Need help logging on to 192.168.1.1
Hello
you try to reset my password for security - and the same problem as listed - tried using admin admin and password password to [url =http://www.192168-11.pw] http://192.168.1.1 [/ url], but seem to have myself locked out.
What should I do to unlock it?
This IP address is one of the two IP addresses as router manufacturers assign systematically to their equipment. This IP address indicates that the router is running on the 192.168.1 subnet and is the first device on that subnet.
To speak with this router properly, you must have your PC value to assign IP addresses automatically - through the DHCP settings on the router or assigned manually your PC to 192.168.1.2.
When you connect to a router, especially newer ones, it will ask you a login and a password.
We are NOT able to provide to those who, as they are assigned by the manufacturer. In some cases, this information is included in a booklet that came with the router. In other cases, it is the printer on a sticker located on the router.
Tags: HP Desktops
Similar Questions
-
Cannot Router Log-Out definition 192.168.1.1
I have a router E4200 v.01 and when I upgraded to the latest firmware (due to the exploitation of security) it seems that every time the configuration of the router (192.168.1.1) acess it ask me not or at the entrance of the admin and the password, use the wifi or wired... I want the usual process, whenever I go to 192.168.1.1 it will ask me to enter my admin and the password to change the settings for my router... no matter what help will do... Thank you...
Found the Solution... Just uninstall the installation of cisco software and the automatic connection will be gone... hope that cisco will fix software traore, like the old software... When you open the program you see a list of device connected to your router and can challenge and see the connection that has an error or what...
-
static PAT statements, need help...
Hi all
I am trying to set up a mail server, for the time being for reasons that I explain not rather, I can't put it on the demilitarized zone. So he is sitting inside the 515e Firewall interface.
I have the internal IP address of the server as 192.168.50.13 and inside the network I can send, receive, email etc. on this server. This is a new server, so I recently install my a records and MX. When the rattling of the entrance to the area the correct IP address is now assigned domain name. However, I can't see my e-mail server in the outside world. When you run a DNS query on the MX record, I get no response.
The problem is at the level of PIX. My static instructions do not seem to work.
One of my works of 4 static instructions (for our Services Terminal Server server), but the 3 other entries are not.
They are as follows:
static (inside, outside) MainOffice 3389 192.168.50.75 tcp 3389 netmask 255.255.255.255 0 0
static (inside, outside) tcp smtp MainOffice 192.168.50.13 smtp netmask 255.255.255.255 0 0
static (inside, outside) tcp MainOffice 192.168.50.13 pop3 pop3 netmask 255.255.255.255 0 0
static (inside, outside) tcp MainOffice telnet 192.168.50.201 telnet netmask
255.255.255.255 0 0
(the last entry is just to test and see if I could even host a standard telnet server from my local office win2k and see through the firewall, the test has failed, I can telnet in via the local IP address,.201, but not through the external IP, MainOffice.)
As often elsewhere in the config PIX seem to affect issues that I :), I included a complete running-config list below for those who would like to reference. Thank you for your time,
Another strange thing of note, with this current config I can't ping my IP external interface starting from IP external or internal IP. I have my entries ICMP set and thought I should be able to see, but can't. It is not as important a question as the above question.
Dave
::
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif ethernet2 security10 intf2
hostname YRPCI
domain yrpci.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
fixup protocol http-8080
fixup protocol ftp 22
names of
name x.x.71.8 ConstOffice
name x.x.81.11 BftOffice
name x.x.71.7 MainOffice
allow the ip host 192.168.50.10 access list acl_outbound a
allow the ip host 192.168.50.75 access list acl_outbound a
allow the ip host 192.168.50.201 access list acl_outbound a
allow the ip host 192.168.50.202 access list acl_outbound a
access-list acl_outbound allow the host tcp 192.168.50.203 a
access-list acl_outbound allow the host tcp 192.168.50.204 a
access-list acl_outbound allow the host tcp 192.168.50.205 a
access-list acl_outbound allow the host tcp 192.168.50.206 a
access-list acl_outbound allow the host tcp 192.168.50.207 a
access-list acl_outbound allow the host tcp 192.168.50.208 a
access-list acl_outbound allow the host tcp 192.168.50.209 a
access-list acl_outbound allow the host tcp 192.168.50.210 a
access-list acl_outbound allow the host tcp 192.168.50.211 a
access-list acl_outbound allow the host tcp 192.168.50.212 a
