Why is incorrect dt when TDMS log file is exported to ASCII text?

Similar Questions

• listener very slow when listener.log file reach the size 4G

  client cannot connect to the instance, and has an error:
  ----------------------------------------------
  AMT-12560: TNS: Protocol adapter error
  AMT-00530: Protocol adapter error
  Windows 64-bit error: 53: unknown error
  TNS-12518: TNS: listener could not hand off client connection
  AMT-12571: TNS: packet writer failure
  AMT-12560: TNS: Protocol adapter error
  AMT-00530: Protocol adapter error
  Windows 64-bit error: 54: unknown error
  
  I restart the receiver, but it is very slow to boot completely.
  I found that the listener.log file is size 4G, when I delete this file and restart receiver, the listener is normal.
  
  If the log file has a 4G limited by oracle?
  
  Version:
  -------------------------------------------------------------------
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  Bug 9497965 - Win: listener startup fails Due to listener.log size is greater than 4 GB [9497965.8 ID]

  better in time you should clear the logs and keep it less than 4 GB.

  Thank you
  Christian Christmas Pal Singh

• SIZE OF THE REDO LOG FILE

  
  Hello

  I got an error message when I add me new group. log files I searched and found the answer on the form. Ago 4 M minimum size of 11 g R2 log file size.

  My question is why a log file size depends on DB_BLOCK_SIZE? This parameter is set to the component structures of memory that create an instance when a log file is an operating system file that depend on the version of the OS not DB_BLOCK_SIZE.

  Thank you.

  
  SQL > alter database add logfile group 4 'c:\app\asif\oradata\employee\redo04.log' size 1 m;
  alter database add logfile group 4 'c:\app\asif\oradata\employee\redo04.log' size 1 m
  *
  ERROR on line 1:
  ORA-00336: 2048 blocks the size of the log file is minimum lower than 8192 blocks

  
  SQL > show parameter db_block_size

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  Whole DB_BLOCK_SIZE 8192
  SQL >

  You are assuming that the redo log block size is the same as the database block size. This is not correct.

  The error indicates that 8192 is the minimum number of blocks of a redo log file. The documentation states that the minimum size is 4 M. For example, you can deduct your redo log block size is 512 bytes.

  Here's some more information about the size of redo log, the documentation block.

  Unlike the database block size, which can always be between 2 K and 32 K, redo log default files to a block size that is equal to the size of physical sector of the disk. Historically, it is usually 512 bytes (512 b).

  Some new large disks offer 4K sizes byte (4K) to increase sector efficiency improved format and ECC capabilities. Most of the Oracle database platforms are able to detect this bigger sector size. The database then automatically creates files redo log with a block size of 4 K of these discs.

• Cannot publish get error message - log file is not being created

  When you try to publish a project of FlashHelp, I get an error message window that says "Publishing has been cancelled. "Cannot create the file: (name of the project) .log"
  
  When I click OK in the message window, the publish process will stop. However, if I look in the SSL folder, I see the log file. It is a text file.
  
  I had this problem in January 09, but it seemed to be a problem with the password and the access path in the command FTP window. I fixed it, and it worked fine. However, I have not published since the end of January. Now, when I try to publish, it gives me the same error message. I checked and examined the window FTP fields, and they are very good. But I still get the error message and cannot publish.
  
  Why?
  
  I need to get this problem fixed as soon as POSSIBLE and make sure it won't happen again. What is strange, is that I have 3 other projects and it is the only 1 who receives this error message.
  
  

  Colum
  Thanks for the memory jog, that was the problem. They had to move the server, so the ftp info was wrong. It is probably the same problem last time, but I couldn't remember because I tried so many things before we had solved it.

• delete the log file archive

  Hello
  I use oracle 10g on linux, I want to delete archive log file automatically, there is no way to do this.or can someone tell me scripts to do this.ur help on this is very appreciated
  
  Respect, s
  Umair Iqbal

  Hello

  Can you please let us know why you want to delete the log file archive?

  BTW, you can use RMAN to achieve by archiving log backup and delete the original file using the following command:

  Backup archivelog all delete input;
  

  Concerning

• How to reduce consumption of Essbase log file disk space?

  Due to some problems, we must keep the Essbase application at the INFO level log to trace a special message. However, we can not control the size of the log file and the use of these log files from the disk.
  
  We found that there is some configuration settings that can control the maximum file size of each log file:
  
  AGTMAXLOGFILESIZE
  APPMAXLOGFILESIZE
  
  However we can not yet found a good setting that may limit the maximum use of disc, or the mechanism of rotation of newspapers to recycle the log file or we will say that we must keep the 5GB log file in the log 5 and recycle when the log file is full.

  As Glen has rightly pointed out, you can create a routine that runs according to a schedule.

  In the past, I wrote apps/scripts that check the size of the logs for each application, if it exceeds the set limit, copy of newspaper, zips the newspaper, then removes the log (essbase command, not just a delete because there is a lock on the file)

  This routine can be written in several languages.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Folight - SQL Server 2008 R2, DBSS - error log file size

  Hey guys,.

  Try to understand why the alarm DBSS - size of error log is shooting. Why does foglightr not read these log files? Is this a mistake in my setup?

  "The size of the file SQL Server log Archive 6 is 2 685,00 KB, which is too big for the scan. Analysis is disabled.  "

  Hi Daniel,.

