Why a SODIMM and a DIMM slot on my Pavilion g6?

Similar Questions

• HP Envy 15 1060ea Bios shows only 3 DIMM Slots.

  Hello

  I am trying to upgrade my 1060ea HP Envy (UK model) RAM.

  The laptop has 4 GB of RAM installed at present.

  I bought this laptop as a replacement of the workstation for graphics applications.

  I was hooked by the laptop with the understanding that "I could upgrade to 16 GB of RAM because there are 4 DIMM slots".

  My number of portable product = VJ295EA #ABU. Card mother = 7009 36.35. System BIOS = f.2bs.

  There are 4 Slots DIMM physical on the machine, two internal, two external.

  The two DIMM slots internal should remove the back of my laptop, which I am not willing to do.

  The two external DIMM slots are accessible by removing the laptop battery and remove the 3 screws and a small sign.

  I bought a 4GB SODIMM DDR3PC1060 module so far.

  Module Spec = 4096 MB DDR3 PC3-10700 (677 MHz).

  I don't see what follows.

  (1) if I insert the module SODIMM 4 GB in the external DIMM location nearest battery laptop, all works well.

  I start the laptop and the BIOS recognizes the additional 4 GB memory and Windows 7 64 bit also recognizes additional memory of 4G. I see subsequently notified to the system memory.

  Memory 8 GB system

  1 SODIMM 4 GB 1333 MHz

  Locations 2 2GB SODIMM 1333 MHz Micron

  3 2GB SODIMM 1333 MHz Micron.

  (2) the module SODIMM 4 GB is not recognized by the BIOS or Windows 7, when I insert the plug-in 4 GB SODIMM in slot DIMM closest to the body of the laptop.

  (DIMM location is under the location DIMM referred to in (1) above).

  (3) I decided to look at 3rd parties providing modules SODIMMmemory Dee if they had software to detect the number of DIMM slots on my machine. I looked at the following link. (http://www.crucial.com) and downloaded a tool to detect the number of DIMM slots on the machine.

  Here are the results:

  Type of memory: DDR3 PC3-8500, DDR3 PC3-10600, DDR3 (non - ECC)memory Maximum: 16GB Slots: 4

  Each slot of memory can hold DDR3 PC3-8500, DDR3 PC3-10600, with a maximum of 4 GB per slot.* * should not exceed manufacturer supported memory

  Based on the foregoing, there are 4 slots. I can see two physical external DIMMS.

  I'm confused. Here are my questions.

  (1) the amount of memory I would be able to install on this HP Envy 1060eanotebook?

  (2) why the BIOS reports only 3 DIMM slots?

  (3) it's the broken BIOS?

  (4) what I need to upgrade the BIOS?

  Thank you

  colesdav.

  .

  Spoiler (Highlight to read)

  Hello

  I bought another stick of memory of 4 GB, the same specification as described in my initial post.

  If I insert only one stick in the external memory expansion slot nearest the body of the laptop module is not recognized by the BIOS.  -J' have still 4 GB of total Ram.

  If I insert only one of these sticks in the other external location, it is recognized. I have 8 GB of total Ram.

  If I insert both of these sticks of 4 GB memory in external memory module expansion ports, both are recognized by the BIOS I have 12 GB of total RAM.

  Strange behavior, but that's what I see.

  In any case, I took the chance, bought two sticks, open the laptop & replaced the two sticks of 2 GB internal memory with the new 4 GB 4 GB sticks of memory.

  I now have a 1060ea HP Envy with 16 GB of Ram seen by the BIOS, Windows7 and Linux and 2 spare 2 GB sticks.

  Thanks for your response anyway.

  Problem solved.

  BR

  colesdav.

• DIMM slot problem

  Hey all,.

  I have a Lenovo x 201 tablet. Recently, the computer wouldn't start and understood that one of the two DIMM slots is bad (I passed the autour ram and found he could start and run if the wrong location DIMM 1 was unoccupied).

  In addition to becoming a brand new motherboard, what are my options here for repair?

  Thank you all

  Thus, the two sticks are good? (either will work and make diagnoses at location 0)? If so, the choice is get a new motherboard or pull with 1 location. You can use a single 4GB or 8GB DIMM if it's enough

• vSphere Client 4.0 free - a way to find which dimm slots are filled?

  Is it possible by the client or host (via SSH) to determine which DIMM slots is filled and with what sticks?

  Try to use

  ~ # smbiosDump > out.txt

  and investigate resulting file out.txt

• Right now, Firefox works on Sony Ericsson Xperia X 10, but not on the Xperia X 10 mini. Why is this and it will be fixed?

