Why I get to find Planning server in the Regional service console

Similar Questions

• Cannot open/Add essbase server in the Regional service console in SSL mode

  Hello gurus,
  
  I've set up SSL in EMP which ends at the web server level, but it seems that there is a problem with the Essbase server. When I try to add essbase server in the Regional service console in a secure mode it indicates what follows in the Regional service console Message Board
  
  Error: 1040142: NZERROR: nzos_Handshake failed (29024)
  
  Records verified Essbase, but it has the same error mentioned in it. I don't know where to go from here.
  
  Any help will be appreciated. Thank you.

  I think I might have the answer, EAS will use the RTC essbase, which has its own portfolio in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\wallet

  Now you can update the cwallet.sso in that directory or add a file essbase.cfg in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin
  wiith the location of the portfolio by using the config parameter

  WalletPath

  I also added the certificate for the cacerts in \jdk160_21\jre\lib\security file

  Restart the services and give it a go, works for me.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to connect to the administration via the regional service console server after 11.1.2.2 installation

  Hi gurus,

  I have installed and configured the services foundation, eas and essbase in windows 2003 server, afteEA r configuration I have observed that there are no tables for eas schema then I found that it was a bug and applied patch and set up again it has been successfully configured.

  When I tried to connect to the administration via the regional service console server. He States unable to connect to the administration server. everything else works.

  I see only 4 services in services.msc

  Oracle hyperion configuration manager

  EMP web server application

  opmn services

  OSH services

  all services are started with the exception of oracle hyperion configuration manager. I tried to start, but it does not start... is - this service has an impact on the administration server.

  I checked the logs, I can't find anything in easserver.log.

  any suggestions?

  Kind regards

  Kumar

  Looks like you have deployed web applications to a single managed server that is running on a port by default of 9000, then try to add the server to the Regional service as servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Export data to a drive that is mapped to the Regional service console server

  Hi all
  I have a question regarding the export of data from the Regional service console:

  can export us the data to the drive mapped in the Regional service console?

  Is it possible and how can it happen?

  We sent our local drives to the server and tried to export data from the console of Regional service to that mapped drive. The process has failed. Could you provide information why it go failed with the mapped drive.

  Waiting for your update.
  
  Thanks in advance

  Make sure that the user must have write access to the shared files (mapped drive)...

• Cannot find the default applications in the Regional service console

  Hi all
  
  When I opened the console of Regional service, I am unable to find the default applications in that. Kindly guide me
  
  Thanks and greetings
  Chimbu

  Hi Chimbu,

  Please check the Log-In of credentials of the user that has been created by you to connect to the Regional service Console.

  User must have administrator credentials.

  Thanks and greetings
  Saru

• Essbase Cluster node not get is expanding in the Regional service console

  Dear all,

  We use version Hyperion 11.1.2.1. I faced a new problem in Regional service console. The Essbase Cluster-1 node in the service console Regional expanding not when I tied to drilled her. For this reason, I am unable to view the applications, calculation scripts, etc. We need to run calc scripts and to add new members in the application.  Any body experienced this before? Kindly guide me to solve this problem issue.

  Thank you

  SC

  If you use the web console EAS, then make sure you are using a supported Java version, if it is supported, and then try adding the server essbase with the hostname instead of cluster.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Change the name of the server for the Regional service account

  Is there a way to change the name of the server for an EAS account without having to delete the account and add it again?  If this isn't the case, Palm, please put in this capacity.

  Thank you.

  Hello!

  The reason this not prevail as a fail-safe in the EAS Protocol feature.  From a point of view of corporate security, companies do not want the chance to sensitive business data being extract/put in one or more different servers that could very well not be themselves.  Any device using EAS must remove the Acct. and add a new.  Need help with data migrations that isn't the new server.

• Unable to connect to Essbase on Regional service Console server because of error 1042006

  Hello
  
  I installed the whole EPM 11.1.1.3 on Windows x 64 platform. When I try to connect the server essbase through the Regional service console, I get the following error:
  
  Essbase Server: localhost com.essbase.eas.essbase.defs.ServerCommands.Connect December 28, 2010 17:39:08 IST
  Error: 1042006: error network [10061]: unable to connect to [localhost:1423].
  The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol.
  Check your network connections.
  Also, make sure that the values for server and port are correct
  
  I checked the CFG file, which shows the correct port as well. I can connect to the Administration of Essbase server located on the same machine, but do not know why I get this error message. Below I have pasted the contents of the CFG file, in case where someone wants to cross check it out.
  