access-list acl_outbound allow the host tcp 192.168.50.213 a
access-list acl_outbound allow the host tcp 192.168.50.214 a
access-list acl_outbound allow the host tcp 192.168.50.215 a
access-list acl_outbound allow the host tcp 192.168.50.216 a
access-list acl_outbound allow the host tcp 192.168.50.217 a
access-list acl_outbound allow the host tcp 192.168.50.218 a
access-list acl_outbound allow the host tcp 192.168.50.219 a
access-list acl_outbound allow the host tcp 192.168.50.220 a
access-list acl_outbound allow the host tcp 192.168.50.221 a
access-list acl_outbound allow the host tcp 192.168.50.222 a
access-list acl_outbound allow the host tcp 192.168.50.223 a
access-list acl_outbound allow the host tcp 192.168.50.224 a
acl_outbound list of access allowed tcp 192.168.50.0 255.255.255.0 any eq smtp
acl_outbound list of access allowed tcp 192.168.50.0 255.255.255.0 any eq pop3
acl_outbound 192.168.50.0 ip access list allow 255.255.255.0 host 192.168.51.0
acl_outbound 192.168.50.0 ip access list allow 255.255.255.0 host 192.168.52.0
acl_outbound 192.168.50.0 ip access list allow 255.255.255.0 host 192.168.53.0
allow the ip host 192.168.50.51 access list acl_outbound a
access-list acl_outbound allow the host tcp 192.168.50.11 a
allow the ip host 192.168.50.13 access list acl_outbound a
access-list acl_outbound allow the host tcp 192.168.50.225 a
acl_inbound list access permit tcp any host MainOffice eq 3389
acl_inbound list access permit icmp any any echo response
access-list acl_inbound allow icmp all once exceed
acl_inbound list all permitted access all unreachable icmp
allow the ip host MainOffice one access list acl_inbound
acl_inbound list access permit tcp any any eq ssh
access-list 101 permit ip 192.168.50.0 255.255.255.0 192.168.52.0 255.255.255.0
access-list 102 permit ip 192.168.50.0 255.255.255.0 192.168.51.0 255.255.255.0
access-list 100 permit ip 192.168.50.0 255.255.255.0 192.168.51.0 255.255.255.0
access-list 100 permit ip 192.168.50.0 255.255.255.0 192.168.52.0 255.255.255.0
access-list 100 permit ip 192.168.50.0 255.255.255.0 192.168.53.0 255.255.255.0
access-list 103 allow ip 192.168.50.0 255.255.255.0 192.168.53.0 255.255.255.0
pager lines 24
opening of session
timestamp of the record
recording of debug console
logging warnings put in buffered memory
logging trap warnings
history of logging warnings
host of logging inside the 192.168.50.201
interface ethernet0 car
Auto interface ethernet1
Automatic stop of interface ethernet2
ICMP permitted MainOffice outside the host
ICMP permitted outside the host ConstOffice
ICMP allow any inaccessible outside
ICMP allow any response of echo outdoors
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
intf2 MTU 1500
IP address outside pppoe setroute
IP address inside 192.168.50.1 255.255.255.0
intf2 IP address 127.0.0.1 255.255.255.255
alarm action IP verification of information
alarm action attack IP audit
don't allow no history of pdm
ARP timeout 14400
Global interface 2 (external)
NAT (inside) - 0 100 access list
NAT (inside) 2 192.168.50.0 255.255.255.0 0 0
static (inside, outside) MainOffice 3389 192.168.50.75 tcp 3389 netmask 255.255.255.255 0 0
static (inside, outside) tcp smtp MainOffice 192.168.50.13 smtp netmask 255.255.255.255 0 0
static (inside, outside) tcp MainOffice 192.168.50.13 pop3 pop3 netmask 255.255.255.255 0 0
static (inside, outside) tcp MainOffice telnet 192.168.50.201 telnet netmask 255.
255.255.255 0 0
Access-group acl_inbound in interface outside
acl_outbound access to the interface inside group
Timeout xlate 08:00
Conn timeout half-closed 06:00 07:00 07:00 from the PRC related to udp h323 from 07:00 0:05:00 TR
p 0:30:00 sip_media 0:02:00
timeout uauth 07.30: absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.50.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-sha-hmac RIGHT
VPN1 card crypto ipsec-isakmp 10
correspondence address 10 card crypto vpn1 102
card crypto vpn1 pfs set 10 group2
card crypto vpn1 together 10 peer ConstOffice
card crypto vpn1 10 set transform-set RIGHT
vpn1 20 ipsec-isakmp crypto map
correspondence address 20 card crypto vpn1 101
card crypto vpn1 pfs set 20 group2
20 card crypto vpn1 peer BftOffice game
card crypto vpn1 20 set transform-set RIGHT
vpn1 outside crypto map interface
ISAKMP allows outside
ISAKMP key * address ConstOffice netmask 255.255.255.255
ISAKMP key * address BftOffice netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 sha hash
10 1 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Telnet ConstOffice 255.255.255.255 outside
Telnet 192.168.51.0 255.255.255.0 outside
Telnet 192.168.52.0 255.255.255.0 outside
Telnet BftOffice 255.255.255.255 outside
Telnet 192.168.50.0 255.255.255.0 inside
Telnet timeout 10
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 192.168.50.0 255.255.255.0 inside
SSH timeout 20
VPDN group pppoex request dialout pppoe
VPDN group pppoex localname xxxxxxxxx
VPDN group ppp authentication pap pppoex
VPDN username password xxxxxxxxxx *.
