Why has not assigned the c"" drive.

Similar Questions

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• How can I load my photoshop CS6 cd to a new Macbook that has no cd slot and does not support the cd drive external mac.

  How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.

  Jake

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

  Hello.

  I have a Qosmio F30-112.
  I tried to install the Windows XP Professional instead of the Media Center edition.
  However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

  I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
  But when I try to install XP Professional it always gives me the same error.

  Suggestions for the configuration of the BIOS or solutions for why this is happening?

  Thanks in advance.

  Hello

  Just a question:
  You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

  The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

  You should have a look here in this doc from Toshiba:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  and should also search this forum for other threads

  Good bye

• Satellite R630 - 11L - sometimes did not recognize the SSD drive

  Hi all

  I have a portable Satellite R630 - 11L and I just bought a Corsair F120 SSD for her, but my laptop a few times did not recognize the SSD drive and fails to start occurs. I searched on the Internet concerning the issue, but there are any topic related to my problem. in recent days, I have updated my bios but the problem remains. for example if I put the computer to sleep and he never wake ups as it should be. the blue windows screen 7 failure comes and an error message 'could not access the windows volume. If portable succesful started without problem occurs until I reeboot the computer. so most of the time I have to restart computer about 5 - 6 times to work normal. At the same time, I opened a topic on the corsair website. They told me to test my drive on another computer, so I test it on laptops, dell and hp to my friends, but there is no any problem don't like this.

  So I test my ssd on an another toshiba laptop R630 which has a different hardware configurations, the problem remains that laptop too...

  So I think toshiba may provide a bios update to fix this problem. This laptop really great, so I don't want to buy another.

  y at - it advice to solve this problem?

  concerning

  Hi machka,.

  > I think that here is the toshiba support forum. is not here?
  Here he s a Toshiba forum, that of right, but you can only chat with normal users like you and me. You will not find someone from Toshiba here.
  The forum is provided Toshiba but for Toshiba users to exchange experience on different products.

  So I think that the Quad is just. No one can say that every SSD is compatible with all computers. You need to understand this!
  There are hundreds of different players and computers on the market and I m sure that no one can test a new computer with all SSD on the market. This is not possible, because it takes a lot of time and more expensive laptops that I think.

  So if the SSD doesn't work, there is nothing that you can wait for the BIOS update.
  Otherwise, you must purchase another SSD. Alternatively, you can ask a service provider allowed in your country, maybe that technicians have already experience with some SSD in Satellite R630. Just ask for that, they are the first contact for you! :)

• Satellite P300D-12y - XP does not recognize the HARD drive

  Hello

  I want to install win xp on my new laptop.
  So I downloaded the toshiba page display driver. I use the driver sata this package to create a new installation disc.

  But the installation of win xp has not identified, my hard drive.
  Now, iam looking for the good driver-sata.
  The full package name is: ATI8.479.0.0000.zip

  Here is the content of the txtsetup.oem in the sata-file:

  ; This file installs the SiI 3112 serial ATA RAID in the framework
  ; installation text on Windows NT, Windows 2000, Windows XP,.
  ; and Windows Server 2003.
  ;
  ; Copyright (C) 2002-2003 by Silicon Image, Inc.
  ; All rights reserved

  Discs
  Disk1 = "Silicon Image SiI 3 x 12 SATALink Driver Installation Disk",\si3112.sys,\

  Default values
  SCSI = Si3112_XP

  SCSI ; Section HwComponent
  Si3112_XP = "Silicon Image SiI 3 x 12 SATALink Controller for Windows XP/Server 2003"
  Si3112_NT = "Silicon Image SiI 3 x 12 SATALink Controller for Windows NT 4.0 and 2000"

  Files.SCSI.Si3112_XP
  Driver = disk1, si3112.sys, Si3112
  INF = disk1, SI3112.inf
  ;; Catalog = disk1, Si3112.cat

  Files.SCSI.Si3112_NT
  Driver = disk1, si3112.sys, Si3112
  INF = disk1, SI3112.inf
  DLL = disk1, SilSupp.cpl
  ;; Catalog = disk1, Si3112.cat

  HardwareIds.SCSI.Si3112_XP
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_31121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_34238086', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_311215D9', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_B0021458', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_82141033', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_35121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1002 & DEV_436E & SUBSYS_436E1002', 'Si3112.

