Why is my HP photosmart all-in-one printer 4700 display error

Similar Questions

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

  I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

  HP Photosmart all-in-One Printer series - B010

  MacBook Pro / 10.8.1 (Mountain Lion)

  Router

  Hi yadin7,

  The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

  You can find the specifications listed below:

  Input/output
  USB port: Rear hi-speed
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

  Kind regards

  Shlomi

• HP Photosmart all in one printer C7280 Windows Vista 32 bit.

  My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

  I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

  This problem?

  Thank you

  ducksterman.

  Hi again,

  If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

  Or

  To restore the default settings

  1.

  Press Setup.

  2.

  Press to select Tools, and then press OK.

  3.

  Press to select Restore Factory Defaults, then press OK.

  The default settings are restored.

  Let me know if that helps...

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• Need help printing on my C7280 Photosmart all-in-one Printer

  I use a Wireless/1100 Inspiron and have been able to print on my Photosmart C7280 all-in-one printer, but now I can too.  Help, please.

  Hello

  1. what happens when you try to print?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message trying to print?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the information is useful.

• HP All in one Printer 4515: HP All in one printer 4515 Setup error

  I bought a HP All in one Printer 4515. I started installation, in order to implement, it worked fine, I scanned the page to adjust the calibration of the toner. During this time blue light which is used to the wi - fi connection always blinking since the beginning of the installation of the printer.  I do know that if the flashing is right, I found it strange...

  I downloaded the www.hp.com/ePrint/DJ4510 Installer and started installing.

  When I started to configure the wi - fi connection, I failed. Installation software wrote me to retry the configuration.

  I did and the printer display began flashing, he wrote to me that there is a mistake of the printer, and I have to stop him.

  So I stopped, but the blue screen appeared and he wrote: BV815424C. Because then I can not start even the printer, because when I press the power button and start the printer on the printer screen, the same message appears that I need to stop it and it is possible that this situation repeats itself all the time and the blue screen appears with BV815424C.

  This situation occurs for the second time. I have new bougtht printer 2 weeks ago and the same situation has happened, it's HP second All in one 4515 printer that I have instead of the first damaged...

  It is a problem of the printer and I need to return for the second time or is it possible to fix it?

  Hey @dijanas,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have some problems with an error code on your Deskjet Ink Advantage 4515 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. It is this document explains How to resolve error messages on your printer.

  If after following the instructions above, you are still unable to initialize the printer and the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

  I hope this helps with the error message and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Photosmart All in One Printer: HP C5280

  I have a HP Photosmart C5280 printer all in one

  I am unable to print printable discs as it happens with a massage saying a recognized authority as a device that gives direct printing on Cd/DVD discs.the printer works ok, except for printing to disc function

  I formatted my drive hard as I had windows errors 7 0n and found my C5280 everything works before I reinstalled windows and HP C5280 HP software software you Site.

  I hope you can help because it is a very good printer

  Hi @bluesman38,

  Welcome to the HP Forums!

  I see that you can not print on Cd/DVD discs with your printer HP Photosmart c5280 on Windows 7. And I'm happy to help you!

  Please see this post, Re: HP photosmart C5280 usually print on cd/dvd, by @GGtech. As well as this post, HP photosmart C5280 wont print on cd/dvd, to @Shane_R.

  Hope one of these solves your problem!

  "Please click the Thumbs up icon below to thank me for having responded."

• Printer HP Photosmart all in one printer scanner

  I can not get this camera to be my default printer.  It has been disconnected for a while and now has the yellow!.    I can get a different default printer but it is not what is wanted.

  Why do not all reinstall the printer?

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/printers

  below is a link to hp support

• color print, stopped my photosmart All in one printer c310. How should I do

  My printer has stopped printing in color

  Inke levels are varied but have green ticks

  HP All in one C310 Printer series

  Windows 7 64 bit

  Please check the ink levels... you use the original Hp cartridges? not charging?

  If they are authentic, not empty... can you pls. update your firmware: pls click the link:

  It's the last troubleshooting, if you replace your printhead still pending... I would like to know what happened

• 7525 photosmart all-in-one: printer says wireless, but do not print

  We moved our headquarters to a new location in the House. After you reconnect all devices, the printer seems to work (in his view).  Network test results "spent." When I opened a doc and tried to print, it would not, telling me printer was not in the network. Enter new password for ISP provider crossed wireless configuration. Still not printing.

