Why couldn't log on to the 192.168.11.1

Similar Questions

• E2500: 'the connection to the 192.168.1.1 was interrupted." When you access the configuration page.

  Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted."  I'm wired into the router.  Any idea of what is the cause?

  Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom.  Thanks for the tip-off that the reset method should have worked.

• Why the WAN ip displayed on my local server like the 192.168.1.1?

  I got Minecraft Server on my PC

  I have RV180W
  Minecraft server using port 25565 to connect players.
  I transferred the port 25565 my public Static WAN IP to 192.168.1.100
  When the connected Playes - server say is me. as any player to internet connected to my router (192.168.1.1)
  I can not ban players to their intellectual property. I can not set up only 1 entry of 1 IP

  The old Chinese TP-Link I don't have this problem, but tp-link is lagging players and disconecting. Now I want to find a way to repair, or sell my RV180W and but NORMAL router.
  Please, help me wth it. Dark days comes to my wonderfull Minecaft server.

  Hello Bogdan,

  I think you are describing the same question in this post: https://supportforums.cisco.com/message/3884520#3884520

  As you can see the end of discussion, we still do not have an official communiqué, which solve this problem. You can call the Cisco SB helpdesk and open a Service request. I can't confirm if there is already a beta version which fix, but at least you will be informed when it's done.

• Not able to get the 192.168.1.1 console configuration in Bridge Mode only

  Hello

  I use the Linksys WAG200G wireless modem and connection mode is ' Bridge Mode Only ', in this mode I do not get the console configuration 192.168.1.1 and Wifi set-up. Please help me to solve these problems. Appreciate your help. Thank you.

  1. you set a static IP address, for example 192.168.1.2 mask 255.255.255.0 on the computer and he wire the WAG to get access.

  2. do not allow the wireless and basically anything else on the WAG during a bridge mode. In bridge mode, it works like a standard modem and all you can change is the modem related settings.

• As of today, why can't log on to the New York Times with Firefox, but can do with Internet Explorer?

  I called the New York Times, and they said that they had several people with the same complaint. I did not have this problem before today. Normally, I recognized when I go on the site and do not have to connect at all. Today, I was not recognized and when I tried to connect, it says that there is an unspecified error and wouldn't let me open a session.

  See also http://blog.mozilla.org/security/2012/11/01/preloading-hsts/

• Need help logging on to 192.168.1.1

  Hello
  you try to reset my password for security - and the same problem as listed - tried using admin admin and password password to [url =http://www.192168-11.pw] http://192.168.1.1 [/ url], but seem to have myself locked out.
  What should I do to unlock it?

  webdangol223

  This IP address is one of the two IP addresses as router manufacturers assign systematically to their equipment.  This IP address indicates that the router is running on the 192.168.1 subnet and is the first device on that subnet.

  To speak with this router properly, you must have your PC value to assign IP addresses automatically - through the DHCP settings on the router or assigned manually your PC to 192.168.1.2.

  When you connect to a router, especially newer ones, it will ask you a login and a password.

  We are NOT able to provide to those who, as they are assigned by the manufacturer.  In some cases, this information is included in a booklet that came with the router.  In other cases, it is the printer on a sticker located on the router.

• I have problems with my 7510 holding a wireless ip address 192.168 etc. He said 169. etc.

  My HP Photosmart all-in-one (which is only a few months old) stopped communicating with my router Netgear DGN1000 Adsl a few days before Christmas.

  Instead of the 192.168.0.9 ip address that he used before I turned off the router, ITI is back with an address of 169.254.249.128; 'Source setup' = 'Auto ip "; a subnet mask of 255.255.0.0; and default gateway 0.0.0.0. I know that they are bad, so I tried a fixed ip address to 192.168.0.201, a SM 255.255.255.0; and a DG 192.168.0.1; It was OK, but the next day, returned to the auto ip settings.