  HardwareIds.SCSI.Si3112_NT
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_31121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_34238086', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_311215D9', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_B0021458', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_82141033', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_35121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1002 & DEV_436E & SUBSYS_436E1002', 'Si3112.

  Config.Si3112
  value = parameters\PnpInterface, 5, REG_DWORD, 1
  value = ProblemDevices, "", REG_SZ, «»
  value = 'Maxtor 4D060H3 DAK05GK0', ProblemDevices, REG_SZ, ' "MaxMode = UDMA-5".
  value = ProblemDevices, REG_SZ, 'ST320012AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST330013AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST340017AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST360015AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, "ST380023AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3120023AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST340014ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST360014ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST380011ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3120022ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3160021ASL', 'Mod15Write '.

  Please can someone help me?
  Welcome them
  Matthias

  If you want to install Win XP and then access the BIOS settings, the compatible SATA AHCI mode and save the changes.

  Then start using the Win XP disk and install the OS.

  All that s!

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

  So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

  Update BIOS to the latest version 2.4.0

  In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

  To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

  So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

  It is difficult to find the cause of the problem, because this happens very rarely.

  Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

  When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

  Such computer is out of warranty.

  It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

  No idea what I could troubleshoot?

  Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

  While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

  Desu

  .. .once in a while...

  That will make hard to resolve this situation.

  • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
  • Have you tried another SATA data cable, or reinstall the existing at both ends?
  • Have you reinstall RAM and PCI card in their slots?
  • Have you used canned air to blow out the dust?
  • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
  • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

  If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

  and make sure you have the Office product key too...

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Search can not index the A: drive

  Do not assign the letter 'A' on a disk partition, because Windows Search does not index the A: drive. I made a Win7 installation on a system with a SSD boot drive and a conventional hard drives.

  I did my data to partition the A: drive and moved my files user for this partition. Windows Search could not find anything on this drive until I assigned a different drive letter to the partition.

  I know that there are very few machines with floppy drive.

  Is always the convention however that readers and B are reserved for floppy drives and will be until there is no more floppy drives on the left.

  If you connect a USB external floppy drive on your machine, it is the reader, NOT the D or E or F or any other letter.

  Therefore, it is not a good plan to designate any partition on a HARD disk as drive A...

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Dell Inspiron 531 s problem of power/does not recognize the hard drive

  My Office does not illuminate. I replaced the power supply. No, it powers on but does not recognize the hard drive. It gives an error as SATA 0 None SATA 1 no SATA 2 No. How do we know that the cables are properly connected. I feel like I'm very close to solving the problem but don't have a clue what that next step to follow

  The original PSU had 4 sets of cables and connectors.  The new power supply has 5 sets of son.

  aries7531

  From your post, I guess that the configuration of the system now recognizes the hard drive?

  If you do not have a floppy drive, then BIOS can find the player who isn't there, it returns this error.

  Make sure that the floppy drive [drive A] is disabled in the [BIOS] installation system, page 173, so that it is no longer looking for the disc and see if this stops the error message.

  If the hard drive is recognized in the configuration of the system, he now knows in windows "My computer" or in "disk management, [right click on 'My computer' and select 'Manage', then disk management]."

  Bev.

• Icon mail frozen. IPad rebooted, but it has not solved the problem

  RRebooting iPad has not solved the problem of frozen mail icon

  RObert

  Close the mail application and force restart the iPad. No data is affected by this.

  Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  To force the reboot your device, press and hold the sleep/wake button and the home for at least ten seconds, until you