  I uninstalled and reinstalled the printer. Still will not print. I disabled Norton Internet Security where he was blocking the process. I downloaded Team Viewer so that my son could see if he could help me, but couldn't connect to it to use it. I tried to download HPPrint and doctor to Scan, but it will not download. Any ideas?

  Hi there @MI_OHlady.

  Welcome to the forums

  I understand that you have moved your location of printers and it is not printing via wireless network.

  You mentioned that the print and Scan Doctor will not download, and this could be a problem on the computer or with the internet connection. Could try to use another web browser and try to download and run the printing and scanning Dr. again? I would like to know what are the results of the tool.

  Also, try to make copies of the front of the printer and let me know if they work, or if you see errors.

  I hope to hear from you

• Epson all-in - One Printer Driver Runtime error

  I'm having trouble with the installation of the printer drivers for an all-in-one Epson Stylus 7520 which is shared on a network.  When you try to install the software, I get this error:

  Runtime error!

  Program:

  C:\Windows\system32\spool\DRIVERS\x64\3\E_YATIHDA. EXE

  R6034

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.

  This error will continue regularly until I have turn off the print spooler in services tab.  If I use the print command in any program, this program will immediately freeze and require a force close by the Task Manager.  To completely uninstall the software print spooler must remain disabled, else it will give an error that it is in use.  After uninstalling using Add/Remove programs so that I have to manually go in system32\spool\DRIVERS\ files remove traces remains of the software (including the offending .exe program).

  When I say the machine to locate the drivers alone, it will bring up a window with the "WSD printing device" and an icon indicating that it is busy, which will eventually turn into a red X indicating that he failed to find a driver.

  Default Epson software package includes bells and whistles as a utility that monitors ink levels and checks the firmware updates, which inevitably cause this error.

  But Epson also allows you to download driver separately this package.  When I install just the driver, no error message appears, the computer communicates with the printer and use the functions scanner and fax without error (it displays its IP address, MAC address and even to send print orders), but it does not actually print a file.  The work appears in the status display of the printer on the computer, but eventually the delay and error.

  The machine that gives me the error is an Acer with Windows 7 Pro installed by the manufacturer.  It's a whole new machine.

  These same drivers work without error on a HP Windows 7 Home machine installed by the manufacturer, as well as several XP machines we are trying to eliminate out of use.

  Both machines also have a Konica Minolta printer installed that they will print to any question.

  After researching the issue, Epson insists that there is nothing wrong with their pilots, but I will communicate their support today.  If they come up with a solution I will try to remember to post it for the benefit of others.

  I have tried many suggestions available online without any change in the results:

  Tried uninstalling and reinstalling several times since the epson CD.

  Run windows update.
  Tried uninstalling and reinstalling several times with the latest drivers available on the epson site.

  Checked that I use the 64-bit and 32-bit drivers.

  Run "scannow" which gave no abnormal results.

  Delete all the files in the AppData/Temp folder

  Reassigned to the location of the temp folder.

  Tried to install with the Windows Firewall disabled.

  Removed from the McAffee trial provided with the machine entirely.

  I have not tried to uninstall and reinstall the software C ++ yet (as suggested in similar topics) that other users have pointed out, it does not solve the problem.

  In my case, this was due to a conflict with Acer Proshield. I removed Acer Proshield, then the driver is installed correctly.

• Install the HP Photosmart all-in-One printer-D110a malfunction

  I can not the printer HP D110A properly uninstall or reinstall on my computer.  I have a desktop HP Pavilion with Windows 7 64 bit with an Intel Core processor.

  I went through many suggestions on the HP support site, more than once, and the installation failed every time with the message "the system cannot find the file specified."  This message is displayed if I install more software HP Photosmart and pilot or just the HP Photosmart basic drivers.  I went to Control Panel programs and features and uninstalled all HP without change.  I also deleted temporary files and folders without change.

  Once that occurs, I hit very well and it sends a report to HP and shows me an error situation code: 32438568.  The program starts then uninstall points, but - error after a few minutes with the message "HP Installer uninstaller has stopped working".  In the background grey, I can see its order to step 9/11, to the location of the progress of the installation of Software\Microsoft\Active.

  I also tried the HP printer program and searched the forum without success help files.  Please help, I want to just install my printer.

  Problem solved!  Here's what I did to get the printer D110a Photosmart software and drivers installed.

  1 - Download the full version of the software on the HP site.  Do not choose the version of the base drivers.  We will remove unnecessary items in another step.

  2 turn off your antivirus, antispyware, and firewall.  Make sure that you disable all of them.

  3 disable startup: click on the Windows icon in the system tray, type msconfig in the search field and click Enter.  Choose "Selective startup" and uncheck "Load Startup items".  Click 'Apply' and then 'OK '.

  4 restart your computer.

  5 - Disconnect the USB cable from the computer.

  6 - click on the file of the software that you downloaded.  During installation, you will arrive at a screen of welcome from HP with several buttons.  Click on "install".  In the next screen, there are 3 or 4 links.  Click on one, titled, 'Software' or 'select software.  Uncheck the print smart Web, HP Photo Creations and Customer Participation program.  (You will be able to install it later if you wish.  Now we want to simply get the print, scan, and copy functions work).

  7 - proceed with the installation.  Connect the USB cable when prompted.  If you can, test by making an impression and then a scan.

  8. remember to go back to msconfig and check 'Normal Startup'.  Then click 'Apply' and 'OK '.

  9. turn your firewall, antivirus and antispyware programs turn it back on.

  It was the only thing that worked for me.  I found a large number of these instructions in separate solutions of HP and help articles, but I had to put it all together to get the software and drivers to install correctly.  I hope this helps someone.

• HP Photosmart all-in-One printer-D110a Installation failure

  After spending the better part of today trying to install this printer on my new Dell Inspiron 660 (Windows 7 Home Premium 64-bit), I'm ready to renounce HP printers.  This printer is less than a year and I had it installed on my old Dell Dimension, where he worked with the exception of not being able to to perform a scan of the touchpad.  A big disadvantage, since I had to go to the HP Solution Center and analyze manually.

  But let's go back to our days, I went through all the exercises on the HP support site, more than once, and installation has failed each time, "Fatal Error 1935" as well as MSI. Scan.  Since online search made me think that the 1935 FE could be a Windows 7 problem, I contacted Dell support.  Dell technology has been able to install the printer; He said that he install it in "compatibility" mode  How a normal user is supposed to know this?  There is something left on my desktop - PS_AIO_07_D110_Full_Win_enu_140_126.  I have to keep it?

  In addition, Scan always does not work since the touchpad.  Nor can I open the HP Solution Center.  It returns the message:

  "HP Solution Center cannot work because your device installation is not complete.

  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

  If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the start menu. »

  I don't see any HP help files in my Start menu.  There is a HP folder in programs, filled with a ton of shit I don't need except for the simple instructions, basic to connect the printer to my pc.

  The installation has already been tried, more than once, with the Original CD.  The installation was already made, more than once, the option to download on the HP support page.  And with all the L4 uninstall, I probably restarted the pc more than 30 times today.

  And for growing more, my Temp folder is full of garbage, much of it with HP in the name of the file, as well as six 7z files *.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4023246

  Install and let me know the result!

  Have a great day and a great weekend!

  -Spencer

  PS you should not have to run in compatibility mode with the Win7 this softare, you have to do if the software you are trying to install is something like software WinXP (for example) on a Win7 machine.

• Photosmart HP5520: HP 5520 Photosmart All in One printer does not print

  Hello

  I was away for a few weeks and when I got home that my HP 5520 would not print. Troubleshooting in devices and printers did not fix it. The full current confirmed printer HP S/W installation wizard and the drivers installed. The installation wizard produces a test analysis, but not a test print.

  Print and scan doctor also identities printer OK but cannot produce a test print, even if it did not produce a test INTERNAL page. Printing and scanning identified an issue with the S/W which "cannot be fixed without uninstalling and reinstalling" the software.

  Software reinstalled as suggested, but it has stalled on "checking network das" so reinstal is not completed properly I guess. Now, I seem to be less well off than I was before.

  I checked the print spooler and its running ok.

  I checked windows udates and they are all up to date

  I even tried restoring the system in desperation, but that has not changed anything either.

  I tried using just USB connect - no effect

  I have true wireless use only for connect - no effect

  I am running windows 10 on HP pavilion laptop.

  I'm running out of ideas on how I can print again, so any help would be greatly appreciated!

  Thank you very much

  This is the solution, for me at least. I was convinced there had to be a solution of windows related to this, but despite several attempts, I could not get the answers so ultimately I reset the PC and it took about an hour, but when he did all broken back in life and has worked as before. Bit of a pain having to reinstall software but it was worth it.