Why custom themes work correctly?

Similar Questions

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• I have followed closely at least six different sets of instructions to make this transfer, and none of them worked.

  At the same time, I made five new ringtones of the song of the birds and their synchronized successfully to my iPhone. Now, I did one more and I cannot get transfers, although it see the upward in my iTunes library on my iMac. It's less than 30 seconds and he appears as the correct type (ringtone). I have followed closely at least six different sets of instructions to make this transfer, and none of them worked. I am running the latest operating system, the most recent iOs and the most updated iTunes on both systems. Help, please.

  < re-titled by host >

  Hello saelon,.

  Looks like you have problems of synchronization a ringtone from iTunes on your iPhone. I know how fun it can be to create and use custom ringtones, so I can understand why you would reach for help when he's not working for you.

  To find out how to properly synchronize your ringtones to your iPhone, see the article: syncing your iPhone, iPad or iPod touch with iTunes on your computer via a USB - Apple Support

  If you still have problems of synchronization of this tone, it could be that the tone is not appear in the iTunes ringtones section and/or is not selected to synchronize. This applies specifically in numbers 4 and 5 of the article above the synchronization.

  If your custom ringtones do not appear in the "Tones" section in iTunes, it is possible that they are not in the correct format. If you do not already have, the program that we recommend for creating ringtones for your iPhone is GarageBand, it's available for iOS and Mac OS X. check the resources below for more information on this:

  GarageBand 11: Create an iPhone ringtone

  GarageBand for iOS

  GarageBand for Mac OS X

  Thank you for using communities of Apple Support.

  Have a great day!

• The scroll bars to scroll all the way down (Custom Theme/skin)

  Just had a strange problem with scrollbars in my project goes all the way down to their journey.  I use on custom themes provided with Flash Builder - the theme of CobaltGraphical.  The functions of the scrollbar correctly sometimes but not others (for example, in a s:TextArea that it does not work).  Fortunately, again, it scrolls to the bottom of the content, but the thumb is always a decent amount upwards on the track (about 1/3 of the way approx.)  If anyone has an idea why this is happening, I'd love to know!  I was not wheat to isolate the reasons why again.

  I think you found the problem. I want to reskin of the thumb and add top = "0" bottom = "0" for the first group. This should force graphics of thumb to resize the thumb itself. Like this:

  
  
  ...
  
  
  
  
      ...
  
      
  

• My I phone 4 s as keyboard, some letters do not work correctly, p, q, and 123

  My I phone 4 s as keyboard, some letters do not work correctly, p, q, and 123

  Why do you ask in forum Sierra macOS?

  For your iPhone, try

  Force reboot

  http://support.Apple.com/en-us/HT201559

• Plugins do not work correctly (white-out fonts rendering)

  Hello
  I had a problem with all the plugins I have installed for about a month (since all 6.something FF). They all do not work correctly. When you use flash, all the fonts are blurry, there seems to be a "ghost" behind text which is shifted 1px right and left. It looks a bit like a bad clear-type setting. Video, however, pieces very well (probably because it is not "rendered" but passes to the graphics card more directly).
  When viewing PDF files in the browser, a "white cloud" seems to be above the whole plugin page (i.e. above the PDF toolbar). It's barely readable PDFs. From time to time, several parts of the pdf be readable when scrolling. For a long time, the toolbar displayed just fine, but only the pdf was unreadable.

  Here's what I've tried so far:
  -Updated FF (problem has improved for a week or two, then resurfaced)
  -Graphics driver update
  -Use another plugin (Foxit PDF, same problems)
  -looking for something such as "gamma" or "cleartype" in subject: config

  I should add that I consider myself an inexperienced user, and I must add that I put a lot of work in my profile (see the list of plugins). So I want to AVOID deleting my profile and leave again. I'd appreciate any help.
  Best regards

  Jonas

  You could start here: extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• Satellite L50 - C - 1 L 2 - USB 3.0 does not work correctly

  Hi, the new Satellite L50 - C - 1 L 2 has maybe a problem of USB 3.0. All the componetens that I connect to USB 2 works correctly. But some of these plugged into USB 3 doesn't work. A driver from Microsoft for USB 3.0 extensible Hostcontrolller v 1.0 is installed, no more. I cannot find any USB 3.0 driver in collection of driver of Toshiba. What can I do? They are a special USB 3.0 driver?

  Greetings, Michael

  im not toshiba but tell me how you know that your usb sata 3 do not work, you should have a usb 2.0 port and two usb 3.0 ports, if you use the usb 2.0 to usb 3.0 port device you will get only 2.0 speeds. USB 3.0 is backward compatible with usb 2.0 even peripheral id usb 3.0 according to manufacturer and specs of the device and how to use it. lets say spec is of high quality and again then you transfer files small speed should be fast that belong to 3.0 speeds but if you transfer large files then your currency becomes warm or hot and gets corrupted performance speeds down you can even get up to usb 2.0 speed and maybe that's why you think that your USB 3.0 ports do not work correctly , I hope that its clear things that worry you.

• Satellite M40X: After update Bios keyboard keys do not work correctly

  I have a Satellite M40X and I had updated the Bios to v 1.60. and now the keys u, m, 7 and the up arrow will not work correctly. The problem is that there is not another version of Bios to use.

  How can I solve my problem?
  Can I get the old version of the bios?

  Thank you
  Gabriel

  Hello

  No won´t you be able to recover the old BIOS. The only two options are:

  1. try to update BIOS and check if it work s
  2. in the case of no success, please visit the [ASP Locator | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and ask them for a checkup of material and repair.

  Welcome them

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• Control Panel does not work correctly.

  original title: salvation

  Hello

  My Control Panel in windows vista 64 bit does not work correctly, when I want to use functions such as catering or to uninstall a program or changing the State of account it just an error message like missing a file on each of them has its own error message, is it possible that I can restore the control panel to its previous state I tried windows restore, but it doesn't work.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html