Terminal width 80
: end
Well, I'll be a son-of-b! * $@ !!! I don't know what I'm talking about then! Ha ha.
I'm just glad that you work, and maybe someone else watching tips can help us understand.
Thereafter.
-
Can't connect to 192.168.1.1 what so ever please help!
I tried to reinstall my printer (I used to have it put in place to print wireless from my lap top and my top of office that are the same brand names both run Windows Vista) the other day, my printer went on the fritz kept saying can not establish connection
So I uninstalled and went to reinstall using the floppy disk, Got to the section to make it wireless and he wants a network key, I put what I thought, I changed it to and he was wrong
I went and typed the IP address in the address bar that is supposed to take me to my Page of Linksys and it just sits there white saying white screen in the lower left corner (the lap top use Fire Fox 3 version), so I went to the high counter to the page that uses the new Internet Explorer , put the same IP address in in a first time, I was getting "page not found" or the Page cannot be displayed errors
then he crosses, but he gave me nothing but the search results for the IP address that he's not going to the Linksys page as it is supposed to
It's the IP address I'm typing in the address bar (as in all of THE Web sites and help sections on this site says to use) 192.168.1.1 I even tried another I.P. address on my computer and nothing
I need the network key for my printer connected wireless and it gets me upset, I tried at least 3 days!
None of sections help helped here, the help of cat live wasn't any help and I can't find the disc, I just moved and you don't know where it is, but I spent the last 3 hours searching boxes that I still unpacking.
my router is the wrt54g Linksys V. 6
Can someone help me I need my printer to the top and work A.S.A.P
What router are you using?
To view the web pages of the router:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is connected to the router.
In the non-working computer, temporarily disable your firewall software.If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.
If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.
If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. Check if your modem-router "" uses the same address as your Linksys router 192.168.1.x space. If this is the case, then the report with this problem and also specify the brand and model of your modem router.
If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.
If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system. It should work.
If the reset does not fix your system, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.
If you still have problems, make account, including the brand and exact model of your modem (not the Linksys router) number, your ISP and model and the version of your router. Also, please indicate your operating system.
-
Try to collect events to a log file and the Agent installed Linux and work - need help.
I modified liagent.ini by documentation... If I understand well it... actually I changed so many times my eyes hurt.
Here it is:
; Configuration of the Agent of VMware Log Insight. Please save it in UTF-8 format if you use non-ASCII names / values!
; The actual configuration is this file that is associated with the server settings to form animal - effective .ini
; Note: The agent is not necessary to restart after making a configuration change
; Note: It may be more efficient to configure Server Agents page!
[Server]
hostname = 192.168.88.89
; Name of host or IP of your Server Log Insight / load balancing cluster. By default:
; hostname = LOGINSIGHT
; Protocol can be cfapi (Log Insight REST API), syslog. By default:
proto = cfapi
; Server port connect Insight to connect to you. Default ports for protocols (TCP all):
; syslog: 514; syslog with ssl: 6514; cfapi: 9000; cfapi with ssl: 9543. By default:
port = 9000
; Use SSL. By default:
SSL = no.
; Example of configuration with the certification authority:
; SSL = yes
; ssl_ca_path=/etc/PKI/TLS/certs/CA.PEM
; Time in minutes to force the reconnection to the server.
; This option reduces the imbalances caused by the long lifetime as TCP connections. By default:
Reconnect = 30
[record]
; Logging detail level: 0 (no debug messages), 1 (essentials), 2 (verbose with more impact on performance).
; This option should always be 0 in normal conditions. By default:
debug_level = 1
[storage]
; Local max storage expiration (data + logs) in the valid range MBs.: 100-2000 MB.
max_disk_buffer = 2000
; Uncomment the appropriate section to collect log files
; The recommended method is to activate the content pack Linux server LI
[filelog | bro]
Directory = / data/bro/newspapers/2015-03-04
; include = * .log
parser = auto
I post it here, I have created a support pack?