  I finally managed to contact HP and the guy spent 75 minutes with me trying to restore things and finally the village that the Netgear router did not have access to the printer via certain ports (which he sent me a list of) and something he said that I had to tell my ISP (Virgin media) "FLOOD DETECTION SET to OFF" & "SP1 FIREWALL SET TO OFF.

  Communicating with VM, they were insistent that their router was not at fault - they could open ports 12 or so, at a cost to me of 60 pounds! (I refused this)

  HP told me how to set up for printing Ad Hoc (bypassing the router), who had worked during our tests.

  VM has been in my settings for the router, via a remote access device and verified a few settings, but the only one, I saw them alter was CH10 CH11 to change.

  I could certainly not the printer to accept the 192.168.1.201 after that anyway.

  As a result, I have reset the network default printers and reconfigure wireless settings. He seemed OK and running on 192.168.0.9

  I have now reset IP address in the manual on the printer, by entering the 192.168.0.9 and 255.255.255.0; and 192.168.0.1;

  Touch wood he delayed for a few days, but I havn't turned off anything (but during the night before it went wrong!)

  I'm not convinced I have a solution here and would welcome any suggestions as to what I can still do it.

  Maybe I already have some, as I "completely uninstalled and reinstalled the software HP7510 on my desktop PC.

  Incidentally, the printer is set up on 3 PCs in the House - a desktop computer under W7 HP 64 bit, a laptop (same model with BONES) and a laptop under W7 HP, but 32-bit computer.

  All were unable to print when I had problems.

  I would appreciate any suggestions for a fix permanat more. (I would have rather found a final breakdown) I have all other routers, I could try, or I could open ports, but my question is - if I had need of these open ports and other settings (detection of flooding etc.) why the work of the printer for the first few weeks I had it implemented, and why turn off the router caused these issues? (Assume that I need in the future - to turn off the router happens)

  Thank you

  Dave

  Hi Dave,.
  
  Great post with good information.
  
  As you mentioned, the printer came back with a style 169.xxx.xxx.xxx IP address. This is normally produced when the device is not able to get a full connection with the router, router it gives an internal IP address.
  
  Normal suggestion when a printer continues to maintain a connection is to assign a static IP address. This is done by using the manual IP functionality, you've talked about using. This locks the device to the network settings, and even when the network is restarted the information is preserved. This should be the solution to the issue.
  
  I hope this helps.

• Must define EA3500 as second return with IP 192.168.0.2

  Hi, need help :-)

  I have a router from ISP connection defined as DHCP server: 192.168.0.1

  I have a few devices connected to this router as 192.168.0.10 and much more...

  I had a Linksys WRT54GL connected to this router as 192.168.0.2, defined as a router (no bridge) and where other devices are connected.

  I am trying to replace my WRT54GL by a new EA3500.

  I used Cisco connect and the EA3500 successfully, but as 192.168.1.1 installation software.

  When I try to set the IP address as 192.168.0.2 on the base/Setup settings tab, disable the dhcp server, with or without disable NAT in Configuration / advanced routing, the EA3500 is Ok to change, but I can not connect or more ping with the new 192.168.0.2 address.

  Anyone know how to set the ea3500 as a second back with 192.168.0.2 (or other IP) and not as a gateway?

  Use the bridge mode. Do not use the LAN - LAN configuration with the new EA series routers. Bridge mode is supposed to do all that and better.

  Configure the type of internet connection in bridge mode.
  the value 192.168.0.2/255.255.255.0 static ip, dns & gateway 192.168.0.1

  wire the internet port of the main router.

  Do not forget after the change in your computer needs to get a new IP address of your main router, for example reboot to regain access to the 192.168.0 network. *.

• default gateway is 98.218... not 192.168.1.1help

  I can't access the 192.168.1.1 Linksys been thru step page a lot and my time to pings... WiFi is turned on my wrt54 but I can not connect via laptop... any help is appreciated. I reset for 30 sec and when I go in to check the ip address after release and reset its still not 192.168.1.1.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  Windows IP configuration

  Name of the host...: DESKTOP
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.va.comcast.net.