  There is a default setting of 1 024 KB for this rule in order to avoid possible performance issues by reading a log file that is too large. You can change the limit by checking the boxes next to the instances of SQL Server in the data base Control Panel and proceed to the Administration of the Agent. Select alarms and then DBSS - size of error log and change the threshold. You can try to 3000 as a value.

  Kind regards

  Darren

  

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• Why don't FCP_LOGIN appears in the log file

  We have a shell script that is saved and runs correctly in a dev environment. When impose us this to a new environment, we get the following values that appear on the log file.
  FCP_REQID
  FCP_LOGIN
  FCP_USERID
  FCP_USERNAME
  FCP_PRINTER
  FCP_SAVE_OUT
  FCP_NUM_COPIES
  
  My main concern here is that the name of user and password apps is displayed in plain text. Why it appears in one case but not the other? Any ideas how to disable this option? Could be a parameter in the query competitor?

  900441 wrote:
  We have a shell script that is saved and runs correctly in a dev environment. When impose us this to a new environment, we get the following values that appear on the log file.
  FCP_REQID
  FCP_LOGIN
  FCP_USERID
  FCP_USERNAME
  FCP_PRINTER
  FCP_SAVE_OUT
  FCP_NUM_COPIES

  My main concern here is that the name of user and password apps is displayed in plain text. Why it appears in one case but not the other? Any ideas how to disable this option? Could be a parameter in the query competitor?

  Please see these documents.

  Use encrypt to prevent the Pwd Apps will appear in the journal/Sql Script [377858.1 ID]
  Option Encrypt: Apps passes failed to fcp_login [144850.1 ID]
  How to create a custom program that is simultaneous with host method and passes the parameters to the Script Shell [ID 266268.1]
  Configuration Guide for Oracle E-Business Suite 11i [ID 189367.1]
  Configuration Guide for Oracle E-Business Suite Release 12 [403537.1 ID]

  Thank you
  Hussein

• Why archive log file size constantly change?

  I have a question related to the size of the archive log file:
  I constantly receive a different size to the size of the log file archive, of course, they are smaller than to the size of the log file.
  A guru can explain to me: what possible reason could be?
  Thanks in advance!

  It can happen due to several reasons:

  When you perform a manual archive (via ALTER SYSTEM ARCHIVE LOG CURRENT/ALL)
  When Oracle must respect your ARCHIVE_LAG_TARGET (defined in seconds)

  Unless you do a manual check-in, your parameter ARCHIVE_LAG_TARGET is the reason why you see Archives of logs with different sizes as Oracle has archived the redo log as soon as the time ARCHIVE_LAG_TARGET is reached. Even if the redo log is not full, Oracle will always have to archive the redo log.

• "Error opening installation log file" when installing Photoshop Elements 10

  I bought Photoshop Elements 10, first Elements 10... I am the first to download it without problems, but I can't get the photoshop download. It's the msg I get when I try to dl it "error opening installation log file. Verify that the specified log file location exsists and is writable ". Not sure why I can download one and not the other because they are both on the same disk. In the program I bought, I have a 5 DVD. Any suggestions?

  Thank you

  Title of the message was edited by: Brett N

  Install the first Elements, Photoshop Elements

  Mylenium

• I have windows 7 and mozilla firefox browser why do I get breaking photo when I log on the bingo site

  I have windows 7 mozilla firefox browser why can I get a picture of the game im playing skinning and slow when I log on a bingo site

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  See:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• in the output log file bit 00's are added, why? (Do not run the attached vi. It disables all devices in your system)

  Hi all

  I've attached a zip file when co-existence.vi is the main file of vi that communicates with a USB device and returns some responses of ATR.

  The answers are stored in a log file. I have attached the log file. In the log file in three places while displaying ATR, get added some unwanted 00's. Please help me how it is and how to remove it?

  Thank you

  Mathan

  [Note: (not to run the attached vi.] It disables all devices in your system)].

  It seems that the duration depends on the value you get out of the dll (dwARTLen). You have wired it as 100, so it seems that the dll simply returns the entry. Maybe you want to check the documentation for the dll on the way to get the actual length.

  A large part of your code is very confusing...

  • You have several subVIs that are essentially the same, but with different names. Not one of these not enough?
  • What is the purpose of the loop IN the adhc.vi? Since you autoindex in a table of a line, it will be executed only once, and the result is the same as if you would remove the loop FOR.
  • Your main VI is extremely repetitive with lots of duplicate code. You have 12 instances of the file name constant, would be enough! Enable.VI is identical to disable.vi, except for a constant of diagram. Much the same constant string ("ATR: ', ' peripheral access card:", etc. "), once again, everyone is enough.

  Here a nice state machine would make all the difference.  You need only about 10% of the current code, eliminating all the rehearsals.

• Error message saying signature not valid fatal error, System log files are missing or damaged 426 error when I try to install Windows XP.

  I get an error message that I need help to solve

  I need help making past error fatal error of invalid signature, the system log files are missing or damaged 426 error when I try to install windows xp pro on the new hard drive I upgraded too.  He was the original operating sysytem who accompanies him.  I use an installation cd from microsoft windows xp with service pack 3.  Whenever I get the same message and it wasn't to restart with the cd and it install all over again, can you help me please?

  Well, you need to format the hd before xp can be loaded onto a new drive...

  If it's a microsoft retail xp cd, installation cd, boot the pc on a cd, to the xp cd menu, select install xp,.

  Okay, choose the option to format before xp begins to install, the rest is automatic. In addition, do

  of course, the old hd is unplugged, plug once xp installed, disconnect printers, etc...