, I checked if I comment on this two classes I can install the application on the device and also in the Simulator

  If I only comment on one of the two i cannot install

  If I use this code ( http://www.blackberrybase.net/index.php?page=Thread&threadID=4414 [post number 7]) I can install the application... I get a lot of mistakes, but I can install it and it does basically the same as my location class... who told me that the implementation of a location in the 8520 cannot not be the problem

  Why can not install the application on the Simulator, nor in a physical device when I implement this two classes (only in the 8520 with the 8530 everything worked well)

  I searched a lot to find the log files or something that tells me a bit whats wrong, but I've not found anything

  Thanks for the help! :

  I don't know how to close a topic if its possible, but I found a solution.

  I use JRE 4.6.1 instead of use the JRE 6.0 for the case that everyone will have the same problem in only once.

  Here's how to install an old JRE in eclipse:

  http://us.BlackBerry.com/developers/javaappdev/javaupdate.jsp

  welcome them

• How to get Windows Mobile Device Center to launch a mobile device is connected to the computer?

  Does anyone know how get REALLY WMDC to launch (actually not supposed to) - when a mobile device (MC9090) is connected to the system?

  (Or maybe suggest a request for REPLACEMENT for WMDC - preferably one who "works" with a little more frequency)?

  So far, I tried (many times):

  • Uninstall/reinstall of Windows Mobile Device Center
  • Uninstalling Windows Mobile remote adapter (when checked ENABLE ADVANCE NETWORK FUNCTIONALITY)
  • Uninstall the USB Sync symbol (when ENABLE ADVANCE NETWORK FUNCTIONALITY not verified)
  • Reinstalling WINDOWS 7
  • Using different USB ports
  • Disconnection/connection of device (MC9090)
  • The device and different cradle

  I'm running WINDOWS 7 ULTIMATE x 64.  At some point, the WMDC auto-lancé when the device has been connected - until a few days ago.  Since that time - nothing!

  I lost a couple of weeks on this issue, and this delayed my mobile application development!

  You can reach me at the: * e-mail address is removed from the privacy *.

  Original title: Windows Mobile Device Center

  Hi Robert,.

  We appreciate your efforts on this issue. Windows Mobile Device Center offers data and synchronization between a Windows Mobile-based device and a computer.

  Have you tried the possible troubleshooting steps on this issue, I suggest you contact the manufacturer of the device for assistance.

  http://portal.motorolasolutions.com/apps/us-en/support

  To request replacement of WMDC, use your favorite search engine.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful.

• Portege R400 - how to get the fingerprint device to HDD unlock

  Portege R400 model PPR40E-00901LEN

  I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

  The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

  Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

  My questions are

  (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

  (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

  (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

  Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

  Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

  Thanks to hope
  River ~ ~

  Post edited by: river14april

  Post edited by: river14april: typos and clarity

  null

  Hello

  All I know is that the fingerprint for Win 7 software is created by UPEK company.
  http://www.UPEK.com/support/customersupport/psql.asp

• T620: Get a new device registry

  Hello

  I do not understand how the registry by default '_Get' task works. I want to get the full tree of the registry to a T620 in order to edit and add one or two registry values.

  If I open _Get registry, I thought that I just had to click 'OK' and that the HPDM went to 'download' the complete record of a customer T620. But it does not work. The only thing I see is:

  My computer

  |--> HKEY_CLASSES_ROOT

  |--> HKEY_CURRENT_USER

  |-> HKEY_LOCAL_MACHINE

  |--> HKEY_USERS

  |--> HKEY_CURRENT_CONFIG

  But there is no visible subdirs or registry key to adapt.

  Who can help me?

  Thank you!

  'Get all the registry entries' only works on Linux platform, such as ThinPro4, 5.

  For windows, because the registry key is too complicated. We need you to specify an exact entry to us. For example: Add the 'MATERIAL' under HKE_LOCAL_MACHINE folder will get the whole key of in "hardware".

• Get NI Daq device using C++ name

  Hi, I'm having some problems by using nisysconfig to programaticaly API to retrieve the name of the device of data acquisition. What I mean is the following:

  When you open MAX and get the list of devices, they will have names such as 'Dev1', "Dev2", etc. I'm trying to retrieve this same information in C++. I use NISysCfgGetResourceProperty but I can't seem to get this property to return. I was able to retrieve the serial number, the name of the product, etc, but not this device name. Any ideas?

  Here is a snippet of my code:

  NISysCfgSessionHandle sessionHandle;
  NISysCfgInitializeSession("localhost", NULL, NULL, (NISysCfgLocale)0, (NISysCfgBool)false, 100000, NULL, &sessionHandle);
  std::cout << "Initialized session" << std::endl;
  NISysCfgEnumResourceHandle resourceEnumHandle;
  NISysCfgFindHardware(sessionHandle, NISysCfgFilterModeMatchValuesAny, NULL, NULL, &resourceEnumHandle);
  std::cout << "Find hardware" << std::endl;
  NISysCfgResourceHandle resourceHandle;
  
  char productName[NISYSCFG_SIMPLE_STRING_LENGTH];
  NISysCfgGetResourceProperty(resourceHandle, NISysCfgResourcePropertyProductName, &productName);
  

  You want the "Alias" not the name of the product

• How to get the USB device in the list in the resource name field VISA VISA Open VI

  I followed the tutorial below to connect with my camera using the USB port. But I don't have the name of the USB port able & Automation Explorer list devices. How to get it? Can anyone suggest something?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Hi kimhyun,

  I tried this. But managed. I used the USB as my sugesstion to device.my USB is that you unplug your device at any point of your work. Check that the device is properly connected. IF your system has recognized your device, you can view the device in Control Panel > Device Manager > then open your particular device from the list of the connected device then details > description of the system > hardware ID > then you can find here the code from your provider.

  Try this. I think that your device is connected to loosen. What USB device you are using? Also, you must install THE DRIVER FOR YOUR USB DEVICE.

  Good luck

• Is "PXE - MOF: PXE ROM. exit" then below I don't get, "No Bootable Device - Insert Boot Disk and press any key any" why?

  I bought the lifetime windows, defender security system, I also downloaded the windows repair and ran it, I even cleaned my c drive and defragmented, but I always get the same black screen. This is what it looks like.

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  /} In this area here, I slash turns clockwise

  Does anyone know how planned it and most importantly, how to prevent?

  Try to change your startup settings for...

  1 CD-ROM
  2 USB
  3. HARD DRIVE
  4. (if available) floppy drive
  5 LAN.
  You can change it by pressing the button shown next to "Boot Order"

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• my laptop can not get the boot device

  When I turn on my old laptop, it goes to bios and saying: no boot device available strike f1 to not to retry boot, f2 configuration utility, no other options. all get any idea for this problem thx allllllllllllllllll

  Hi isaaq,.

  It may be a loose cable connection or the drive may have failed.

  Since it is a laptop, the support option are limited.

  Depending on the age of the PC, you can contact the manufacturer to see if there is a diagnostic program.

  According to the OEM, your recovery disc can have a method of repair installation if it is not hardware fault.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• print module cannot get the printer device context

  I can't get my printer to work. It seems that the computer does not recognize the printer when I plug. No printer symbol. then, when I try to print a square stands up and says 'printing module cannot get printer device context' I have no idea what this means or what to do about this please help

  You need to get the print vendor drivers.   You can try using a printer driver that converts data of the PDL even that interprets your device, but you should request this information from the company that made the device

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• How to get a physical device to test.

  How can I get a physical BlackBerry device to test?  Can I just buy any Torch 9800? It will launch applications without a service plan; or I have to buy the unit from a specific source to run without a service plan?   Can I use WiFi on a device without a service plan?

  Thank you

  Zack

  You don't need a service plan to install or run an application or to use the WiFi.  You do I need a service plan to use any service of BlackBerry (BlackBerry Messenger, e-mail, etc...).