Post edited by: I added a screenshot of the status of the personnel of kevinkeeneyjr
Post edited by: kevinkeeneyjr added liagent.ini
Ah! Yes, the agent is to collect real-time events. If no new event is written then it won't work. If you want to collect logs that have been generated before you use the importer of Log insight which was published with LI 3.3. I hope this helps!
-
I need help with an installation failure to interpret and troubleshoot a Setup log.
Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects. Shared Apple Final Cut X uses a different format that is not compatible with FCP6. Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.
Starting with OS X Lion, FCP6 would install not in Lion and thereafter.
According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle. He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.
Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:
https://discussions.Apple.com/message/26309669#26309669
I used this method with success to install FCS2 in Yosemite:
[click on images to enlarge]
However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:
First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along). I am unable to find such a method to post here.
Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:
If this element is not required, then maybe FCP6 can be installed successfully without it. And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.
It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.
Here is the post on MacRumors with pre-installed Setup log:
-
Need help, trying to decipher my Panel event logs control for security and applications.
Hi, I need help trying to figure out how to decipher my control panel the security event logs and logs application for account hacking.
All the advice to learn how to see what who are normal and what is malicious?
Occurrences of breach possible system, based on very high traffic for the opening of session and closing session and special privilege settings.
Please notify.
HP Pavilion DV9700 entertainment
Windows Vista SP1 Home Premium 32
I'll leave this thread closed, since I work with other people on another forum on this topic.
-
When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help
The solution is here:
-
Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop
Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE
This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.
I want to thank all in advance for your answers.
Nelson Santiago
Hi NELSONSANTIAGO,
1. when exactly you receive the error message?
2. is the Belkin easy transfer cable recognized by the Windows XP computer?
This file may be located on the Belkin Easy Transfer Cable installation disc.
For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.
-
My set-up agency & ABC developed for us. We no longer use the Agency. I have 2 log-ins - but 1) cannot change my billing settings & 2) cannot update models due to lack of access. Need help to change this.
Hi Rebecca,.
You should get in touch with our accounts team to work a solution to your problem. Drop them a note at: contact us | Adobe Business Catalyst
Cristinel
-
This is the message I get trying to disable my system startup items Configuration utility. I never had this problem before. I don't have my account and a guest account.
I need help! Thank you
A common cause of this is a spyware, Trojan horse or other parasite which means it's time to analyze for all these items. Be sure to include free AVG AntiSpyware in the analysis.
Then, when you have a clear idea, there are no parasites try TWEAKUI and set the account you want to auto logon.
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
Why couldn't log on to the 192.168.11.1
I want to install a password for my wifi on my own. But I could connect to 192.168.11.1 ip
is there a setting for the browser problem? How could I solve this problem.Hello
If you try setting using Wifi, it will kick you when you change the settings.
Router manufacturer set a default username and password for this account to the plant, generally using the same settings for all of their equipment.
What brand / model of the router?
Have you contacted support by the manufacturer?
Try to reset the router
Press and hold the Reset button on your router back to the factory settings. This will delete all your settings.
Lynksys Community guidance on the implementation of password
http://community.Linksys.com/T5/wireless-routers/how-do-I-set-a-password-for-my-wireless/TD-p/101431
-
I need help unlocking my windows7 someone has something of everything lock my computer I donot the password of my computer, please help me
Restart the machine should solve the problem.
-
Need help setting up WebUI for the Wireless Gateway
I have problem installing a Web UI for my demo project.
I just do temperature is a simple application of WSN on a node of thermocouple WSN-3121 and it logging on a RT NI 9792 wireless gateway.
Then, I wanted to create a web user interface and display whats in the user interface of the gateway - see the project.
SO I'm stuck with the web INTERFACE coming. I tried to read as much as I can but I still don't know what I'm doing wrong.
As far as I see it, I need to create a web service in the construction for my gateway specifications and place the gateway_main.vi like the vi to use. Then build and deployment. Once it happened, and I run the vi on the bridge, I created a Web user interface as shown in the picture, where it counts the the gateway web service using 192.168.0.16:8080 - that works very well.
When I run the Web interface, it is just and expires.
I am using LAbview 2010. Help, please.
Hello markza,
Your approach using the Web user interface designer and understanding its use case is quite accurate, the question lies in the web service, you have deployed. The VI you build as web service, which is gateway_main.vi, while loops inside and so cannot be used as a web service. The reason for the timeout is that your user interface Builder application calls the web service LV2010 and is stuck there for waiting time loops to complete. Also, the data type of cluster is not supported in the user Web interface Builder, so you'd have to break up from the entrance of the time of picking for the node wireless in two separate digital inputs.