  
  CFG File indicates the following:
  
  ; The following entry specifies the full path to the JVM. DLL
  ; JvmModuleLocation D:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
  BPM_Oracle_DriverDescriptor "MERANT 5.2 OEM 32-BIT Oracle Wire Protocol.
  BPM_DB2_DriverDescriptor "MERANT DB2 Wire Protocol BITS 32 5.2 OEM"
  BPM_SQLServer_DriverDescriptor "MERANT 5.2 OEM 32-BIT SQL Server Wire Protocol.
  BPM_SQLServer_DriverDescriptor "SQL Server."
  ; BPM_Netezza_DriverDescriptor "NetezzaSQL".
  BPM_Teradata_DriverDescriptor "Teradata.
  BPM_ORACLEBI_DriverDescriptor 'Oracle BI Server'
  ; AuthenticationModule CSS
  ; AGENTPORT 1423
  ; SERVERPORTBEGIN 32768
  ; SERVERPORTEND 33768
  ; AGENTDESC hypservice_1
  AGENTPORT 1424
  SERVERPORTBEGIN 32768
  SERVERPORTEND 33768
  AGENTDESC hypservice_1
  
  
  Ideas that would be really useful.
  
  Thank you
  AJ

  There is a clue in the error message and the CFG file you posted.

  The error message:
  ...
  Unable to connect to [localhost:1423].
  ...

  CFG file indicates:

  ...
  ; AGENTPORT 1423
  ...
  AGENTPORT 1424
  ...

  The port default (1423) is commented out and changed in 1424. Your EAS connection must use port 1424 and not default to 1423.

  Try to use "localhost:1424" (without the quotes) in the Essbase server field when you add the Essbase server to EAS.

  Published by: Robert Armstrong on December 29, 2010 13:25 - typo

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• Why I get three, 11.8, downloads of the same "Adobe Flash Player"?

  Why I get three, 11.8, downloads of the same "Adobe Flash Player"?

  Going back to the real issue in message title for this thread

  Sorry, I'm not on your computer, and I don't have access to it. I could speculate 1 million and probably wrong on all of them. Run a thorough virus scan to check for malware. If you need, download Kaspersky TDSSKiller. http://support.Kaspersky.com/us/5350 it's free and there is a lot of other things / software V will not.

• Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Go to Adobe Creative Cloud

  
  

  Hi Rita,.

  For 1 EUR costs please see Adobe Store | Order FAQ and your online payment

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Get data from a member of the region partitioned customer

  Hello

  I have a partitioned area, this region is in all 3 members, is it possible to get data from this region but only from 1 member of the customer, if so how?

  What is your definition of the region on the server? The three members have given? You set redundant copies? In addition, if the optimizeForWrite() of the service method returns false, the function will run the smallest number of nodes.

  Follow these steps:

  The redundant copies of the value = 1

  Returns true for optimizeForWrite()

  Make sure that all members contain primary buckets

  Perform function like you do above

  Barry

• Why then, t I find video clips on the web page? Why do I not download them?

  All because I downloaded Firefox, I can't watch the video clips on a Web page, they must be uploaded to downloads of Firefox and then played on Real player. It's very embarrassing. How to get back to the way it was before you download Firefox?

  Please check if all your plugins are up to date. To do this, go to the Mozilla Plugin Check site.

  Once you are there, the site will check if all your plugins have the latest versions.
  If you see in the list of plugins that have a yellow button to update or a red button update now , please put to update these immediately.

  To do this, click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps in the installation process.

• Why I get from Google to BING all the time?

  I listed as my search engine in the preferences, as well as my homepage to google, and I went to BING often in the middle of research.  Driving me crazy just because I do not know why and I feel like I should be able to control it.  Curious! "

  Safari > Preferences > Extensions

  Select "Omnibar", and then click Uninstall.

• Why can't I find Bit Locker on the laptop?

  Original title: I can't find BitLocker in my laptop

  . I ve windows 7 home basic OS. If I go to control panel-> system and security control, I can't find BITLOCKER... How can I activate it?

  Its only available in the Enterprise and Ultimate versions