  I have Sony Ericsson Xperia X 10 mini and WOULD like Firefox Mobile on it. However, for now, Firefox is only compatible with the Xperia X 10. Why is this and it will be fixed?

  This is due to the processor that uses the X 10 mini. Mobile Firefox requires a processor that supports the ARMv7 architecture, but the processor in the X 10 mini supports ARMv6 architecture.

  For some time Mozilla developed a version which worked on processors who use ARMv6, but currently stopped because there were bugs that caused his accident ever. Mozilla peut start developing for ARMv6 processors once again, but right now they are not actively working on it.

• Why some games and other programs need to be "run as Administrator" mode in 7RC which worked fine in normal mode on 7 beta and vista?

  Why some games and other programs must be run in Admin mode in 7RC which worked fine in normal mode on 7 beta and vista?

  An example of this is the game Guild Wars (www.guildwars.com). I had problems with this with random programs.

  cbello57,
  Run as administrator may be required for some games and programs because they have a permission structure different in Vista in Windows 7 (Windows 7 and Vista are different in how to manage certain permissions).

  I suggest test you installation of the game in the program by clicking on the Setup file by clicking on "Run as administrator".

  This will sometimes solve this kind of situation because it installed the program in a State of high permission.

  This output from test and let us know your results Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the date and time is wrong when I start my computer

  Why the date and time is wrong when I start my computer

  CMOS battery die/of - usually about the size of a quarter on the motherboard of your system.

  It keeps things when you are not using the computer - if it starts to die/dies - then the time is no longer maintained.  Replacing, it is no different (in most cases) that replace the batteries of your TV remote or FOB car key.

• Why my calendar and time changes each time I have logoff my computer

  Original title: Date/time

  Why my calendar and time changes each time I have logoff my computer? Sometimes, it will change a year totally false and an incorrect time?

  It could be the button for the CMOS battery.

  A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.

  It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.

  Generally, the battery is a watch battery "CR2032", about the size of a nickel.

• Why my files and folders on the desktop goes away when I stop or disconnect my computer?

  Why my files and folders on the desktop goes away when I stop or disconnect my computer?

  When I start my computer its message of shows like temporary file is retained and watch the preparing your desktop... can anyone find the answer?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this: http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Why changing Date and time?

  Hello
  Initially, I had a problem where one of my hotmail email accounts wouldn't sync and it came to light that my date and time were wrong. I don't understand why my time and date have been late and not the correct time and date. Is it possible that I can know why it happened or repair. The time and date are ok now.
  Thank you

  Check the settings of Date and time, language, and region of the Panel. It could be that the utility of time Internet is "correct" values.

• Why so slow and fat out put for only the clip size small 1 sec?

  Why so slow and fat out put for only the clip size small 1 sec?

  Hello

  I just apply simple ray tracing 3d in AE and then try to make it by media encoder

  Meia encoder says 4 hours so he could make

  my clip was 15 sec not hd (I do not change all of the settings in media encoder to make)

  then I cut it to 1 sec encoder media took 20 minutes to make

  out put

  4.12 MB

  .avi file

  1 sec

  Why what is happening

  This only happens when I apply ray trace 3d not for others

  Thank you

  As they say - "a picture is worth a thousand words" thus:

  This is a screenshot of the small video clip (full HD) with curvature layer with RayTracing (see render estimated times):

  

  And the same video clip with 3D classic (without RayTracing) and effect of Warp Mesh (rendering was so fast that he even showed no estimated time - but you can see the final rendering time):

  

  So you almost 1, 5 h with RayTracing vs 11 dry without.

• Why use push and pop where addChild and removeChild can do the same work?

  Why use push and pop where addChild and removeChild can do the same work?

  What is the advantage of the push and pop on addChild and removeChild?

  It depends on what you're trying to accomplish. If you explain more about under what circumstances you would use them, a more definitive answer can be provided.    Push and pop of the work for arrays.  addChild and removeChild work for displayObjects.

• I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  Yes, Photoshop should work fine without the internet connection, as this is the standalone version.

• When I am in fact and I play my video is going really slow why is this and how to fix that?

  When I am in fact and I play my video is going really slow why is this and how to fix that?

  You've probably used uncompressed default rendering parameters.

  FAQ: What is the best format for rendering and exporting from After Effects?

  FAQ: Why my huge output file, and why didn't he play back smoothly in a media player?

• When you try to edit my Adobe document, a window appears which says that I have to use Adobe LiveCycle Designer to change.  Why is this and can it be corrected?

  When you try to edit my Adobe document, a window appears which says that I have to use Adobe LiveCycle Designer to change.  Why is this and can it be corrected?

  It used to be delivered for free with Acrobat Pro, but amy either. You have now

  you have to buy separately.