I recommend creating a Subvi out of your code inside of the while loop inside gateway_main.vi. The Subvi must have two digital inputs to replace the cluster (as mentioned above) and do not have one of the Boolean inputs Start or Stop. Output would remain the same, that is, two doubles and a Boolean value.
I would like to know if this is useful and if you have any other questions.
Thank you!
Dieudonné jgfcnbh
The user of LabVIEW Web R & D interface generator
-
WRT160N V3 games problems! need help!
OK, here's our problem, I just moved about 6 weeks ago and have since purchased a wrt160n router, my brother and I can lose countless hours playing COD4 on our ps3 (2 on our network both wireless) we often have trouble connecting when playing @ simultaneously. He seems to get along with him immediately online, but when I log in game, I have to wait anywhere between 5 to 20 minutes, because it now says 'download settings', we thought it was a problem of the internet from comcast, but now I hear about port forwarding? I was power cycling think it was a bad internet connection and the strange thing is going online with the ps3 it gets first right line but the other must wait 5 to 20 minutes? someone has an idea? I can't find the help I need or if I can't find an article on this subject, it does not specify if the fix works for more than 1 PS3?
Our facility:
Cable modem
Router WRT160n
1 computer (wired connection)
1 laptop (wireless)
and 2 Playstation 3 (both wireless)
You have to open the Ports to your PS3 on your router. If this isn't the case, then I think it is perhaps because of this, you have to deal with this problem.
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
This settings are for your 1st PS3.
On the Configuration tab, change MTU size in 1452 and click on save settings...
Once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
(1) on the first line in the box, type Application in ABC, in the start box, type 80 and type of box in 80, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...
(2) on the second line in the box, type Application in DEF, in the start box, type in 443 and the type of box in 443, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...
(3) on line 3 in box from Application to the IAD, in the start box, type type in 5223 and type of box in 5223, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...
(4) on the fourth line in Application area type in JKL, in the start box, type in 3478 and 3479 end box type, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...
(5) on the fifth line of type Application in MNO, in the start box, box type in 3658 and type of box in 3658, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...
(6) on the sixth row in the box, type Application in PQR, in the start box, type 10070 to 10080 end box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings
(7) now assign IP on the ip address of your PlayStation:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
(8) also assign addresses dns on the primary dns of PlayStation:-4.2.2.2... Secondary dns:-192.168.1.1
(9) turn off your modem, router and PlayStation... Wait a minute...
(10) connect the power supply to the modem first, wait another minute and plug the router power cable, wait another minute, and turn on the PlayStation and test...
For you 2 PS3, follow this setting.
When you connect to the router configuration page, click on 'Application and Gaming' and then click on the "DMZ" sub-tab below, click on 'Activate' and in the IP Source address, type the IP address: 192.168.1.50 and clik on save settings.
Now you need to assign a static IP address on your 2nd PS3. 192.168.1.50 subnet mask IP address:-255.255.255.0 default gateway:-192.168.1.1... Primary dns:-4.2.2.2... Secondary dns:-192.168.1.1...
Turn off your modem, router and PlayStation... Wait a minute...
Now try to connect your PS3 to your wireless network and try to play this game and see how his work.
Maybe you are looking for
-
When this http://www.google.com/insidesearch/instant-about.html Google Instant is used, Firefox ask me whether to download a file named search. One blocks download appears for each letter I get.
-
I can't stop spam to fill my Inbox
original title: I can't stop * address email is removed from the privacy * fill my Inbox How can I stop * address email is removed from the privacy * fill my Inbox. Ive marked as dangerous etc, without success. They use my email address to send messa
-
Compaq DC7900 Ultra Slim: DC7900 Win7 update
Hello We are upgrading some old office for Win7 PC to access all the features of Office 365 and office of 2013. I have a DC7900 Ultra thin under XP with Intel Core 2 Duo E8400 processor 3.00 GHz: replace us the HARD drive with a new and larger. Do yo
-
Original title: passwords lost after reboot I have a user with multiple pop accounts and multiple rdp servers to which it connects When the laptop is connected to the domain he is allowed to save the credentials of rdp as usual and also its pop accou
-
EPMHFM-66161: Application created, but an error occurred enabling features
After completing all the pages of the wizard for creating application Hyperion Financial Management 11.1.2.4.100 (from the Administration of Consolidation in the EPM workspace), the demand creation process ends with the message"EPMHFM-66161: Applicat