  Adapter Ethernet Local Area Connection 11:

  The connection-specific DNS suffix. : hsd1.va.comcast.net.
  ... Description: Card Fast Ethernet of Linksys LNE100TX (v5) A
  developments
  Physical address.... : 00-12-17-4F-36-CE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 98.218.163.73
  ... Subnet mask: 255.255.252.0.
  ... Default gateway. : 98.218.160.1.
  DHCP server...: 68.87.73.12
  DNS servers...: 68.87.73.246
  68.87.71.230
  Lease obtained...: Wednesday, March 3, 2010 16:12:19

  End of the lease...: Sunday, March 7, 2010 16:12:19

• wrt54gx2 cannot access 192.168.1.1 through

  Even after using the reset button I can't access the wireless router to configure

  have you tried several mcobination of similar numbers

  ideas?

  Discovered my problem. I used the conector ENTRY ethernet to the router when I was trying to connect to the 192.168.1.1

  I used one of the ethernet connectors OUTPUT and she found

  Thank you

• Why won't my router save the changes to 192.168.0.1 DNS settings? (DGN2200v4)

  I just bought a DGN2200v4 and successfully connected to the internet. However, it took me ages to figure out how to save the changes made to DNS settings. (I wanted to use "OpenDNS" on 208.67.222.222)

  It turns out that if I connect to the router through 192.168.0.1, I can not change the DNS settings. When I click "Apply" after entering the new numbering, it takes 30 seconds or more for the progress bar for complete, but no change is made. i.e. it does not save the changes I made.

  If instead I connect to the router via www.routerlogin.net, changes are correctly saved after clicking 'Apply', with the progress bar by taking 30 seconds or more.

  I tried several times with consistent results. Why 192.168.0.1 not working then as www.routerlogin.net don't? I thought they were equivalent - the webpage 'Netgear genius' is identical on both...

  JC

  JCA says:

  
  

  Also, do you recommend make a factory hard reset after the firmware update, or there at - there no need?

  Sorry for the late reply.

  Personally, I tend to reset factory and re - enter the settings manually, unless I've saved a backup of this same version of the firmware. However, I use Netgear as Access Points routers and so I have little data to re-enter. To some people will say that a factory reset is useless and very often they would be correct, but the effects of factory reset no when it may be necessary are often difficult to predict. I was moderator on these forums for a dozen years, and have seen hundreds of threads where the solution to the problems after an update of the firmware has been at the factory to reset the router.

• I can log on to the site to download anyone know why?

  I can log on to the site to download anyone know why?

  It does not take a second or two to the list of countries is filled.  Try to empty your cach and try again.

• Why can't I access the modem 192.168.1.1 when connected to the wireless router?

  I'm unable to access my DSL Modem 6100 Westell using 192.168.1.1 when connected to the Netgear WNDR3400 wireless router. I can access it, however, when I connect directly to the ethernet port on the computer without going through the router. I've set up according to the instructions. Is it possible to correct the problem?

  This isn't a problem.  This is the standard behavior.  You are connected to the side LAN of the router that is isolated from the side WAN (uplink).  This is the mode of operation of routers.

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• Why did you have to change the layout of Firefox?

  I would like to know why you've gone and changed the provision in the Firefox?

  I'm still on Fx 3.6.18 because frankly 5.0.1 is horrible.

  Why did you have to change everything and make a difference. Why couldn't you have given us the same layout as 3.6.18 but with these new updates.

  I will never download Fx5. 3.6 was perfect.

  Also how can I contact Fx without upgrading?

  Firefox 3.6.19 is available here.
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

  grumpyolman - got a message by MP, saying do not post if he has nothing constructive to post
  
  Regard to the caveat, you can't choose who can post in threads that you start. James offered a suggestion to customize the toolbars by linking this technical support article. Almost everyone who helps users here is volunteer, especially now in the wee hours of Sunday morning (USA), so please treat us a little more sympathetic. Separate your anger by changes in Firefox, people who are here to help. Most of us don't like the changes either, but we change what we dislike interface customization.

  Please see this - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines